user/sven/linux.git/arch/powerpc/sysdev/Kconfig, branch v4.18.8

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

powerpc/xive: Native exploitation of the XIVE interrupt controller

2017-04-10T11:41:34Z

The XIVE interrupt controller is the new interrupt controller found in POWER9. It supports advanced virtualization capabilities among other things. Currently we use a set of firmware calls that simulate the old "XICS" interrupt controller but this is fairly inefficient. This adds the framework for using XIVE along with a native backend which OPAL for configuration. Later, a backend allowing the use in a KVM or PowerVM guest will also be provided. This disables some fast path for interrupts in KVM when XIVE is enabled as these rely on the firmware emulation code which is no longer available when the XIVE is used natively by Linux. A latter patch will make KVM also directly exploit the XIVE, thus recovering the lost performance (and more). Signed-off-by: Benjamin Herrenschmidt [mpe: Fixup pr_xxx("XIVE:"...), don't split pr_xxx() strings, tweak Kconfig so XIVE_NATIVE selects XIVE and depends on POWERNV, fix build errors when SMP=n, fold in fixes from Ben: Don't call cpu_online() on an invalid CPU number Fix irq target selection returning out of bounds cpu# Extra sanity checks on cpu numbers ] Signed-off-by: Michael Ellerman

powerpc/rcpm: add RCPM driver

2016-03-05T05:50:27Z

There is a RCPM (Run Control/Power Management) in Freescale QorIQ series processors. The device performs tasks associated with device run control and power management. The driver implements some features: mask/unmask irq, enter/exit low power states, freeze time base, etc. Signed-off-by: Chenhui Zhao Signed-off-by: Tang Yuantian [scottwood: remove __KERNEL__ ifdef] Signed-off-by: Scott Wood

powerpc: Added PCI MSI support using the HSTA module

2014-04-30T22:26:30Z

The PPC476GTR SoC supports message signalled interrupts (MSI) by writing to special addresses within the High Speed Transfer Assist (HSTA) module. This patch adds support for PCI MSI with a new system device. The DMA window is also updated to allow access to the entire 42-bit address range to allow PCI devices write access to the HSTA module. Signed-off-by: Alistair Popple Signed-off-by: Benjamin Herrenschmidt

powerpc/powernv: Replace CONFIG_POWERNV_MSI with just CONFIG_PPC_POWERNV

2013-12-02T03:16:39Z

We currently have a user visible CONFIG_POWERNV_MSI option, but it doesn't actually disable MSI for powernv. The MSI code is always built, what it does disable is the inclusion of the MSI bitmap code, which leads to a build error. eg, with PPC_POWERNV=y and POWERNV_MSI=n we get: arch/powerpc/platforms/built-in.o: In function `.pnv_teardown_msi_irqs': pci.c:(.text+0x3558): undefined reference to `.msi_bitmap_free_hwirqs' We don't really need a POWERNV_MSI symbol, just have the MSI bitmap code depend directly on PPC_POWERNV. Signed-off-by: Michael Ellerman Reviewed-by: Gavin Shan Signed-off-by: Benjamin Herrenschmidt

powerpc/scom: CONFIG_SCOM_DEBUGFS should depend on CONFIG_DEBUG_FS

2013-10-11T05:53:49Z

Signed-off-by: Benjamin Herrenschmidt

powerpc/powernv: Add option CONFIG_POWERNV_MSI

2013-04-26T06:09:58Z

As Michael Ellerman suggested, to add CONFIG_POWERNV_MSI for PowerNV platform. That's similar to CONFIG_PSERIES_MSI for pSeries platform. For now, we don't make it dependent on CONFIG_EEH since it's not ready to enable that yet. Apart from that, we also enable CONFIG_PPC_MSI_BITMAP on selecting CONFIG_POWERNV_MSI. Signed-off-by: Gavin Shan Signed-off-by: Benjamin Herrenschmidt

powerpc/powernv: Fix missing Kconfig dependency for MSIs

2013-04-24T05:15:33Z

We need PPC_MSI_BITMAP support Signed-off-by: Benjamin Herrenschmidt

powerpc: Move GE PIC drivers

2012-03-16T16:08:11Z

Move the GE PIC drivers to allow these to be used by non-86xx boards. Signed-off-by: Martyn Welch Signed-off-by: Kumar Gala

powerpc/4xx: Adding PCIe MSI support

2011-05-26T05:00:37Z

This patch adds MSI support for 440SPe, 460Ex, 460Sx and 405Ex. Signed-off-by: Rupjyoti Sarmah Signed-off-by: Tirumala R Marri Acked-by: Josh Boyer Signed-off-by: Benjamin Herrenschmidt