user/sven/linux.git/arch/arm, branch v4.4.183

ARM: exynos: Fix undefined instruction during Exynos5422 resume

2019-06-22T06:18:22Z

[ Upstream commit 4d8e3e951a856777720272ce27f2c738a3eeef8c ] During early system resume on Exynos5422 with performance counters enabled the following kernel oops happens: Internal error: Oops - undefined instruction: 0 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 1433 Comm: bash Tainted: G W 5.0.0-rc5-next-20190208-00023-gd5fb5a8a13e6-dirty #5480 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) ... Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 4451006a DAC: 00000051 Process bash (pid: 1433, stack limit = 0xb7e0e22f) ... (reset_ctrl_regs) from [] (dbg_cpu_pm_notify+0x1c/0x24) (dbg_cpu_pm_notify) from [] (notifier_call_chain+0x44/0x84) (notifier_call_chain) from [] (__atomic_notifier_call_chain+0x7c/0x128) (__atomic_notifier_call_chain) from [] (cpu_pm_notify+0x30/0x54) (cpu_pm_notify) from [] (syscore_resume+0x98/0x3f4) (syscore_resume) from [] (suspend_devices_and_enter+0x97c/0xe74) (suspend_devices_and_enter) from [] (pm_suspend+0x770/0xc04) (pm_suspend) from [] (state_store+0x6c/0xcc) (state_store) from [] (kobj_attr_store+0x14/0x20) (kobj_attr_store) from [] (sysfs_kf_write+0x4c/0x50) (sysfs_kf_write) from [] (kernfs_fop_write+0xfc/0x1e0) (kernfs_fop_write) from [] (__vfs_write+0x2c/0x160) (__vfs_write) from [] (vfs_write+0xa4/0x16c) (vfs_write) from [] (ksys_write+0x40/0x8c) (ksys_write) from [] (ret_fast_syscall+0x0/0x28) Undefined instruction is triggered during CP14 reset, because bits: #16 (Secure privileged invasive debug disabled) and #17 (Secure privileged noninvasive debug disable) are set in DSCR. Those bits depend on SPNIDEN and SPIDEN lines, which are provided by Secure JTAG hardware block. That block in turn is powered from cluster 0 (big/Eagle), but the Exynos5422 boots on cluster 1 (LITTLE/KFC). To fix this issue it is enough to turn on the power on the cluster 0 for a while. This lets the Secure JTAG block to propagate the needed signals to LITTLE/KFC cores and change their DSCR. Signed-off-by: Marek Szyprowski Signed-off-by: Krzysztof Kozlowski Signed-off-by: Sasha Levin

ARM: dts: exynos: Always enable necessary APIO_1V8 and ABB_1V8 regulators on Arndale Octa

2019-06-22T06:18:21Z

[ Upstream commit 5ab99cf7d5e96e3b727c30e7a8524c976bd3723d ] The PVDD_APIO_1V8 (LDO2) and PVDD_ABB_1V8 (LDO8) regulators were turned off by Linux kernel as unused. However they supply critical parts of SoC so they should be always on: 1. PVDD_APIO_1V8 supplies SYS pins (gpx[0-3], PSHOLD), HDMI level shift, RTC, VDD1_12 (DRAM internal 1.8 V logic), pull-up for PMIC interrupt lines, TTL/UARTR level shift, reset pins and SW-TACT1 button. It also supplies unused blocks like VDDQ_SRAM (for SROM controller) and VDDQ_GPIO (gpm7, gpy7). The LDO2 cannot be turned off (S2MPS11 keeps it on anyway) so marking it "always-on" only reflects its real status. 2. PVDD_ABB_1V8 supplies Adaptive Body Bias Generator for ARM cores, memory and Mali (G3D). Signed-off-by: Krzysztof Kozlowski Signed-off-by: Sasha Levin

ARM: dts: imx6qdl: Specify IMX6QDL_CLK_IPG as "ipg" clock to SDMA

2019-06-22T06:18:21Z

[ Upstream commit b14c872eebc501b9640b04f4a152df51d6eaf2fc ] Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb" clock to determine if it needs to configure the IP block as operating at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both clocks as IMX6QDL_CLK_SDMA results in driver incorrectly thinking that ratio is 1:1 which results in broken SDMA funtionality(this at least breaks RAVE SP serdev driver on RDU2). Fix the code to specify IMX6QDL_CLK_IPG as "ipg" clock for SDMA, to avoid detecting incorrect clock ratio. Signed-off-by: Andrey Smirnov Reviewed-by: Lucas Stach Cc: Angus Ainslie (Purism) Cc: Chris Healy Cc: Lucas Stach Cc: Fabio Estevam Cc: Shawn Guo Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Tested-by: Adam Ford Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin

ARM: dts: imx6sx: Specify IMX6SX_CLK_IPG as "ipg" clock to SDMA

2019-06-22T06:18:20Z

[ Upstream commit 8979117765c19edc3b01cc0ef853537bf93eea4b ] Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb" clock to determine if it needs to configure the IP block as operating at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both clocks as IMX6SX_CLK_SDMA results in driver incorrectly thinking that ratio is 1:1 which results in broken SDMA funtionality. Fix the code to specify IMX6SX_CLK_IPG as "ipg" clock for SDMA, to avoid detecting incorrect clock ratio. Signed-off-by: Andrey Smirnov Cc: Angus Ainslie (Purism) Cc: Chris Healy Cc: Lucas Stach Cc: Fabio Estevam Cc: Shawn Guo Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin

ARM: dts: imx6sx: Specify IMX6SX_CLK_IPG as "ahb" clock to SDMA

2019-06-22T06:18:20Z

[ Upstream commit cc839d0f8c284fcb7591780b568f13415bbb737c ] Since 25aaa75df1e6 SDMA driver uses clock rates of "ipg" and "ahb" clock to determine if it needs to configure the IP block as operating at 1:1 or 1:2 clock ratio (ACR bit in SDMAARM_CONFIG). Specifying both clocks as IMX6SL_CLK_SDMA results in driver incorrectly thinking that ratio is 1:1 which results in broken SDMA funtionality. Fix the code to specify IMX6SL_CLK_AHB as "ahb" clock for SDMA, to avoid detecting incorrect clock ratio. Signed-off-by: Andrey Smirnov Cc: Angus Ainslie (Purism) Cc: Chris Healy Cc: Lucas Stach Cc: Fabio Estevam Cc: Shawn Guo Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin

KVM: arm/arm64: Ensure vcpu target is unset on reset failure

2019-06-11T10:23:49Z

[ Upstream commit 811328fc3222f7b55846de0cd0404339e2e1e6d7 ] A failed KVM_ARM_VCPU_INIT should not set the vcpu target, as the vcpu target is used by kvm_vcpu_initialized() to determine if other vcpu ioctls may proceed. We need to set the target before calling kvm_reset_vcpu(), but if that call fails, we should then unset it and clear the feature bitmap while we're at it. Signed-off-by: Andrew Jones [maz: Simplified patch, completed commit message] Signed-off-by: Marc Zyngier Signed-off-by: Sasha Levin

crypto: arm/aes-neonbs - don't access already-freed walk.iv

2019-06-11T10:23:41Z

commit 767f015ea0b7ab9d60432ff6cd06b664fd71f50f upstream. If the user-provided IV needs to be aligned to the algorithm's alignmask, then skcipher_walk_virt() copies the IV into a new aligned buffer walk.iv. But skcipher_walk_virt() can fail afterwards, and then if the caller unconditionally accesses walk.iv, it's a use-after-free. arm32 xts-aes-neonbs doesn't set an alignmask, so currently it isn't affected by this despite unconditionally accessing walk.iv. However this is more subtle than desired, and it was actually broken prior to the alignmask being removed by commit cc477bf64573 ("crypto: arm/aes - replace bit-sliced OpenSSL NEON code"). Thus, update xts-aes-neonbs to start checking the return value of skcipher_walk_virt(). Fixes: e4e7f10bfc40 ("ARM: add support for bit sliced AES using NEON instructions") Cc: # v3.13+ Signed-off-by: Eric Biggers Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman

ARM: exynos: Fix a leaked reference by adding missing of_node_put

2019-06-11T10:23:35Z

commit 629266bf7229cd6a550075f5961f95607b823b59 upstream. The call to of_get_next_child returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with warnings like: arch/arm/mach-exynos/firmware.c:201:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 193, but without a corresponding object release within this function. Cc: stable@vger.kernel.org Signed-off-by: Wen Yang Signed-off-by: Krzysztof Kozlowski Signed-off-by: Greg Kroah-Hartman

ARM: iop: don't use using 64-bit DMA masks

2019-05-16T17:45:02Z

[ Upstream commit 2125801ccce19249708ca3245d48998e70569ab8 ] clang warns about statically defined DMA masks from the DMA_BIT_MASK macro with length 64: arch/arm/mach-iop13xx/setup.c:303:35: error: shift count >= width of type [-Werror,-Wshift-count-overflow] static u64 iop13xx_adma_dmamask = DMA_BIT_MASK(64); ^~~~~~~~~~~~~~~~ include/linux/dma-mapping.h:141:54: note: expanded from macro 'DMA_BIT_MASK' #define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1)) ^ ~~~ The ones in iop shouldn't really be 64 bit masks, so changing them to what the driver can support avoids the warning. Signed-off-by: Arnd Bergmann Signed-off-by: Olof Johansson Signed-off-by: Sasha Levin

ARM: orion: don't use using 64-bit DMA masks

2019-05-16T17:45:02Z

[ Upstream commit cd92d74d67c811dc22544430b9ac3029f5bd64c5 ] clang warns about statically defined DMA masks from the DMA_BIT_MASK macro with length 64: arch/arm/plat-orion/common.c:625:29: error: shift count >= width of type [-Werror,-Wshift-count-overflow] .coherent_dma_mask = DMA_BIT_MASK(64), ^~~~~~~~~~~~~~~~ include/linux/dma-mapping.h:141:54: note: expanded from macro 'DMA_BIT_MASK' #define DMA_BIT_MASK(n) (((n) == 64) ? ~0ULL : ((1ULL<<(n))-1)) The ones in orion shouldn't really be 64 bit masks, so changing them to what the driver can support avoids the warning. Signed-off-by: Arnd Bergmann Signed-off-by: Olof Johansson Signed-off-by: Sasha Levin