user/sven/linux.git/arch/m68k/kernel/vmlinux-std.lds, branch v5.2.2

m68k: add missing SOFTIRQENTRY_TEXT linker section

2017-12-04T00:15:18Z

Commit be7635e7287e ("arch, ftrace: for KASAN put hard/soft IRQ entries into separate sections") added a new linker section, SOFTIRQENTRY_TEXT, to the linker scripts for most architectures. It didn't add it to any of the linker scripts for the m68k architecture. This was not really a problem because it is only defined if either of CONFIG_FUNCTION_GRAPH_TRACER or CONFIG_KASAN are enabled - which can never be true for m68k. However commit 229a71860547 ("irq: Make the irqentry text section unconditional") means that SOFTIRQENTRY_TEXT is now always defined. So on m68k we now end up with a separate ELF section for .softirqentry.text instead of it being part of the .text section. On some m68k targets in some configurations this can also cause a fatal link error: LD vmlinux /usr/local/bin/../m68k-uclinux/bin/ld.real: section .softirqentry.text loaded at [0000000010de10c0,0000000010de12dd] overlaps section .rodata loaded at [0000000010de10c0,0000000010e0fd67] To fix add in the missing SOFTIRQENTRY_TEXT section into the m68k linker scripts. I noticed that m68k is also missing the IRQENTRY_TEXT section, so this patch also adds an entry for that too. Signed-off-by: Greg Ungerer

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

nmi_backtrace: generate one-line reports for idle cpus

2016-10-08T01:46:30Z

When doing an nmi backtrace of many cores, most of which are idle, the output is a little overwhelming and very uninformative. Suppress messages for cpus that are idling when they are interrupted and just emit one line, "NMI backtrace for N skipped: idling at pc 0xNNN". We do this by grouping all the cpuidle code together into a new .cpuidle.text section, and then checking the address of the interrupted PC to see if it lies within that section. This commit suitably tags x86 and tile idle routines, and only adds in the minimal framework for other architectures. Link: http://lkml.kernel.org/r/1472487169-14923-5-git-send-email-cmetcalf@mellanox.com Signed-off-by: Chris Metcalf Acked-by: Peter Zijlstra (Intel) Tested-by: Peter Zijlstra (Intel) Tested-by: Daniel Thompson [arm] Tested-by: Petr Mladek Cc: Aaron Tomlin Cc: Peter Zijlstra (Intel) Cc: "Rafael J. Wysocki" Cc: Russell King Cc: Thomas Gleixner Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

m68k: Replace m68k-specific _[se]bss by generic __bss_{start,stop}

2012-06-27T07:59:43Z

BSS_SECTION() provides the __bss_{start,stop} symbols, so there's no need to wrap our own _[se]bss around it. Signed-off-by: Geert Uytterhoeven Acked-by: Greg Ungerer

m68k: print memory layout info in boot log

2011-12-24T11:47:57Z

Output a table of the kernel memory regions at boot time. This is taken directly from the ARM architecture code that does this. The table looks like this: Virtual kernel memory layout: vector : 0x00000000 - 0x00000400 ( 0 KiB) kmap : 0xd0000000 - 0xe0000000 ( 256 MiB) vmalloc : 0xc0000000 - 0xcfffffff ( 255 MiB) lowmem : 0x00000000 - 0x02000000 ( 32 MiB) .init : 0x00128000 - 0x00134000 ( 48 KiB) .text : 0x00020000 - 0x00118d54 ( 996 KiB) .data : 0x00118d60 - 0x00126000 ( 53 KiB) .bss : 0x00134000 - 0x001413e0 ( 53 KiB) This has been very useful while debugging the ColdFire virtual memory support code. But in general I think it is nice to know extacly where the kernel has layed everything out on boot. Signed-off-by: Greg Ungerer

