user/sven/linux.git/arch/s390/kernel, branch v5.7

s390/kaslr: add support for R_390_JMP_SLOT relocation type

2020-05-20T08:13:27Z

With certain kernel configurations, the R_390_JMP_SLOT relocation type might be generated, which is not expected by the KASLR relocation code, and the kernel stops with the message "Unknown relocation type". This was found with a zfcpdump kernel config, where CONFIG_MODULES=n and CONFIG_VFIO=n. In that case, symbol_get() is used on undefined __weak symbols in virt/kvm/vfio.c, which results in the generation of R_390_JMP_SLOT relocation types. Fix this by handling R_390_JMP_SLOT similar to R_390_GLOB_DAT. Fixes: 805bc0bc238f ("s390/kernel: build a relocatable kernel") Cc: # v5.2+ Signed-off-by: Gerald Schaefer Reviewed-by: Philipp Rudo Signed-off-by: Vasily Gorbik

s390/kexec_file: fix initrd location for kdump kernel

2020-05-14T21:21:37Z

initrd_start must not point at the location the initrd is loaded into the crashkernel memory but at the location it will be after the crashkernel memory is swapped with the memory at 0. Fixes: ee337f5469fd ("s390/kexec_file: Add crash support to image loader") Reported-by: Lianbo Jiang Signed-off-by: Philipp Rudo Tested-by: Lianbo Jiang Link: https://lore.kernel.org/r/20200512193956.15ae3f23@laptop2-ibm.local Signed-off-by: Christian Borntraeger Signed-off-by: Vasily Gorbik

s390/protvirt: fix compilation issue

2020-04-25T08:17:24Z

The kernel fails to compile with CONFIG_PROTECTED_VIRTUALIZATION_GUEST set but CONFIG_KVM unset. This patch fixes the issue by making the needed variable always available. Link: https://lkml.kernel.org/r/20200423120114.2027410-1-imbrenda@linux.ibm.com Fixes: a0f60f843199 ("s390/protvirt: Add sysfs firmware interface for Ultravisor information") Reported-by: kbuild test robot Reported-by: Philipp Rudo Suggested-by: Philipp Rudo Reviewed-by: David Hildenbrand Reviewed-by: Cornelia Huck Reviewed-by: Vasily Gorbik Acked-by: Christian Borntraeger Signed-off-by: Claudio Imbrenda Signed-off-by: Vasily Gorbik

s390/ftrace: fix potential crashes when switching tracers

2020-04-22T14:20:55Z

Switching tracers include instruction patching. To prevent that a instruction is patched while it's read the instruction patching is done in stop_machine 'context'. This also means that any function called during stop_machine must not be traced. Thus add 'notrace' to all functions called within stop_machine. Fixes: 1ec2772e0c3c ("s390/diag: add a statistic for diagnose calls") Fixes: 38f2c691a4b3 ("s390: improve wait logic of stop_machine") Fixes: 4ecf0a43e729 ("processor: get rid of cpu_relax_yield") Signed-off-by: Philipp Rudo Signed-off-by: Vasily Gorbik

Merge tag 's390-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2020-04-04T16:45:50Z

Pull s390 updates from Vasily Gorbik: - Update maintainers. Niklas Schnelle takes over zpci and Vineeth Vijayan common io code. - Extend cpuinfo to include topology information. - Add new extended counters for IBM z15 and sampling buffer allocation rework in perf code. - Add control over zeroing out memory during system restart. - CCA protected key block version 2 support and other fixes/improvements in crypto code. - Convert to new fallthrough; annotations. - Replace zero-length arrays with flexible-arrays. - QDIO debugfs and other small improvements. - Drop 2-level paging support optimization for compat tasks. Varios mm cleanups. - Remove broken and unused hibernate / power management support. - Remove fake numa support which does not bring any benefits. - Exclude offline CPUs from CPU topology masks to be more consistent with other architectures. - Prevent last branching instruction address leaking to userspace. - Other small various fixes and improvements all over the code. * tag 's390-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (57 commits) s390/mm: cleanup init_new_context() callback s390/mm: cleanup virtual memory constants usage s390/mm: remove page table downgrade support s390/qdio: set qdio_irq->cdev at allocation time s390/qdio: remove unused function declarations s390/ccwgroup: remove pm support s390/ap: remove power management code from ap bus and drivers s390/zcrypt: use kvmalloc instead of kmalloc for 256k alloc s390/mm: cleanup arch_get_unmapped_area() and friends s390/ism: remove pm support s390/cio: use fallthrough; s390/vfio: use fallthrough; s390/zcrypt: use fallthrough; s390: use fallthrough; s390/cpum_sf: Fix wrong page count in error message s390/diag: fix display of diagnose call statistics s390/ap: Remove ap device suspend and resume callbacks s390/pci: Improve handling of unset UID s390/pci: Fix zpci_alloc_domain() over allocation s390/qdio: pass ISC as parameter to chsc_sadc() ...

