user/sven/linux.git/arch/microblaze, branch v5.4.76

microblaze: Prevent the overflow of the start

2020-02-24T07:37:02Z

[ Upstream commit 061d2c1d593076424c910cb1b64ecdb5c9a6923f ] In case the start + cache size is more than the max int the start overflows. Prevent the same. Signed-off-by: Shubhrajyoti Datta Signed-off-by: Michal Simek Signed-off-by: Sasha Levin

Merge branch 'akpm' (patches from Andrew)

2019-09-24T23:10:23Z

Merge updates from Andrew Morton: - a few hot fixes - ocfs2 updates - almost all of -mm (slab-generic, slab, slub, kmemleak, kasan, cleanups, debug, pagecache, memcg, gup, pagemap, memory-hotplug, sparsemem, vmalloc, initialization, z3fold, compaction, mempolicy, oom-kill, hugetlb, migration, thp, mmap, madvise, shmem, zswap, zsmalloc) * emailed patches from Andrew Morton : (132 commits) mm/zsmalloc.c: fix a -Wunused-function warning zswap: do not map same object twice zswap: use movable memory if zpool support allocate movable memory zpool: add malloc_support_movable to zpool_driver shmem: fix obsolete comment in shmem_getpage_gfp() mm/madvise: reduce code duplication in error handling paths mm: mmap: increase sockets maximum memory size pgoff for 32bits mm/mmap.c: refine find_vma_prev() with rb_last() riscv: make mmap allocation top-down by default mips: use generic mmap top-down layout and brk randomization mips: replace arch specific way to determine 32bit task with generic version mips: adjust brk randomization offset to fit generic version mips: use STACK_TOP when computing mmap base address mips: properly account for stack randomization and stack guard gap arm: use generic mmap top-down layout and brk randomization arm: use STACK_TOP when computing mmap base address arm: properly account for stack randomization and stack guard gap arm64, mm: make randomization selected by generic topdown mmap layout arm64, mm: move generic mmap layout functions to mm arm64: consider stack randomization for mmap base only when necessary ...

mm: consolidate pgtable_cache_init() and pgd_cache_init()

2019-09-24T22:54:09Z

Both pgtable_cache_init() and pgd_cache_init() are used to initialize kmem cache for page table allocations on several architectures that do not use PAGE_SIZE tables for one or more levels of the page table hierarchy. Most architectures do not implement these functions and use __weak default NOP implementation of pgd_cache_init(). Since there is no such default for pgtable_cache_init(), its empty stub is duplicated among most architectures. Rename the definitions of pgd_cache_init() to pgtable_cache_init() and drop empty stubs of pgtable_cache_init(). Link: http://lkml.kernel.org/r/1566457046-22637-1-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport Acked-by: Will Deacon [arm64] Acked-by: Thomas Gleixner [x86] Cc: Catalin Marinas Cc: Ingo Molnar Cc: Borislav Petkov Cc: Matthew Wilcox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

microblaze: switch to generic version of pte allocation

2019-09-24T22:54:09Z

The microblaze implementation of pte_alloc_one() has a provision to allocated PTEs from high memory, but neither CONFIG_HIGHPTE nor pte_map*() versions for suitable for HIGHPTE are defined. Except that, microblaze version of pte_alloc_one() is identical to the generic one as well as the implementations of pte_free() and pte_free_kernel(). Switch microblaze to use the generic versions of these functions. Also remove pte_free_slow() that is not referenced anywhere in the code. Link: http://lkml.kernel.org/r/1565690952-32158-1-git-send-email-rppt@linux.ibm.com Signed-off-by: Mike Rapoport Acked-by: Mark Rutland Cc: Michal Simek Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mm: remove quicklist page table caches

2019-09-24T22:54:09Z

Patch series "mm: remove quicklist page table caches". A while ago Nicholas proposed to remove quicklist page table caches [1]. I've rebased his patch on the curren upstream and switched ia64 and sh to use generic versions of PTE allocation. [1] https://lore.kernel.org/linux-mm/20190711030339.20892-1-npiggin@gmail.com This patch (of 3): Remove page table allocator "quicklists". These have been around for a long time, but have not got much traction in the last decade and are only used on ia64 and sh architectures. The numbers in the initial commit look interesting but probably don't apply anymore. If anybody wants to resurrect this it's in the git history, but it's unhelpful to have this code and divergent allocator behaviour for minor archs. Also it might be better to instead make more general improvements to page allocator if this is still so slow. Link: http://lkml.kernel.org/r/1565250728-21721-2-git-send-email-rppt@linux.ibm.com Signed-off-by: Nicholas Piggin Signed-off-by: Mike Rapoport Cc: Tony Luck Cc: Yoshinori Sato Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge tag 'microblaze-v5.4-rc1' of git://git.monstr.eu/linux-2.6-microblaze

2019-09-24T19:49:47Z

Pull Microblaze updates from Michal Simek: - clean up reset gpio handler - defconfig updates - add support for 8 byte get_user() - switch to generic dma code * tag 'microblaze-v5.4-rc1' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Switch to standard restart handler microblaze: defconfig synchronization microblaze: Enable Xilinx AXI emac driver by default arch/microblaze: support get_user() of size 8 bytes microblaze: remove ioremap_fullcache microblaze: use the generic dma coherent remap allocator microblaze/nommu: use the generic uncached segment support

