user/sven/linux.git/arch/powerpc/sysdev, branch v4.8.6

soc/fsl/qe: fix Oops on CPM1 (and likely CPM2)

2016-10-28T07:45:26Z

commit 4d486e0083796b54d5aeddd7a5794f897fca1008 upstream. Commit 0e6e01ff694ee ("CPM/QE: use genalloc to manage CPM/QE muram") has changed the way muram is managed. genalloc uses kmalloc(), hence requires the SLAB to be up and running. On powerpc 8xx, cpm_reset() is called early during startup. cpm_reset() then calls cpm_muram_init() before SLAB is available, hence the following Oops. cpm_reset() cannot be called during initcalls because the CPM is needed for console. This patch removes the call to cpm_muram_init() from cpm_reset(). cpm_muram_init() will be called from a new function called cpm_init() which is declared as subsys_initcall, unless cpm_muram_alloc() is called earlier for the serial console in which case cpm_muram_init() will be called from there. The reason for calling it from two places is that some drivers (e.g. i2c-cpm) need some of the initialisations done by cpm_muram_init() but don't call cpm_muram_alloc(). The console driver calls cpm_muram_alloc() but some platforms might not use the CPM serial ports for console. [ 0.000000] Unable to handle kernel paging request for data at address 0x00000008 [ 0.000000] Faulting instruction address: 0xc01acce0 [ 0.000000] Oops: Kernel access of bad area, sig: 11 [#1] [ 0.000000] PREEMPT CMPC885 [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.4.14-g0886ed8 #5 [ 0.000000] task: c05183e0 ti: c0536000 task.ti: c0536000 [ 0.000000] NIP: c01acce0 LR: c0011068 CTR: 00000000 [ 0.000000] REGS: c0537e50 TRAP: 0300 Not tainted (4.4.14-s3k-dev-g0886ed8-svn) [ 0.000000] MSR: 00001032 CR: 28044428 XER: 00000000 [ 0.000000] DAR: 00000008 DSISR: c0000000 GPR00: c0011068 c0537f00 c05183e0 00000000 00009000 ffffffff 00000bc0 ffffffff GPR08: ff003000 ff00b000 ff003bbf 00000000 22044422 100d43a8 00000000 07ff94e8 GPR16: 00000000 07bb5d70 00000000 07ff81f4 07ff81f4 07ff81f4 00000000 00000000 GPR24: 07ffb3a0 07fe7628 c0550000 c7ffa190 c0540000 ff003bbf 00000000 00000001 [ 0.000000] NIP [c01acce0] gen_pool_add_virt+0x14/0xdc [ 0.000000] LR [c0011068] cpm_muram_init+0xd4/0x18c [ 0.000000] Call Trace: [ 0.000000] [c0537f00] [00000200] 0x200 (unreliable) [ 0.000000] [c0537f20] [c0011068] cpm_muram_init+0xd4/0x18c [ 0.000000] [c0537f70] [c0494684] cpm_reset+0xb4/0xc8 [ 0.000000] [c0537f90] [c0494c64] cmpc885_setup_arch+0x10/0x30 [ 0.000000] [c0537fa0] [c0493cd4] setup_arch+0x130/0x168 [ 0.000000] [c0537fb0] [c04906bc] start_kernel+0x88/0x380 [ 0.000000] [c0537ff0] [c0002224] start_here+0x38/0x98 [ 0.000000] Instruction dump: [ 0.000000] 91430010 91430014 80010014 83e1000c 7c0803a6 38210010 4e800020 7c0802a6 [ 0.000000] 9421ffe0 bf61000c 90010024 7c7e1b78 <80630008> 7c9c2378 7cc31c30 3863001f [ 0.000000] ---[ end trace dc8fa200cb88537f ]--- fixes: 0e6e01ff694ee ("CPM/QE: use genalloc to manage CPM/QE muram") Signed-off-by: Christophe Leroy [scottwood: Removed some string changes unrelated to bugfix] Signed-off-by: Scott Wood Signed-off-by: Greg Kroah-Hartman

powerpc/xics/opal: Fix processor numbers in OPAL ICP

2016-09-06T04:54:45Z

When using the OPAL ICP backend we incorrectly pass Linux CPU numbers rather than HW CPU numbers to OPAL. Fixes: d74361881f0d ("powerpc/xics: Add ICP OPAL backend") Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Michael Ellerman

powerpc: sysdev: cpm: fix gpio save_regs functions

2016-08-22T01:09:33Z

of_mm_gpiochip_add_data() calls mm_gc->save_regs() before setting the data. Therefore ->save_regs() cannot use gpiochip_get_data() [ 0.275940] Unable to handle kernel paging request for data at address 0x00000130 [ 0.283120] Faulting instruction address: 0xc01b44cc [ 0.288175] Oops: Kernel access of bad area, sig: 11 [#1] [ 0.293343] PREEMPT CMPC885 [ 0.296141] CPU: 0 PID: 1 Comm: swapper Not tainted 4.7.0-g65124df-dirty #68 [ 0.304131] task: c6074000 ti: c6080000 task.ti: c6080000 [ 0.309459] NIP: c01b44cc LR: c0011720 CTR: c0011708 [ 0.314372] REGS: c6081d90 TRAP: 0300 Not tainted (4.7.0-g65124df-dirty) [ 0.322267] MSR: 00009032 CR: 24000028 XER: 20000000 [ 0.328813] DAR: 00000130 DSISR: c0000000 GPR00: c01b6d0c c6081e40 c6074000 c6017000 c9028000 c601d028 c6081dd8 00000000 GPR08: c601d028 00000000 ffffffff 00000001 24000044 00000000 c0002790 00000000 GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 c05643b0 00000083 GPR24: c04a1a6c c0560000 c04a8308 c04c6480 c0012498 c6017000 c7ffcc78 c6017000 [ 0.360806] NIP [c01b44cc] gpiochip_get_data+0x4/0xc [ 0.365684] LR [c0011720] cpm1_gpio16_save_regs+0x18/0x44 [ 0.370972] Call Trace: [ 0.373451] [c6081e50] [c01b6d0c] of_mm_gpiochip_add_data+0x70/0xdc [ 0.379624] [c6081e70] [c00124c0] cpm_init_par_io+0x28/0x118 [ 0.385238] [c6081e80] [c04a8ac0] do_one_initcall+0xb0/0x17c [ 0.390819] [c6081ef0] [c04a8cbc] kernel_init_freeable+0x130/0x1dc [ 0.396924] [c6081f30] [c00027a4] kernel_init+0x14/0x110 [ 0.402177] [c6081f40] [c000b424] ret_from_kernel_thread+0x5c/0x64 [ 0.408233] Instruction dump: [ 0.411168] 4182fafc 3f80c040 48234c6d 3bc0fff0 3b9c5ed0 4bfffaf4 81290020 712a0004 [ 0.418825] 4182fb34 48234c51 4bfffb2c 81230004 <80690130> 4e800020 7c0802a6 9421ffe0 [ 0.426763] ---[ end trace fe4113ee21d72ffa ]--- fixes: e65078f1f3490 ("powerpc: sysdev: cpm1: use gpiochip data pointer") fixes: a14a2d484b386 ("powerpc: cpm_common: use gpiochip data pointer") Cc: stable@vger.kernel.org Signed-off-by: Christophe Leroy Reviewed-by: Linus Walleij Signed-off-by: Benjamin Herrenschmidt

powerpc: migrate exception table users off module.h and onto extable.h

2016-08-22T01:09:33Z

These files were only including module.h for exception table related functions. We've now separated that content out into its own file "extable.h" so now move over to that and avoid all the extra header content in module.h that we don't really need to compile these files. Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Michael Ellerman Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Paul Gortmaker Signed-off-by: Benjamin Herrenschmidt

powerpc/xics: Properly set Edge/Level type and enable resend

2016-08-09T04:50:18Z

This sets the type of the interrupt appropriately. We set it as follow: - If not mapped from the device-tree, we use edge. This is the case of the virtual interrupts and PCI MSIs for example. - If mapped from the device-tree and #interrupt-cells is 2 (PAPR compliant), we use the second cell to set the appropriate type - If mapped from the device-tree and #interrupt-cells is 1 (current OPAL on P8 does that), we assume level sensitive since those are typically going to be the PSI LSIs which are level sensitive. Additionally, we mark the interrupts requested via the opal_interrupts property all level. This is a bit fishy but the best we can do until we fix OPAL to properly expose them with a complete descriptor. It is also correct for the current HW anyway as OPAL interrupts are currently PCI error and PSI interrupts which are level. Finally now that edge interrupts are properly identified, we can enable CONFIG_HARDIRQS_SW_RESEND which will make the core re-send them if they occur while masked, which some drivers rely upon. This fixes issues with lost interrupts on some Mellanox adapters. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Michael Ellerman