extable, core_kernel_data(): Make sure all archs define _sdata

2011-05-20T06:56:56Z

A new utility function (core_kernel_data()) is used to determine if a passed in address is part of core kernel data or not. It may or may not return true for RO data, but this utility must work for RW data. Thus both _sdata and _edata must be defined and continuous, without .init sections that may later be freed and replaced by volatile memory (memory that can be freed). This utility function is used to determine if data is safe from ever being freed. Thus it should return true for all RW global data that is not in a module or has been allocated, or false otherwise. Also change core_kernel_data() back to the more precise _sdata condition and document the function. Signed-off-by: Steven Rostedt Acked-by: Ralf Baechle Acked-by: Hirokazu Takata Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: Matt Turner Cc: Geert Uytterhoeven Cc: Roman Zippel Cc: linux-m68k@lists.linux-m68k.org Cc: Kyle McMartin Cc: Helge Deller Cc: JamesE.J.Bottomley Link: http://lkml.kernel.org/r/1305855298.1465.19.camel@gandalf.stny.rr.com Signed-off-by: Ingo Molnar ---- arch/alpha/kernel/vmlinux.lds.S | 1 + arch/m32r/kernel/vmlinux.lds.S | 1 + arch/m68k/kernel/vmlinux-std.lds | 2 ++ arch/m68k/kernel/vmlinux-sun3.lds | 1 + arch/mips/kernel/vmlinux.lds.S | 1 + arch/parisc/kernel/vmlinux.lds.S | 3 +++ kernel/extable.c | 12 +++++++++++- 7 files changed, 20 insertions(+), 1 deletion(-)

m68k: Cleanup linker scripts using new linker script macros.

2009-12-06T10:18:25Z

Signed-off-by: Tim Abbott Tested-by: Andreas Schwab Cc: Roman Zippel Cc: Sam Ravnborg Signed-off-by: Geert Uytterhoeven

linker script: unify usage of discard definition

2009-07-09T02:27:40Z

Discarded sections in different archs share some commonality but have considerable differences. This led to linker script for each arch implementing its own /DISCARD/ definition, which makes maintaining tedious and adding new entries error-prone. This patch makes all linker scripts to move discard definitions to the end of the linker script and use the common DISCARDS macro. As ld uses the first matching section definition, archs can include default discarded sections by including them earlier in the linker script. ia64 is notable because it first throws away some ia64 specific subsections and then include the rest of the sections into the final image, so those sections must be discarded before the inclusion. defconfig compile tested for x86, x86-64, powerpc, powerpc64, ia64, alpha, sparc, sparc64 and s390. Michal Simek tested microblaze. Signed-off-by: Tejun Heo Acked-by: Paul Mundt Acked-by: Mike Frysinger Tested-by: Michal Simek Cc: linux-arch@vger.kernel.org Cc: Michal Simek Cc: microblaze-uclinux@itee.uq.edu.au Cc: Sam Ravnborg Cc: Tony Luck

linker script: throw away .discard section

2009-06-24T06:13:38Z

x86 throws away .discard section but no other archs do. Also, .discard is not thrown away while linking modules. Make every arch and module linking throw it away. This will be used to define dummy variables for percpu declarations and definitions. This patch is based on Ivan Kokshaysky's alpha percpu patch. [ Impact: always throw away everything in .discard ] Signed-off-by: Tejun Heo Cc: Ivan Kokshaysky Cc: Richard Henderson Cc: Russell King Cc: Haavard Skinnemoen Cc: Bryan Wu Cc: Mikael Starvik Cc: Jesper Nilsson Cc: David Howells Cc: Yoshinori Sato Cc: Tony Luck Cc: Hirokazu Takata Cc: Geert Uytterhoeven Cc: Michal Simek Cc: Ralf Baechle Cc: Kyle McMartin Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Martin Schwidefsky Cc: Heiko Carstens Cc: Paul Mundt Cc: David S. Miller Cc: Jeff Dike Cc: Chris Zankel Cc: Rusty Russell Cc: Ingo Molnar

m68k: convert to use __HEAD and HEAD_TEXT macros.

2009-04-26T16:20:38Z

This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: Tim Abbott Cc: Geert Uytterhoeven Cc: Roman Zippel Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds