user/sven/linux.git/arch/m68k/atari, branch v5.2.2

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46Z

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

m68k: atari: Convert to clocksource API

2019-03-25T09:22:24Z

Add a platform clocksource by adapting the existing arch_gettimeoffset implementation. Normally the MFP timer C interrupt flag would be used to check for timer counter wrap-around. Unfortunately, that flag gets cleared by the MFP itself (due to automatic End-of-Interrupt mode). This means that mfp_timer_c_handler() and atari_read_clk() must race when accounting for counter wrap-around. That problem is avoided by effectively stopping the clock when it might otherwise jump backwards (due to interrupt latency). Note that this may affect clock accuracy. After the timer interrupt is asserted, wait for the counter to be reloaded so that atari_read_clk() will not see the intermediate state as that would cause the clock to jump backwards. Signed-off-by: Finn Thain Acked-by: Linus Walleij Tested-by: Michael Schmitz Signed-off-by: Geert Uytterhoeven

m68k: Drop ARCH_USES_GETTIMEOFFSET

2019-03-25T09:22:24Z

The functions that implement arch_gettimeoffset are re-used by new clocksource drivers in subsequent patches. Signed-off-by: Finn Thain Acked-by: Linus Walleij Signed-off-by: Geert Uytterhoeven

m68k: Call timer_interrupt() with interrupts disabled

2019-03-25T09:22:24Z

Some platforms execute their timer handler with the interrupt priority level set below 6. That means the handler could be interrupted by another driver and this could lead to re-entry of the timer core. Avoid this by use of local_irq_save/restore for timer interrupt dispatch. This provides mutual exclusion around the timer interrupt flag access which is needed later in this series for the clocksource conversion. Reported-by: Thomas Gleixner Link: http://lkml.kernel.org/r/alpine.DEB.2.21.1811131407120.2697@nanos.tec.linutronix.de Signed-off-by: Finn Thain Signed-off-by: Geert Uytterhoeven

treewide: add checks for the return value of memblock_alloc*()

2019-03-12T17:04:02Z

Add check for the return value of memblock_alloc*() functions and call panic() in case of error. The panic message repeats the one used by panicing memblock allocators with adjustment of parameters to include only relevant ones. The replacement was mostly automated with semantic patches like the one below with manual massaging of format strings. @@ expression ptr, size, align; @@ ptr = memblock_alloc(size, align); + if (!ptr) + panic("%s: Failed to allocate %lu bytes align=0x%lx\n", __func__, size, align); [anders.roxell@linaro.org: use '%pa' with 'phys_addr_t' type] Link: http://lkml.kernel.org/r/20190131161046.21886-1-anders.roxell@linaro.org [rppt@linux.ibm.com: fix format strings for panics after memblock_alloc] Link: http://lkml.kernel.org/r/1548950940-15145-1-git-send-email-rppt@linux.ibm.com [rppt@linux.ibm.com: don't panic if the allocation in sparse_buffer_init fails] Link: http://lkml.kernel.org/r/20190131074018.GD28876@rapoport-lnx [akpm@linux-foundation.org: fix xtensa printk warning] Link: http://lkml.kernel.org/r/1548057848-15136-20-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport Signed-off-by: Anders Roxell Reviewed-by: Guo Ren [c-sky] Acked-by: Paul Burton [MIPS] Acked-by: Heiko Carstens [s390] Reviewed-by: Juergen Gross [Xen] Reviewed-by: Geert Uytterhoeven [m68k] Acked-by: Max Filippov [xtensa] Cc: Catalin Marinas Cc: Christophe Leroy Cc: Christoph Hellwig Cc: "David S. Miller" Cc: Dennis Zhou Cc: Greentime Hu Cc: Greg Kroah-Hartman Cc: Guan Xuetao Cc: Guo Ren Cc: Mark Salter Cc: Matt Turner Cc: Michael Ellerman Cc: Michal Simek Cc: Petr Mladek Cc: Richard Weinberger Cc: Rich Felker Cc: Rob Herring Cc: Rob Herring Cc: Russell King Cc: Stafford Horne Cc: Tony Luck Cc: Vineet Gupta Cc: Yoshinori Sato Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge tag 'char-misc-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2019-03-06T22:18:59Z

Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver patch pull request for 5.1-rc1. The largest thing by far is the new habanalabs driver for their AI accelerator chip. For now it is in the drivers/misc directory but will probably move to a new directory soon along with other drivers of this type. Other than that, just the usual set of individual driver updates and fixes. There's an "odd" merge in here from the DRM tree that they asked me to do as the MEI driver is starting to interact with the i915 driver, and it needed some coordination. All of those patches have been properly acked by the relevant subsystem maintainers. All of these have been in linux-next with no reported issues, most for quite some time" * tag 'char-misc-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (219 commits) habanalabs: adjust Kconfig to fix build errors habanalabs: use %px instead of %p in error print habanalabs: use do_div for 64-bit divisions intel_th: gth: Fix an off-by-one in output unassigning habanalabs: fix little-endian<->cpu conversion warnings habanalabs: use NULL to initialize array of pointers habanalabs: fix little-endian<->cpu conversion warnings habanalabs: soft-reset device if context-switch fails habanalabs: print pointer using %p habanalabs: fix memory leak with CBs with unaligned size habanalabs: return correct error code on MMU mapping failure habanalabs: add comments in uapi/misc/habanalabs.h habanalabs: extend QMAN0 job timeout habanalabs: set DMA0 completion to SOB 1007 habanalabs: fix validation of WREG32 to DMA completion habanalabs: fix mmu cache registers init habanalabs: disable CPU access on timeouts habanalabs: add MMU DRAM default page mapping habanalabs: Dissociate RAZWI info from event types misc/habanalabs: adjust Kconfig to fix build errors ...

m68k: Dispatch nvram_ops calls to Atari or Mac functions

2019-01-22T09:21:45Z

A multi-platform kernel binary has to decide at run-time how to dispatch the arch_nvram_ops calls. Add a platform-independent arch_nvram_ops struct for this, to replace the atari-specific one. Enable CONFIG_HAVE_ARCH_NVRAM_OPS for Macs. Acked-by: Geert Uytterhoeven Tested-by: Stan Johnson Signed-off-by: Finn Thain Signed-off-by: Greg Kroah-Hartman

m68k/atari: Implement arch_nvram_ops methods and enable CONFIG_HAVE_ARCH_NVRAM_OPS

2019-01-22T09:21:44Z

Atari RTC NVRAM uses a checksum so implement the remaining arch_nvram_ops methods for the set_checksum and initialize ioctls. Enable CONFIG_HAVE_ARCH_NVRAM_OPS. Acked-by: Geert Uytterhoeven Signed-off-by: Finn Thain Signed-off-by: Greg Kroah-Hartman

m68k/atari: Implement arch_nvram_ops struct

2019-01-22T09:21:43Z

By implementing an arch_nvram_ops struct, a platform can re-use the drivers/char/nvram.c module without needing any arch-specific code in that module. Atari does so here. Acked-by: Geert Uytterhoeven Signed-off-by: Finn Thain Signed-off-by: Greg Kroah-Hartman

nvram: Replace nvram_* function exports with static functions

2019-01-22T09:21:43Z

Replace nvram_* functions with static functions in nvram.h. These will become wrappers for struct nvram_ops method calls. This patch effectively disables existing NVRAM functionality so as to allow the rest of the series to be bisected without build failures. That functionality is gradually re-implemented in subsequent patches. Replace the sole validate-checksum-and-read-byte sequence with a call to nvram_read() which will gain the same semantics in subsequent patches. Remove unused exports. Acked-by: Geert Uytterhoeven Signed-off-by: Finn Thain Signed-off-by: Greg Kroah-Hartman