Merge tag 'pci-v5.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

2019-09-24T02:16:01Z

Pull PCI updates from Bjorn Helgaas: "Enumeration: - Consolidate _HPP/_HPX stuff in pci-acpi.c and simplify it (Krzysztof Wilczynski) - Fix incorrect PCIe device types and remove dev->has_secondary_link to simplify code that deals with upstream/downstream ports (Mika Westerberg) - After suspend, restore Resizable BAR size bits correctly for 1MB BARs (Sumit Saxena) - Enable PCI_MSI_IRQ_DOMAIN support for RISC-V (Wesley Terpstra) Virtualization: - Add ACS quirks for iProc PAXB (Abhinav Ratna), Amazon Annapurna Labs (Ali Saidi) - Move sysfs SR-IOV functions to iov.c (Kelsey Skunberg) - Remove group write permissions from sysfs sriov_numvfs, sriov_drivers_autoprobe (Kelsey Skunberg) Hotplug: - Simplify pciehp indicator control (Denis Efremov) Peer-to-peer DMA: - Allow P2P DMA between root ports for whitelisted bridges (Logan Gunthorpe) - Whitelist some Intel host bridges for P2P DMA (Logan Gunthorpe) - DMA map P2P DMA requests that traverse host bridge (Logan Gunthorpe) Amazon Annapurna Labs host bridge driver: - Add DT binding and controller driver (Jonathan Chocron) Hyper-V host bridge driver: - Fix hv_pci_dev->pci_slot use-after-free (Dexuan Cui) - Fix PCI domain number collisions (Haiyang Zhang) - Use instance ID bytes 4 & 5 as PCI domain numbers (Haiyang Zhang) - Fix build errors on non-SYSFS config (Randy Dunlap) i.MX6 host bridge driver: - Limit DBI register length (Stefan Agner) Intel VMD host bridge driver: - Fix config addressing issues (Jon Derrick) Layerscape host bridge driver: - Add bar_fixed_64bit property to endpoint driver (Xiaowei Bao) - Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC drivers separately (Xiaowei Bao) Mediatek host bridge driver: - Add MT7629 controller support (Jianjun Wang) Mobiveil host bridge driver: - Fix CPU base address setup (Hou Zhiqiang) - Make "num-lanes" property optional (Hou Zhiqiang) Tegra host bridge driver: - Fix OF node reference leak (Nishka Dasgupta) - Disable MSI for root ports to work around design problem (Vidya Sagar) - Add Tegra194 DT binding and controller support (Vidya Sagar) - Add support for sideband pins and slot regulators (Vidya Sagar) - Add PIPE2UPHY support (Vidya Sagar) Misc: - Remove unused pci_block_cfg_access() et al (Kelsey Skunberg) - Unexport pci_bus_get(), etc (Kelsey Skunberg) - Hide PM, VC, link speed, ATS, ECRC, PTM constants and interfaces in the PCI core (Kelsey Skunberg) - Clean up sysfs DEVICE_ATTR() usage (Kelsey Skunberg) - Mark expected switch fall-through (Gustavo A. R. Silva) - Propagate errors for optional regulators and PHYs (Thierry Reding) - Fix kernel command line resource_alignment parameter issues (Logan Gunthorpe)" * tag 'pci-v5.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (112 commits) PCI: Add pci_irq_vector() and other stubs when !CONFIG_PCI arm64: tegra: Add PCIe slot supply information in p2972-0000 platform arm64: tegra: Add configuration for PCIe C5 sideband signals PCI: tegra: Add support to enable slot regulators PCI: tegra: Add support to configure sideband pins PCI: vmd: Fix shadow offsets to reflect spec changes PCI: vmd: Fix config addressing when using bus offsets PCI: dwc: Add validation that PCIe core is set to correct mode PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driver dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root Port PCI: Add ACS quirk for Amazon Annapurna Labs root ports PCI: Add Amazon's Annapurna Labs vendor ID MAINTAINERS: Add PCI native host/endpoint controllers designated reviewer PCI: hv: Use bytes 4 and 5 from instance ID as the PCI domain numbers dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries dt-bindings: PCI: tegra: Add sideband pins configuration entries PCI: tegra: Add Tegra194 PCIe support PCI: Get rid of dev->has_secondary_link flag ...

microblaze: Switch to standard restart handler

2019-09-19T08:43:32Z

The microblaze uses the legacy APIs to dig out a GPIO pin defined in the root of the device tree to issue a hard reset of the platform. Asserting a hard reset should be done using the standard DT-enabled and fully GPIO descriptor aware driver in drivers/power/reset/gpio-restart.c using the bindings from Documentation/devicetree/bindings/power/reset/gpio-restart.txt To achieve this, first make sure microblaze makes use of the standard kernel restart path utilizing do_kernel_restart() from . Put in some grace time and an emergency print if the restart does not properly assert. As this is basic platform functionality we patch the DTS file and defconfig in one go for a lockstep change. Cc: Arnd Bergmann Cc: Michal Simek Signed-off-by: Linus Walleij [ Michal: Move machine_restart back to reset.c ] Signed-off-by: Michal Simek

microblaze: defconfig synchronization

2019-09-18T07:51:40Z

Kconfig structure has changed that's why make sense to do synchronization. Signed-off-by: Michal Simek

microblaze: Enable Xilinx AXI emac driver by default

2019-09-18T07:51:26Z

Enable Xilinx AXI emac ethernet driver for Microblaze. Signed-off-by: Michal Simek