user/sven/linux.git/arch, branch v4.19.168

KVM: arm64: Don't access PMCR_EL0 when no PMU is available

2021-01-17T13:04:23Z

commit 2a5f1b67ec577fb1544b563086e0377f095f88e2 upstream. We reset the guest's view of PMCR_EL0 unconditionally, based on the host's view of this register. It is however legal for an implementation not to provide any PMU, resulting in an UNDEF. The obvious fix is to skip the reset of this shadow register when no PMU is available, sidestepping the issue entirely. If no PMU is available, the guest is not able to request a virtual PMU anyway, so not doing nothing is the right thing to do! It is unlikely that this bug can hit any HW implementation though, as they all provide a PMU. It has been found using nested virt with the host KVM not implementing the PMU itself. Fixes: ab9468340d2bc ("arm64: KVM: Add access handler for PMCR register") Reviewed-by: Alexandru Elisei Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20201210083059.1277162-1-maz@kernel.org Signed-off-by: Greg Kroah-Hartman

ARM: OMAP2+: omap_device: fix idling of devices during probe

2021-01-17T13:04:21Z

commit ec76c2eea903947202098090bbe07a739b5246e9 upstream. On the GTA04A5 od->_driver_status was not set to BUS_NOTIFY_BIND_DRIVER during probe of the second mmc used for wifi. Therefore omap_device_late_idle idled the device during probing causing oopses when accessing the registers. It was not set because od->_state was set to OMAP_DEVICE_STATE_IDLE in the notifier callback. Therefore set od->_driver_status also in that case. This came apparent after commit 21b2cec61c04 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4") causing this oops: omap_hsmmc 480b4000.mmc: omap_device_late_idle: enabled but no driver. Idling 8<--- cut here --- Unhandled fault: external abort on non-linefetch (0x1028) at 0xfa0b402c ... (omap_hsmmc_set_bus_width) from [] (omap_hsmmc_set_ios+0x11c/0x258) (omap_hsmmc_set_ios) from [] (mmc_power_up.part.8+0x3c/0xd0) (mmc_power_up.part.8) from [] (mmc_start_host+0x88/0x9c) (mmc_start_host) from [] (mmc_add_host+0x58/0x84) (mmc_add_host) from [] (omap_hsmmc_probe+0x5fc/0x8c0) (omap_hsmmc_probe) from [] (platform_drv_probe+0x48/0x98) (platform_drv_probe) from [] (really_probe+0x1dc/0x3b4) Fixes: 04abaf07f6d5 ("ARM: OMAP2+: omap_device: Sync omap_device and pm_runtime after probe defer") Fixes: 21b2cec61c04 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4") Acked-by: Ulf Hansson Signed-off-by: Andreas Kemnade [tony@atomide.com: left out extra parens, trimmed description stack trace] Signed-off-by: Tony Lindgren Signed-off-by: Greg Kroah-Hartman

x86/resctrl: Don't move a task to the same resource group

2021-01-17T13:04:20Z

commit a0195f314a25582b38993bf30db11c300f4f4611 upstream Shakeel Butt reported in [1] that a user can request a task to be moved to a resource group even if the task is already in the group. It just wastes time to do the move operation which could be costly to send IPI to a different CPU. Add a sanity check to ensure that the move operation only happens when the task is not already in the resource group. [1] https://lore.kernel.org/lkml/CALvZod7E9zzHwenzf7objzGKsdBmVwTgEJ0nPgs0LUFU3SN5Pw@mail.gmail.com/ Backporting notes: Since upstream commit fa7d949337cc ("x86/resctrl: Rename and move rdt files to a separate directory"), the file arch/x86/kernel/cpu/intel_rdt_rdtgroup.c has been renamed and moved to arch/x86/kernel/cpu/resctrl/rdtgroup.c. Apply the change against file arch/x86/kernel/cpu/intel_rdt_rdtgroup.c for older stable trees. Fixes: e02737d5b826 ("x86/intel_rdt: Add tasks files") Reported-by: Shakeel Butt Signed-off-by: Fenghua Yu Signed-off-by: Reinette Chatre Signed-off-by: Borislav Petkov Reviewed-by: Tony Luck Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/962ede65d8e95be793cb61102cca37f7bb018e66.1608243147.git.reinette.chatre@intel.com Signed-off-by: Greg Kroah-Hartman

