user/sven/linux.git/arch/arm/kernel, branch v4.9.220

ARM: 8957/1: VDSO: Match ARMv8 timer in cntvct_functional()

2020-03-20T08:07:58Z

commit 45939ce292b4b11159719faaf60aba7d58d5fe33 upstream. It is possible for a system with an ARMv8 timer to run a 32-bit kernel. When this happens we will unconditionally have the vDSO code remove the __vdso_gettimeofday and __vdso_clock_gettime symbols because cntvct_functional() returns false since it does not match that compatibility string. Fixes: ecf99a439105 ("ARM: 8331/1: VDSO initialization, mapping, and synchronization") Signed-off-by: Florian Fainelli Signed-off-by: Russell King Signed-off-by: Greg Kroah-Hartman

ARM: 8848/1: virt: Align GIC version check with arm64 counterpart

2020-01-29T09:24:18Z

[ Upstream commit 9db043d36bd379f4cc99054c079de0dabfc38d03 ] arm64 has got relaxation on GIC version check at early boot stage due to update of the GIC architecture let's align ARM with that. To help backports (even though the code was correct at the time of writing) Fixes: e59941b9b381 ("ARM: 8527/1: virt: enable GICv3 system registers") Signed-off-by: Vladimir Murzin Reviewed-by: Marc Zyngier Signed-off-by: Russell King Signed-off-by: Sasha Levin

ARM: 8847/1: pm: fix HYP/SVC mode mismatch when MCPM is used

2020-01-29T09:24:18Z

[ Upstream commit ca70ea43f80c98582f5ffbbd1e6f4da2742da0c4 ] MCPM does a soft reset of the CPUs and uses common cpu_resume() routine to perform low-level platform initialization. This results in a try to install HYP stubs for the second time for each CPU and results in false HYP/SVC mode mismatch detection. The HYP stubs are already installed at the beginning of the kernel initialization on the boot CPU (head.S) or in the secondary_startup() for other CPUs. To fix this issue MCPM code should use a cpu_resume() routine without HYP stubs installation. This change fixes HYP/SVC mode mismatch on Samsung Exynos5422-based Odroid XU3/XU4/HC1 boards. Fixes: 3721924c8154 ("ARM: 8081/1: MCPM: provide infrastructure to allow for MCPM loopback") Signed-off-by: Marek Szyprowski Acked-by: Nicolas Pitre Tested-by: Anand Moon Signed-off-by: Russell King Signed-off-by: Sasha Levin

ARM: 8802/1: Call syscall_trace_exit even when system call skipped

2019-11-25T08:53:49Z

[ Upstream commit f18aef742c8fbd68e280dff0a63ba0ca6ee8ad85 ] On at least x86 and ARM64, and as documented in the ptrace man page a skipped system call will still cause a syscall exit ptrace stop. Previous to this commit 32-bit ARM did not, resulting in strace being confused when seccomp skips system calls. This change also impacts programs that use ptrace to skip system calls. Fixes: ad75b51459ae ("ARM: 7579/1: arch/allow a scno of -1 to not cause a SIGILL") Signed-off-by: Timothy E Baldwin Signed-off-by: Eugene Syromyatnikov Reviewed-by: Kees Cook Tested-by: Kees Cook Tested-by: Eugene Syromyatnikov Signed-off-by: Russell King Signed-off-by: Sasha Levin

ARM: prevent tracing IPI_CPU_BACKTRACE

2019-06-22T06:17:12Z

[ Upstream commit be167862ae7dd85c56d385209a4890678e1b0488 ] Patch series "compiler: allow all arches to enable CONFIG_OPTIMIZE_INLINING", v3. This patch (of 11): When function tracing for IPIs is enabled, we get a warning for an overflow of the ipi_types array with the IPI_CPU_BACKTRACE type as triggered by raise_nmi(): arch/arm/kernel/smp.c: In function 'raise_nmi': arch/arm/kernel/smp.c:489:2: error: array subscript is above array bounds [-Werror=array-bounds] trace_ipi_raise(target, ipi_types[ipinr]); This is a correct warning as we actually overflow the array here. This patch raise_nmi() to call __smp_cross_call() instead of smp_cross_call(), to avoid calling into ftrace. For clarification, I'm also adding a two new code comments describing how this one is special. The warning appears to have shown up after commit e7273ff49acf ("ARM: 8488/1: Make IPI_CPU_BACKTRACE a "non-secure" SGI"), which changed the number assignment from '15' to '8', but as far as I can tell has existed since the IPI tracepoints were first introduced. If we decide to backport this patch to stable kernels, we probably need to backport e7273ff49acf as well. [yamada.masahiro@socionext.com: rebase on v5.1-rc1] Link: http://lkml.kernel.org/r/20190423034959.13525-2-yamada.masahiro@socionext.com Fixes: e7273ff49acf ("ARM: 8488/1: Make IPI_CPU_BACKTRACE a "non-secure" SGI") Fixes: 365ec7b17327 ("ARM: add IPI tracepoints") # v3.17 Signed-off-by: Arnd Bergmann Signed-off-by: Masahiro Yamada Cc: Heiko Carstens Cc: Arnd Bergmann Cc: Ingo Molnar Cc: Christophe Leroy Cc: Mathieu Malaterre Cc: "H. Peter Anvin" Cc: Thomas Gleixner Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Ralf Baechle Cc: Stefan Agner Cc: Boris Brezillon Cc: Miquel Raynal Cc: Richard Weinberger Cc: David Woodhouse Cc: Brian Norris Cc: Marek Vasut Cc: Russell King Cc: Borislav Petkov Cc: Mark Rutland Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