powerpc/fsl_rio: fix a missing error code

2016-08-05T00:02:09Z

We should set the error code here rather than incorrectly returning 0. Otherwise static checkers complain. Link: http://lkml.kernel.org/r/20160804053525.GM775@mwanda Signed-off-by: Dan Carpenter Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Michael Ellerman Cc: Alexandre Bounine Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

dma-mapping: use unsigned long for dma_attrs

2016-08-04T12:50:07Z

The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski Acked-by: Vineet Gupta Acked-by: Robin Murphy Acked-by: Hans-Christian Noren Egtvedt Acked-by: Mark Salter [c6x] Acked-by: Jesper Nilsson [cris] Acked-by: Daniel Vetter [drm] Reviewed-by: Bart Van Assche Acked-by: Joerg Roedel [iommu] Acked-by: Fabien Dessenne [bdisp] Reviewed-by: Marek Szyprowski [vb2-core] Acked-by: David Vrabel [xen] Acked-by: Konrad Rzeszutek Wilk [xen swiotlb] Acked-by: Joerg Roedel [iommu] Acked-by: Richard Kuo [hexagon] Acked-by: Geert Uytterhoeven [m68k] Acked-by: Gerald Schaefer [s390] Acked-by: Bjorn Andersson Acked-by: Hans-Christian Noren Egtvedt [avr32] Acked-by: Vineet Gupta [arc] Acked-by: Robin Murphy [arm64 and dma-iommu] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

powerpc/fsl_rio: apply changes for RIO spec rev 3

2016-08-02T23:35:38Z

- Remove check for parallel PHY - Set LP-Serial Register Map type [akpm@linux-foundation.org: fix build] [alexandre.bounine@idt.com: fix build fix] Link: http://lkml.kernel.org/r/20160802184932.2755-1-alexandre.bounine@idt.com Link: http://lkml.kernel.org/r/1469125134-16523-13-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine Cc: Matt Porter Cc: Benjamin Herrenschmidt Cc: Michael Ellerman Cc: Andre van Herk Cc: Barry Wood Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

rapidio: change inbound window size type to u64

2016-08-02T23:35:37Z

Current definition of map_inb() mport operations callback uses u32 type to specify required inbound window (IBW) size. This is limiting factor because existing hardware - tsi721 and fsl_rio, both support IBW size up to 16GB. Changing type of size parameter to u64 to allow IBW size configurations larger than 4GB. [alexandre.bounine@idt.com: remove compiler warning about size of constant] Link: http://lkml.kernel.org/r/20160802184856.2566-1-alexandre.bounine@idt.com Link: http://lkml.kernel.org/r/1469125134-16523-11-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine Cc: Matt Porter Cc: Benjamin Herrenschmidt Cc: Michael Ellerman Cc: Andre van Herk Cc: Barry Wood Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

treewide: replace obsolete _refok by __ref

2016-08-02T21:31:41Z

There was only one use of __initdata_refok and __exit_refok __init_refok was used 46 times against 82 for __ref. Those definitions are obsolete since commit 312b1485fb50 ("Introduce new section reference annotations tags: __ref, __refdata, __refconst") This patch removes the following compatibility definitions and replaces them treewide. /* compatibility defines */ #define __init_refok __ref #define __initdata_refok __refdata #define __exit_refok __ref I can also provide separate patches if necessary. (One patch per tree and check in 1 month or 2 to remove old definitions) [akpm@linux-foundation.org: coding-style fixes] Link: http://lkml.kernel.org/r/1466796271-3043-1-git-send-email-fabf@skynet.be Signed-off-by: Fabian Frederick Cc: Ingo Molnar Cc: Sam Ravnborg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds