user/sven/linux.git/arch/mips/dec, branch v4.4.4

MIPS: DEC: Do not set up the FPU interrupt if no FPU

2015-04-07T23:10:46Z

Following the arrangement for processors that wire FPU exceptions to the FPE CPU exception handle the case where no FPU is in use -- which for DECstation systems will only ever happen when the "nofpu" kernel option has been used -- do not register the FPU interrupt in such a case either. Signed-off-by: Maciej W. Rozycki Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9714/ Signed-off-by: Ralf Baechle

MIPS: DEC: Implement FPU interrupt counter

2015-04-07T23:10:45Z

Implement a cheap way to count FPU interrupts for R2k/R3k DECstation systems. Do this manually in handcoded assembly, rather than calling `kstat_incr_irq_this_cpu' that would require setting up a stack frame and a lot of redirection. This is not going to be a problem because the FPU interrupt is local to the CPU and also there is one CPU only anyway. So at bootstrap determine the address of the correct location within `struct irq_desc', and then only refer to it directly in the interrupt handler. Signed-off-by: Maciej W. Rozycki Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9713/ Signed-off-by: Ralf Baechle

Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

2014-06-10T01:10:34Z

Pull MIPS updates from Ralf Baechle: - three fixes for 3.15 that didn't make it in time - limited Octeon 3 support. - paravirtualization support - improvment to platform support for Netlogix SOCs. - add support for powering down the Malta eval board in software - add many instructions to the in-kernel microassembler. - add support for the BPF JIT. - minor cleanups of the BCM47xx code. - large cleanup of math emu code resulting in significant code size reduction, better readability of the code and more accurate emulation. - improvments to the MIPS CPS code. - support C3 power status for the R4k count/compare clock device. - improvments to the GIO support for older SGI workstations. - increase number of supported CPUs to 256; this can be reached on certain embedded multithreaded ccNUMA configurations. - various small cleanups, updates and fixes * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (173 commits) MIPS: IP22/IP28: Improve GIO support MIPS: Octeon: Add twsi interrupt initialization for OCTEON 3XXX, 5XXX, 63XX DEC: Document the R4k MB ASIC mini interrupt controller DEC: Add self as the maintainer MIPS: Add microMIPS MSA support. MIPS: Replace calls to obsolete strict_strto call with kstrto* equivalents. MIPS: Replace obsolete strict_strto call with kstrto MIPS: BFP: Simplify code slightly. MIPS: Call find_vma with the mmap_sem held MIPS: Fix 'write_msa_##' inline macro. MIPS: Fix MSA toolchain support detection. mips: Update the email address of Geert Uytterhoeven MIPS: Add minimal defconfig for mips_paravirt MIPS: Enable build for new system 'paravirt' MIPS: paravirt: Add pci controller for virtio MIPS: Add code for new system 'paravirt' MIPS: Add functions for hypervisor call MIPS: OCTEON: Add OCTEON3 to __get_cpu_type MIPS: Add function get_ebase_cpunum MIPS: Add minimal support for OCTEON3 to c-r4k.c ...

arch/mips/dec: switch DECstation systems to rtc-cmos

2014-06-06T23:08:07Z

This adds an RTC platform device for DECstation systems so that they can use the rtc-cmos driver for their RTC device. Signed-off-by: Maciej W. Rozycki Cc: Alessandro Zummo Cc: Ralf Baechle Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

MIPS: DEC: Remove the Halt button interrupt on R4k systems

2014-05-30T19:01:08Z

On R4k DECstations the Halt button is wired to the NMI processor input rather than an ordinary interrupt input such as on R3k DECstations. This is possible with a different design of the CPU daughtercard that routes the Halt button line from the baseboard connector. Additionally the interrupt input has been reused for a different purpose on the KN04 and KN05 R4k CPU daughtercards so it is better kept masked. Signed-off-by: Maciej W. Rozycki Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6705/ Signed-off-by: Ralf Baechle