ARM: 8839/1: kprobe: make patch_lock a raw_spinlock_t

2019-04-20T07:07:53Z

[ Upstream commit 143c2a89e0e5fda6c6fd08d7bc1126438c19ae90 ] When running kprobe on -rt kernel, the below bug is caught: |BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:931 |in_atomic(): 1, irqs_disabled(): 128, pid: 14, name: migration/0 |Preemption disabled at:[<802f2b98>] cpu_stopper_thread+0xc0/0x140 |CPU: 0 PID: 14 Comm: migration/0 Tainted: G O 4.8.3-rt2 #1 |Hardware name: Freescale LS1021A |[<8025a43c>] (___might_sleep) |[<80b5b324>] (rt_spin_lock) |[<80b5c31c>] (__patch_text_real) |[<80b5c3ac>] (patch_text_stop_machine) |[<802f2920>] (multi_cpu_stop) Since patch_text_stop_machine() is called in stop_machine() which disables IRQ, sleepable lock should be not used in this atomic context, so replace patch_lock to raw lock. Signed-off-by: Yang Shi Signed-off-by: Sebastian Andrzej Siewior Reviewed-by: Arnd Bergmann Signed-off-by: Russell King Signed-off-by: Sasha Levin

ARM: avoid Cortex-A9 livelock on tight dmb loops

2019-04-05T20:29:13Z

[ Upstream commit 5388a5b82199facacd3d7ac0d05aca6e8f902fed ] machine_crash_nonpanic_core() does this: while (1) cpu_relax(); because the kernel has crashed, and we have no known safe way to deal with the CPU. So, we place the CPU into an infinite loop which we expect it to never exit - at least not until the system as a whole is reset by some method. In the absence of erratum 754327, this code assembles to: b . In other words, an infinite loop. When erratum 754327 is enabled, this becomes: 1: dmb b 1b It has been observed that on some systems (eg, OMAP4) where, if a crash is triggered, the system tries to kexec into the panic kernel, but fails after taking the secondary CPU down - placing it into one of these loops. This causes the system to livelock, and the most noticable effect is the system stops after issuing: Loading crashdump kernel... to the system console. The tested as working solution I came up with was to add wfe() to these infinite loops thusly: while (1) { cpu_relax(); wfe(); } which, without 754327 builds to: 1: wfe b 1b or with 754327 is enabled: 1: dmb wfe b 1b Adding "wfe" does two things depending on the environment we're running under: - where we're running on bare metal, and the processor implements "wfe", it stops us spinning endlessly in a loop where we're never going to do any useful work. - if we're running in a VM, it allows the CPU to be given back to the hypervisor and rescheduled for other purposes (maybe a different VM) rather than wasting CPU cycles inside a crashed VM. However, in light of erratum 794072, Will Deacon wanted to see 10 nops as well - which is reasonable to cover the case where we have erratum 754327 enabled _and_ we have a processor that doesn't implement the wfe hint. So, we now end up with: 1: wfe b 1b when erratum 754327 is disabled, or: 1: dmb nop nop nop nop nop nop nop nop nop nop wfe b 1b when erratum 754327 is enabled. We also get the dmb + 10 nop sequence elsewhere in the kernel, in terminating loops. This is reasonable - it means we get the workaround for erratum 794072 when erratum 754327 is enabled, but still relinquish the dead processor - either by placing it in a lower power mode when wfe is implemented as such or by returning it to the hypervisior, or in the case where wfe is a no-op, we use the workaround specified in erratum 794072 to avoid the problem. These as two entirely orthogonal problems - the 10 nops addresses erratum 794072, and the wfe is an optimisation that makes the system more efficient when crashed either in terms of power consumption or by allowing the host/other VMs to make use of the CPU. I don't see any reason not to use kexec() inside a VM - it has the potential to provide automated recovery from a failure of the VMs kernel with the opportunity for saving a crashdump of the failure. A panic() with a reboot timeout won't do that, and reading the libvirt documentation, setting on_reboot to "preserve" won't either (the documentation states "The preserve action for an on_reboot event is treated as a destroy".) Surely it has to be a good thing to avoiding having CPUs spinning inside a VM that is doing no useful work. Acked-by: Will Deacon Signed-off-by: Russell King Signed-off-by: Sasha Levin

ARM: 8840/1: use a raw_spinlock_t in unwind

2019-04-05T20:29:08Z

[ Upstream commit 74ffe79ae538283bbf7c155e62339f1e5c87b55a ] Mostly unwind is done with irqs enabled however SLUB may call it with irqs disabled while creating a new SLUB cache. I had system freeze while loading a module which called kmem_cache_create() on init. That means SLUB's __slab_alloc() disabled interrupts and then ->new_slab_objects() ->new_slab() ->setup_object() ->setup_object_debug() ->init_tracking() ->set_track() ->save_stack_trace() ->save_stack_trace_tsk() ->walk_stackframe() ->unwind_frame() ->unwind_find_idx() =>spin_lock_irqsave(&unwind_lock); Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Russell King Signed-off-by: Sasha Levin

ARM: 8824/1: fix a migrating irq bug when hotplug cpu

2019-03-23T12:19:42Z

[ Upstream commit 1b5ba350784242eb1f899bcffd95d2c7cff61e84 ] Arm TC2 fails cpu hotplug stress test. This issue was tracked down to a missing copy of the new affinity cpumask for the vexpress-spc interrupt into struct irq_common_data.affinity when the interrupt is migrated in migrate_one_irq(). Fix it by replacing the arm specific hotplug cpu migration with the generic irq code. This is the counterpart implementation to commit 217d453d473c ("arm64: fix a migrating irq bug when hotplug cpu"). Tested with cpu hotplug stress test on Arm TC2 (multi_v7_defconfig plus CONFIG_ARM_BIG_LITTLE_CPUFREQ=y and CONFIG_ARM_VEXPRESS_SPC_CPUFREQ=y). The vexpress-spc interrupt (irq=22) on this board is affine to CPU0. Its affinity cpumask now changes correctly e.g. from 0 to 1-4 when CPU0 is hotplugged out. Suggested-by: Marc Zyngier Signed-off-by: Dietmar Eggemann Acked-by: Marc Zyngier Reviewed-by: Linus Walleij Signed-off-by: Russell King Signed-off-by: Sasha Levin

ARM: 8781/1: Fix Thumb-2 syscall return for binutils 2.29+

2019-03-13T21:05:01Z

[ Upstream commit afc9f65e01cd114cb2cedf544d22239116ce0cc6 ] When building the kernel as Thumb-2 with binutils 2.29 or newer, if the assembler has seen the .type directive (via ENDPROC()) for a symbol, it automatically handles the setting of the lowest bit when the symbol is used with ADR. The badr macro on the other hand handles this lowest bit manually. This leads to a jump to a wrong address in the wrong state in the syscall return path: Internal error: Oops - undefined instruction: 0 [#2] SMP THUMB2 Modules linked in: CPU: 0 PID: 652 Comm: modprobe Tainted: G D 4.18.0-rc3+ #8 PC is at ret_fast_syscall+0x4/0x62 LR is at sys_brk+0x109/0x128 pc : [<80101004>] lr : [<801c8a35>] psr: 60000013 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 50c5387d Table: 9e82006a DAC: 00000051 Process modprobe (pid: 652, stack limit = 0x(ptrval)) 80101000 : 80101000: b672 cpsid i 80101002: f8d9 2008 ldr.w r2, [r9, #8] 80101006: f1b2 4ffe cmp.w r2, #2130706432 ; 0x7f000000 80101184 : 80101184: f8d9 a000 ldr.w sl, [r9] 80101188: e92d 0030 stmdb sp!, {r4, r5} 8010118c: f01a 0ff0 tst.w sl, #240 ; 0xf0 80101190: d117 bne.n 801011c2 <__sys_trace> 80101192: 46ba mov sl, r7 80101194: f5ba 7fc8 cmp.w sl, #400 ; 0x190 80101198: bf28 it cs 8010119a: f04f 0a00 movcs.w sl, #0 8010119e: f3af 8014 nop.w {20} 801011a2: f2af 1ea2 subw lr, pc, #418 ; 0x1a2 To fix this, add a new symbol name which doesn't have ENDPROC used on it and use that with badr. We can't remove the badr usage since that would would cause breakage with older binutils. Signed-off-by: Vincent Whitchurch Signed-off-by: Russell King Signed-off-by: Sasha Levin