user/sven/linux.git/arch/powerpc/platforms, branch leds/master

powerpc/powernv: Fix opal-elog interrupt handler

2015-07-06T10:24:36Z

The conversion of opal events to a proper irqchip means that handlers are called until the relevant opal event has been cleared by processing it. Events that queue work should therefore use a threaded handler to mask the event until processing is complete. Signed-off-by: Alistair Popple Tested-by: Aneesh Kumar K.V Signed-off-by: Michael Ellerman

powerpc/powernv: Fix vma page prot flags in opal-prd driver

2015-07-06T02:06:42Z

opal-prd driver will mmap() firmware code/data area as private mapping to prd user space daemon. Write to this page will trigger COW faults. The new COW pages are normal kernel RAM pages accounted by the kernel and are not special. vma->vm_page_prot value will be used at page fault time for the new COW pages, while pgprot_t value passed in remap_pfn_range() is used for the initial page table entry. Hence: * Do not add _PAGE_SPECIAL in vma, but only for remap_pfn_range() * Also remap_pfn_range() will add the _PAGE_SPECIAL flag using pte_mkspecial() call, hence no need to specify in the driver This fix resolves the page accounting warning shown below: BUG: Bad rss-counter state mm:c0000007d34ac600 idx:1 val:19 The above warning is triggered since _PAGE_SPECIAL was incorrectly being set for the normal kernel COW pages. Signed-off-by: Vaidyanathan Srinivasan Acked-by: Jeremy Kerr Signed-off-by: Michael Ellerman

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2015-07-05T02:36:06Z

Pull more vfs updates from Al Viro: "Assorted VFS fixes and related cleanups (IMO the most interesting in that part are f_path-related things and Eric's descriptor-related stuff). UFS regression fixes (it got broken last cycle). 9P fixes. fs-cache series, DAX patches, Jan's file_remove_suid() work" [ I'd say this is much more than "fixes and related cleanups". The file_table locking rule change by Eric Dumazet is a rather big and fundamental update even if the patch isn't huge. - Linus ] * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (49 commits) 9p: cope with bogus responses from server in p9_client_{read,write} p9_client_write(): avoid double p9_free_req() 9p: forgetting to cancel request on interrupted zero-copy RPC dax: bdev_direct_access() may sleep block: Add support for DAX reads/writes to block devices dax: Use copy_from_iter_nocache dax: Add block size note to documentation fs/file.c: __fget() and dup2() atomicity rules fs/file.c: don't acquire files->file_lock in fd_install() fs:super:get_anon_bdev: fix race condition could cause dev exceed its upper limitation vfs: avoid creation of inode number 0 in get_next_ino namei: make set_root_rcu() return void make simple_positive() public ufs: use dir_pages instead of ufs_dir_pages() pagemap.h: move dir_pages() over there remove the pointless include of lglock.h fs: cleanup slight list_entry abuse xfs: Correctly lock inode when removing suid and file capabilities fs: Call security_ops->inode_killpriv on truncate fs: Provide function telling whether file_remove_privs() will do anything ...

Merge tag 'module_init-device_initcall-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux

2015-07-02T17:30:48Z

Pull module_init replacement part one from Paul Gortmaker: "Replace module_init with equivalent device_initcall in non modules. This series of commits converts non-modular code that is using the module_init() call to hook itself into the system to instead use device_initcall(). The conversion is a runtime no-op, since module_init actually becomes __initcall in the non-modular case, and that in turn gets mapped onto device_initcall. A couple files show a larger negative diffstat, representing ones that had a module_exit function that we remove here vs previously relying on the linker to dispose of it. We make this conversion now, so that we can relocate module_init from init.h into module.h in the future. The files changed here are just limited to those that would otherwise have to add module.h to obviously non-modular code, in order to avoid a compile fail, as testing has shown" * tag 'module_init-device_initcall-v4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: MIPS: don't use module_init in non-modular cobalt/mtd.c file drivers/leds: don't use module_init in non-modular leds-cobalt-raq.c cris: don't use module_init for non-modular core eeprom.c code tty/metag_da: Avoid module_init/module_exit in non-modular code drivers/clk: don't use module_init in clk-nomadik.c which is non-modular xtensa: don't use module_init for non-modular core network.c code sh: don't use module_init in non-modular psw.c code mn10300: don't use module_init in non-modular flash.c code parisc64: don't use module_init for non-modular core perf code parisc: don't use module_init for non-modular core pdc_cons code cris: don't use module_init for non-modular core intmem.c code ia64: don't use module_init in non-modular sim/simscsi.c code ia64: don't use module_init for non-modular core kernel/mca.c code arm: don't use module_init in non-modular mach-vexpress/spc.c code powerpc: don't use module_init in non-modular 83xx suspend code powerpc: use device_initcall for registering rtc devices x86: don't use module_init in non-modular devicetree.c code x86: don't use module_init in non-modular intel_mid_vrtc.c