Merge tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx

2020-04-03T20:12:26Z

Pull SPDX updates from Greg KH: "Here are three SPDX patches for 5.7-rc1. One fixes up the SPDX tag for a single driver, while the other two go through the tree and add SPDX tags for all of the .gitignore files as needed. Nothing too complex, but you will get a merge conflict with your current tree, that should be trivial to handle (one file modified by two things, one file deleted.) All three of these have been in linux-next for a while, with no reported issues other than the merge conflict" * tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: ASoC: MT6660: make spdxcheck.py happy .gitignore: add SPDX License Identifier .gitignore: remove too obvious comments

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2020-04-02T22:13:15Z

Pull kvm updates from Paolo Bonzini: "ARM: - GICv4.1 support - 32bit host removal PPC: - secure (encrypted) using under the Protected Execution Framework ultravisor s390: - allow disabling GISA (hardware interrupt injection) and protected VMs/ultravisor support. x86: - New dirty bitmap flag that sets all bits in the bitmap when dirty page logging is enabled; this is faster because it doesn't require bulk modification of the page tables. - Initial work on making nested SVM event injection more similar to VMX, and less buggy. - Various cleanups to MMU code (though the big ones and related optimizations were delayed to 5.8). Instead of using cr3 in function names which occasionally means eptp, KVM too has standardized on "pgd". - A large refactoring of CPUID features, which now use an array that parallels the core x86_features. - Some removal of pointer chasing from kvm_x86_ops, which will also be switched to static calls as soon as they are available. - New Tigerlake CPUID features. - More bugfixes, optimizations and cleanups. Generic: - selftests: cleanups, new MMU notifier stress test, steal-time test - CSV output for kvm_stat" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (277 commits) x86/kvm: fix a missing-prototypes "vmread_error" KVM: x86: Fix BUILD_BUG() in __cpuid_entry_get_reg() w/ CONFIG_UBSAN=y KVM: VMX: Add a trampoline to fix VMREAD error handling KVM: SVM: Annotate svm_x86_ops as __initdata KVM: VMX: Annotate vmx_x86_ops as __initdata KVM: x86: Drop __exit from kvm_x86_ops' hardware_unsetup() KVM: x86: Copy kvm_x86_ops by value to eliminate layer of indirection KVM: x86: Set kvm_x86_ops only after ->hardware_setup() completes KVM: VMX: Configure runtime hooks using vmx_x86_ops KVM: VMX: Move hardware_setup() definition below vmx_x86_ops KVM: x86: Move init-only kvm_x86_ops to separate struct KVM: Pass kvm_init()'s opaque param to additional arch funcs s390/gmap: return proper error code on ksm unsharing KVM: selftests: Fix cosmetic copy-paste error in vm_mem_region_move() KVM: Fix out of range accesses to memslots KVM: X86: Micro-optimize IPI fastpath delay KVM: X86: Delay read msr data iff writes ICR MSR KVM: PPC: Book3S HV: Add a capability for enabling secure guests KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs KVM: arm64: GICv4.1: Allow non-trapping WFI when using HW SGIs ...

s390: use fallthrough;

2020-03-25T11:39:37Z

Convert the various uses of fallthrough comments to fallthrough; Done via script Link: https://lore.kernel.org/lkml/b56602fcf79f849e733e7b521bb0e17895d390fa.1582230379.git.joe.com/ Signed-off-by: Joe Perches Signed-off-by: Heiko Carstens Signed-off-by: Vasily Gorbik

s390/cpum_sf: Fix wrong page count in error message

2020-03-25T11:39:37Z

When perf record -e SF_CYCLES_BASIC_DIAG runs with very high frequency, the samples arrive faster than the perf process can save them to file. Eventually, for longer running processes, this leads to the siutation where the trace buffers allocated by perf slowly fills up. At one point the auxiliary trace buffer is full and the CPU Measurement sampling facility is turned off. Furthermore a warning is printed to the kernel log buffer: cpum_sf: The AUX buffer with 0 pages for the diagnostic-sampling mode is full The number of allocated pages for the auxiliary trace buffer is shown as zero pages. That is wrong. Fix this by saving the number of allocated pages before entering the work loop in the interrupt handler. When the interrupt handler processes the samples, it may detect the buffer full condition and stop sampling, reducing the buffer size to zero. Print the correct value in the error message: cpum_sf: The AUX buffer with 256 pages for the diagnostic-sampling mode is full Signed-off-by: Thomas Richter Signed-off-by: Vasily Gorbik

s390/diag: fix display of diagnose call statistics

2020-03-25T11:39:37Z

Show the full diag statistic table and not just parts of it. The issue surfaced in a KVM guest with a number of vcpus defined smaller than NR_DIAG_STAT. Fixes: 1ec2772e0c3c ("s390/diag: add a statistic for diagnose calls") Cc: stable@vger.kernel.org Signed-off-by: Michael Mueller Reviewed-by: Heiko Carstens Signed-off-by: Vasily Gorbik