user/sven/linux.git/arch/sh/include, branch v4.9.254

pinctrl: sh-pfc: sh7269: Fix CAN function GPIOs

2020-02-28T14:42:28Z

[ Upstream commit 02aeb2f21530c98fc3ca51028eda742a3fafbd9f ] pinmux_func_gpios[] contains a hole due to the missing function GPIO definition for the "CTX0&CTX1" signal, which is the logical "AND" of the first two CAN outputs. A closer look reveals other issues: - Some functionality is available on alternative pins, but the PINMUX_DATA() entries is using the wrong marks, - Several configurations are missing. Fix this by: - Renaming CTX0CTX1CTX2_MARK, CRX0CRX1_PJ22_MARK, and CRX0CRX1CRX2_PJ20_MARK to CTX0_CTX1_CTX2_MARK, CRX0_CRX1_PJ22_MARK, resp. CRX0_CRX1_CRX2_PJ20_MARK for consistency with the corresponding enum IDs, - Adding all missing enum IDs and marks, - Use the right (*_PJ2x) variants for alternative pins, - Adding all missing configurations to pinmux_data[], - Adding all missing function GPIO definitions to pinmux_func_gpios[]. See SH7268 Group, SH7269 Group User’s Manual: Hardware, Rev. 2.00: [1] Table 1.4 List of Pins [2] Figure 23.29 Connection Example when Using Channels 0 and 1 as One Channel (64 Mailboxes × 1 Channel) and Channel 2 as One Channel (32 Mailboxes × 1 Channel), [3] Figure 23.30 Connection Example when Using Channels 0, 1, and 2 as One Channel (96 Mailboxes × 1 Channel), [4] Table 48.3 Multiplexed Pins (Port B), [5] Table 48.4 Multiplexed Pins (Port C), [6] Table 48.10 Multiplexed Pins (Port J), [7] Section 48.2.4 Port B Control Registers 0 to 5 (PBCR0 to PBCR5). Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20191218194812.12741-5-geert+renesas@glider.be Signed-off-by: Sasha Levin

pinctrl: sh-pfc: sh7734: Fix duplicate TCLK1_B

2020-01-04T12:39:31Z

[ Upstream commit 884caadad128efad8e00c1cdc3177bc8912ee8ec ] The definitions for bit field [19:18] of the Peripheral Function Select Register 3 were accidentally copied from bit field [20], leading to duplicates for the TCLK1_B function, and missing TCLK0, CAN_CLK_B, and ET0_ETXD4 functions. Fix this by adding the missing GPIO_FN_CAN_CLK_B and GPIO_FN_ET0_ETXD4 enum values, and correcting the functions. Reported-by: Ben Dooks Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20191024131308.16659-1-geert+renesas@glider.be Signed-off-by: Sasha Levin

sh: prevent warnings when using iounmap

2019-08-04T07:33:41Z

[ Upstream commit 733f0025f0fb43e382b84db0930ae502099b7e62 ] When building drm/exynos for sh, as part of an allmodconfig build, the following warning triggered: exynos7_drm_decon.c: In function `decon_remove': exynos7_drm_decon.c:769:24: warning: unused variable `ctx' struct decon_context *ctx = dev_get_drvdata(&pdev->dev); The ctx variable is only used as argument to iounmap(). In sh - allmodconfig CONFIG_MMU is not defined so it ended up in: \#define __iounmap(addr) do { } while (0) \#define iounmap __iounmap Fix the warning by introducing a static inline function for iounmap. This is similar to several other architectures. Link: http://lkml.kernel.org/r/20190622114208.24427-1-sam@ravnborg.org Signed-off-by: Sam Ravnborg Reviewed-by: Geert Uytterhoeven Cc: Yoshinori Sato Cc: Rich Felker Cc: Will Deacon Cc: Mark Brown Cc: Inki Dae Cc: Krzysztof Kozlowski Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

futex: Remove duplicated code and fix undefined behaviour

2018-05-19T08:27:00Z

commit 30d6e0a4190d37740e9447e4e4815f06992dd8c3 upstream. There is code duplicated over all architecture's headers for futex_atomic_op_inuser. Namely op decoding, access_ok check for uaddr, and comparison of the result. Remove this duplication and leave up to the arches only the needed assembly which is now in arch_futex_atomic_op_inuser. This effectively distributes the Will Deacon's arm64 fix for undefined behaviour reported by UBSAN to all architectures. The fix was done in commit 5f16a046f8e1 (arm64: futex: Fix undefined behaviour with FUTEX_OP_OPARG_SHIFT usage). Look there for an example dump. And as suggested by Thomas, check for negative oparg too, because it was also reported to cause undefined behaviour report. Note that s390 removed access_ok check in d12a29703 ("s390/uaccess: remove pointless access_ok() checks") as access_ok there returns true. We introduce it back to the helper for the sake of simplicity (it gets optimized away anyway). Signed-off-by: Jiri Slaby Signed-off-by: Thomas Gleixner Acked-by: Russell King Acked-by: Michael Ellerman (powerpc) Acked-by: Heiko Carstens [s390] Acked-by: Chris Metcalf [for tile] Reviewed-by: Darren Hart (VMware) Reviewed-by: Will Deacon [core/arm64] Cc: linux-mips@linux-mips.org Cc: Rich Felker Cc: linux-ia64@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: peterz@infradead.org Cc: Benjamin Herrenschmidt Cc: Max Filippov Cc: Paul Mackerras Cc: sparclinux@vger.kernel.org Cc: Jonas Bonn Cc: linux-s390@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: Yoshinori Sato Cc: linux-hexagon@vger.kernel.org Cc: Helge Deller Cc: "James E.J. Bottomley" Cc: Catalin Marinas Cc: Matt Turner Cc: linux-snps-arc@lists.infradead.org Cc: Fenghua Yu Cc: Arnd Bergmann Cc: linux-xtensa@linux-xtensa.org Cc: Stefan Kristiansson Cc: openrisc@lists.librecores.org Cc: Ivan Kokshaysky Cc: Stafford Horne Cc: linux-arm-kernel@lists.infradead.org Cc: Richard Henderson Cc: Chris Zankel Cc: Michal Simek Cc: Tony Luck Cc: linux-parisc@vger.kernel.org Cc: Vineet Gupta Cc: Ralf Baechle Cc: Richard Kuo Cc: linux-alpha@vger.kernel.org Cc: Martin Schwidefsky Cc: linuxppc-dev@lists.ozlabs.org Cc: "David S. Miller" Link: http://lkml.kernel.org/r/20170824073105.3901-1-jslaby@suse.cz Cc: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

Merge branch 'work.uaccess2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2016-10-12T06:38:39Z

Pull uaccess.h prepwork from Al Viro: "Preparations to tree-wide switch to use of linux/uaccess.h (which, obviously, will allow to start unifying stuff for real). The last step there, ie PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*' sed -i -e "s!$PATT!#include !" \ `git grep -l "$PATT"|grep -v ^include/linux/uaccess.h` is not taken here - I would prefer to do it once just before or just after -rc1. However, everything should be ready for it" * 'work.uaccess2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: remove a stray reference to asm/uaccess.h in docs sparc64: separate extable_64.h, switch elf_64.h to it score: separate extable.h, switch module.h to it mips: separate extable.h, switch module.h to it x86: separate extable.h, switch sections.h to it remove stray include of asm/uaccess.h from cacheflush.h mn10300: remove a bogus processor.h->uaccess.h include xtensa: split uaccess.h into C and asm sides bonding: quit messing with IOCTL kill __kernel_ds_p off mn10300: finish verify_area() off frv: move HAVE_ARCH_UNMAPPED_AREA to pgtable.h exceptions: detritus removal

exceptions: detritus removal

2016-09-28T01:15:14Z

externs and defines for stuff that is never used Signed-off-by: Al Viro

locking/atomic, arch/sh: Fix ATOMIC_FETCH_OP()

2016-09-22T12:47:02Z

We cannot use the "z" constraint twice, since its a single register (r0). Change the one not used by movli.l/movco.l to "r". Reported-by: Fengguang Wu Tested-by: Fengguang Wu Signed-off-by: Peter Zijlstra (Intel) Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Rich Felker Cc: Thomas Gleixner Cc: Yoshinori Sato Signed-off-by: Ingo Molnar

sh: fix copy_from_user()

2016-09-13T21:50:15Z

Cc: stable@vger.kernel.org Signed-off-by: Al Viro

sh64: failing __get_user() should zero

2016-09-13T21:50:14Z

It could be done in exception-handling bits in __get_user_b() et.al., but the surgery involved would take more knowledge of sh64 details than I have or _want_ to have. Cc: stable@vger.kernel.org Signed-off-by: Al Viro

Merge tag 'sh-for-4.8' of git://git.libc.org/linux-sh

2016-08-06T13:00:05Z

Pull arch/sh updates from Rich Felker: "These changes improve device tree support (including builtin DTB), add support for the J-Core J2 processor, an open source synthesizable reimplementation of the SH-2 ISA, resolve a longstanding sigcontext ABI mismatch issue, and fix various bugs including nommu-specific issues and minor regressions introduced in 4.6. The J-Core arch support is included here but to be usable it needs drivers that are waiting on approval/inclusion from their subsystem maintainers" * tag 'sh-for-4.8' of git://git.libc.org/linux-sh: (23 commits) sh: add device tree source for J2 FPGA on Mimas v2 board sh: add defconfig for J-Core J2 sh: use common clock framework with device tree boards sh: system call wire up sh: Delete unnecessary checks before the function call "mempool_destroy" sh: do not perform IPI-based cache flush except on boards that need it sh: add SMP support for J2 sh: SMP support for SH2 entry.S sh: add working futex atomic ops on userspace addresses for smp sh: add J2 atomics using the cas.l instruction sh: add AT_HWCAP flag for J-Core cas.l instruction sh: add support for J-Core J2 processor sh: fix build regression with CONFIG_OF && !CONFIG_OF_FLATTREE sh: allow clocksource drivers to register sched_clock backends sh: make heartbeat driver explicitly non-modular sh: make board-secureedge5410 explicitly non-modular sh: make mm/asids-debugfs explicitly non-modular sh: make time.c explicitly non-modular sh: fix futex/robust_list on nommu models sh: disable aliased page logic on NOMMU models ...