MIPS: DEC/SNI: O32 wrapper stack switching fixes

2014-05-12T22:29:35Z

Commit 231a35d37293ab88d325a9cb94e5474c156282c0 [[MIPS] RM: Collected changes] broke DECstation support by introducing an incompatible copy of arch/mips/dec/prom/call_o32.S in arch/mips/fw/lib/, built unconditionally. The copy happens to land earlier of the two among the modules used in the link and is therefore chosen for the DECstation rather than the intended original. As a result random kernel data is corrupted because a pointer to the "%s" formatted output template is used as a temporary stack pointer rather than being passed down to prom_printf. This also explains why prom_printf still works, up to a point -- the next argument is the actual string to output so it works just fine as the output template until enough kernel data has been corrupted to cause a crash. This change adjusts the modified wrapper in arch/mips/fw/lib/call_o32.S to let callers request no stack switching by passing a null temporary stack pointer in $a1, reworks the DECstation callers to work with the updated interface and removes the old copy from arch/mips/dec/prom/call_o32.S. A few minor readability adjustments are included as well, most importantly O32_SZREG is now used throughout where applicable rather than hardcoded multiplies of 4 and $fp is used to access the argument save area as a more usual register to operate the stack with rather than $s0. Finally an update is made to the temporary stack space used by the SNI platform to guarantee 8-byte alignment as per o32 requirements. Signed-off-by: Maciej W. Rozycki Cc: Thomas Bogendoerfer Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6668/ Signed-off-by: Ralf Baechle

MIPS: DEC: Bus error handler fixes

2014-05-12T22:29:35Z

Commit 69f24d1784b631b81a54eb57c49bf46536dd2382 [MIPS: Optimize current_cpu_type() for better code.] missed an update for two DECstation bus error support files that now do not build, this is a fix. Signed-off-by: Maciej W. Rozycki Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6667/ Signed-off-by: Ralf Baechle

DEC: Whitespace cleanup

2013-10-29T20:24:44Z

Commit 7034228792cc561e79ff8600f02884bd4c80e287 [MIPS: Whitespace cleanup.] did a lot of good and a little damage. Revert the damage. Signed-off-by: Maciej W. Rozycki Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5875/ Signed-off-by: Ralf Baechle

MIPS: DECstation I/O ASIC DMA interrupt classes

2013-10-29T20:24:42Z

This change complements commits d0da7c002f7b2a93582187a9e3f73891a01d8ee4 [MIPS: DEC: Convert to new irq_chip functions] and 5359b938c088423a28c41499f183cd10824c1816 [MIPS: DECstation I/O ASIC DMA interrupt handling fix] and implements automatic handling of the two classes of DMA interrupts the I/O ASIC implements, informational and errors. Informational DMA interrupts do not stop the transfer and use the `handle_edge_irq' handler that clears the request right away so that another request may be recorded while the previous is being handled. DMA error interrupts stop the transfer and require a corrective action before DMA can be reenabled. Therefore they use the `handle_fasteoi_irq' handler that only clears the request on the way out. Because MIPS processor interrupt inputs, one of which the I/O ASIC's interrupt controller is cascaded to, are level-triggered it is recommended that error DMA interrupt action handlers are registered with the IRQF_ONESHOT flag set so that they are run with the interrupt line masked. This change removes the export of clear_ioasic_dma_irq that now does not have to be called by device drivers to clear interrupts explicitly anymore. Originally these interrupts were cleared in the .end handler of the `irq_chip' structure, before it was removed. Signed-off-by: Maciej W. Rozycki Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5874/ Signed-off-by: Ralf Baechle

MIPS: Optimize current_cpu_type() for better code.

2013-09-17T16:50:53Z

o Move current_cpu_type() to a separate header file o #ifdefing on supported CPU types lets modern GCC know that certain code in callers may be discarded ideally turning current_cpu_type() into a function returning a constant. o Use current_cpu_type() rather than direct access to struct cpuinfo_mips. Signed-off-by: Ralf Baechle Cc: Steven J. Hill Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5833/