Merge tag 'powerpc-4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux

2015-06-24T15:46:32Z

Pull powerpc updates from Michael Ellerman: - disable the 32-bit vdso when building LE, so we can build with a 64-bit only toolchain. - EEH fixes from Gavin & Richard. - enable the sys_kcmp syscall from Laurent. - sysfs control for fastsleep workaround from Shreyas. - expose OPAL events as an irq chip by Alistair. - MSI ops moved to pci_controller_ops by Daniel. - fix for kernel to userspace backtraces for perf from Anton. - merge pseries and pseries_le defconfigs from Cyril. - CXL in-kernel API from Mikey. - OPAL prd driver from Jeremy. - fix for DSCR handling & tests from Anshuman. - Powernv flash mtd driver from Cyril. - dynamic DMA Window support on powernv from Alexey. - LLVM clang fixes & workarounds from Anton. - reworked version of the patch to abort syscalls when transactional. - fix the swap encoding to support 4TB, from Aneesh. - various fixes as usual. - Freescale updates from Scott: Highlights include more 8xx optimizations, an e6500 hugetlb optimization, QMan device tree nodes, t1024/t1023 support, and various fixes and cleanup. * tag 'powerpc-4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (180 commits) cxl: Fix typo in debug print cxl: Add CXL_KERNEL_API config option powerpc/powernv: Fix wrong IOMMU table in pnv_ioda_setup_bus_dma() powerpc/mm: Change the swap encoding in pte. powerpc/mm: PTE_RPN_MAX is not used, remove the same powerpc/tm: Abort syscalls in active transactions powerpc/iommu/ioda2: Enable compile with IOV=on and IOMMU_API=off powerpc/include: Add opal-prd to installed uapi headers powerpc/powernv: fix construction of opal PRD messages powerpc/powernv: Increase opal-irqchip initcall priority powerpc: Make doorbell check preemption safe powerpc/powernv: pnv_init_idle_states() should only run on powernv macintosh/nvram: Remove as unused powerpc: Don't use gcc specific options on clang powerpc: Don't use -mno-strict-align on clang powerpc: Only use -mtraceback=no, -mno-string and -msoft-float if toolchain supports it powerpc: Only use -mabi=altivec if toolchain supports it powerpc: Fix duplicate const clang warning in user access code vfio: powerpc/spapr: Support Dynamic DMA windows vfio: powerpc/spapr: Register memory and define IOMMU v2 ...

make simple_positive() public

2015-06-23T22:02:01Z

Signed-off-by: Al Viro

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux into next

2015-06-19T07:23:48Z

Freescale updates from Scott: "Highlights include more 8xx optimizations, an e6500 hugetlb optimization, QMan device tree nodes, t1024/t1023 support, and various fixes and cleanup."

powerpc/powernv: Fix wrong IOMMU table in pnv_ioda_setup_bus_dma()

2015-06-19T07:10:29Z

When pnv_pci_ioda_fixup() is called during PHB fixup time, each PE in the sorted list of PEs (phb::pe_dma_list) is iterated to setup the PE's DMA32 space by pnv_ioda_setup_bus_dma() if the PE's DMA32 weight is bigger than zero. The function also assigns all the subordinate PCI devices of the PE's primary bus with the PE's DMA32 IOMMU table. It causes the PCI devicess in the child PEs, which don't have DMA weight, receives wrong IOMMU table and then IOMMU group. The patch fixes above issue by more check on the PE's coverage and don't assign IOMMU table to those PCI devices, which belong to the child PEs. The problem was found on Firestone platform initially. Suggested-by: Gavin Shan Signed-off-by: Alexey Kardashevskiy Signed-off-by: Michael Ellerman

powerpc/iommu/ioda2: Enable compile with IOV=on and IOMMU_API=off

2015-06-17T21:16:02Z

The pnv_pci_ioda2_unset_window() function is used to do the final cleanup of a DMA window being released: - via VFIO ioctl by the guest request; - via unplugging a virtual PCI function. However the function was under #ifdef CONFIG_IOMMU_API and was missing. This moves the helper outside of IOMMU_API block and enables it for either or both IOMMU_API and PCI_IOV. Signed-off-by: Alexey Kardashevskiy Reviewed-by: David Gibson Signed-off-by: Michael Ellerman

powerpc/powernv: fix construction of opal PRD messages

2015-06-17T21:16:01Z

We currently have a bug in the PRD code, where the contents of an incoming message (beyond the header) will be overwritten by the list item manipulations when adding to to the prd_msg_queue. This change reorders struct opal_prd_msg_queue_item, so that the message body doesn't overlap the list_head. We also clarify the memcpy of the message, as we're copying unnecessary bytes at the end of the message data. Signed-off-by: Jeremy Kerr Acked-by: Stewart Smith Signed-off-by: Michael Ellerman