x86/resctrl: Use an IPI instead of task_work_add() to update PQR_ASSOC MSR

2021-01-17T13:04:20Z

commit ae28d1aae48a1258bd09a6f707ebb4231d79a761 upstream Currently, when moving a task to a resource group the PQR_ASSOC MSR is updated with the new closid and rmid in an added task callback. If the task is running, the work is run as soon as possible. If the task is not running, the work is executed later in the kernel exit path when the kernel returns to the task again. Updating the PQR_ASSOC MSR as soon as possible on the CPU a moved task is running is the right thing to do. Queueing work for a task that is not running is unnecessary (the PQR_ASSOC MSR is already updated when the task is scheduled in) and causing system resource waste with the way in which it is implemented: Work to update the PQR_ASSOC register is queued every time the user writes a task id to the "tasks" file, even if the task already belongs to the resource group. This could result in multiple pending work items associated with a single task even if they are all identical and even though only a single update with most recent values is needed. Specifically, even if a task is moved between different resource groups while it is sleeping then it is only the last move that is relevant but yet a work item is queued during each move. This unnecessary queueing of work items could result in significant system resource waste, especially on tasks sleeping for a long time. For example, as demonstrated by Shakeel Butt in [1] writing the same task id to the "tasks" file can quickly consume significant memory. The same problem (wasted system resources) occurs when moving a task between different resource groups. As pointed out by Valentin Schneider in [2] there is an additional issue with the way in which the queueing of work is done in that the task_struct update is currently done after the work is queued, resulting in a race with the register update possibly done before the data needed by the update is available. To solve these issues, update the PQR_ASSOC MSR in a synchronous way right after the new closid and rmid are ready during the task movement, only if the task is running. If a moved task is not running nothing is done since the PQR_ASSOC MSR will be updated next time the task is scheduled. This is the same way used to update the register when tasks are moved as part of resource group removal. [1] https://lore.kernel.org/lkml/CALvZod7E9zzHwenzf7objzGKsdBmVwTgEJ0nPgs0LUFU3SN5Pw@mail.gmail.com/ [2] https://lore.kernel.org/lkml/20201123022433.17905-1-valentin.schneider@arm.com [ bp: Massage commit message and drop the two update_task_closid_rmid() variants. ] Backporting notes: Since upstream commit fa7d949337cc ("x86/resctrl: Rename and move rdt files to a separate directory"), the file arch/x86/kernel/cpu/intel_rdt_rdtgroup.c has been renamed and moved to arch/x86/kernel/cpu/resctrl/rdtgroup.c. Apply the change against file arch/x86/kernel/cpu/intel_rdt_rdtgroup.c for older stable trees. Since upstream commit 352940ececaca ("x86/resctrl: Rename the RDT functions and definitions"), resctrl functions received more generic names. Specifically related to this backport, intel_rdt_sched_in() was renamed to rescrl_sched_in(). Fixes: e02737d5b826 ("x86/intel_rdt: Add tasks files") Reported-by: Shakeel Butt Reported-by: Valentin Schneider Signed-off-by: Fenghua Yu Signed-off-by: Reinette Chatre Signed-off-by: Borislav Petkov Reviewed-by: Tony Luck Reviewed-by: James Morse Reviewed-by: Valentin Schneider Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/17aa2fb38fc12ce7bb710106b3e7c7b45acb9e94.1608243147.git.reinette.chatre@intel.com Signed-off-by: Greg Kroah-Hartman

KVM: x86: fix shift out of bounds reported by UBSAN

2021-01-12T19:10:24Z

commit 2f80d502d627f30257ba7e3655e71c373b7d1a5a upstream. Since we know that e >= s, we can reassociate the left shift, changing the shifted number from 1 to 2 in exchange for decreasing the right hand side by 1. Reported-by: syzbot+e87846c48bf72bc85311@syzkaller.appspotmail.com Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman

x86/mtrr: Correct the range check before performing MTRR type lookups

2021-01-12T19:10:24Z

commit cb7f4a8b1fb426a175d1708f05581939c61329d4 upstream. In mtrr_type_lookup(), if the input memory address region is not in the MTRR, over 4GB, and not over the top of memory, a write-back attribute is returned. These condition checks are for ensuring the input memory address region is actually mapped to the physical memory. However, if the end address is just aligned with the top of memory, the condition check treats the address is over the top of memory, and write-back attribute is not returned. And this hits in a real use case with NVDIMM: the nd_pmem module tries to map NVDIMMs as cacheable memories when NVDIMMs are connected. If a NVDIMM is the last of the DIMMs, the performance of this NVDIMM becomes very low since it is aligned with the top of memory and its memory type is uncached-minus. Move the input end address change to inclusive up into mtrr_type_lookup(), before checking for the top of memory in either mtrr_type_lookup_{variable,fixed}() helpers. [ bp: Massage commit message. ] Fixes: 0cc705f56e40 ("x86/mm/mtrr: Clean up mtrr_type_lookup()") Signed-off-by: Ying-Tsun Huang Signed-off-by: Borislav Petkov Link: https://lkml.kernel.org/r/20201215070721.4349-1-ying-tsun.huang@amd.com Signed-off-by: Greg Kroah-Hartman

xen/pvh: correctly setup the PV EFI interface for dom0

2021-01-12T19:10:24Z

commit 72813bfbf0276a97c82af038efb5f02dcdd9e310 upstream. This involves initializing the boot params EFI related fields and the efi global variable. Without this fix a PVH dom0 doesn't detect when booted from EFI, and thus doesn't support accessing any of the EFI related data. Reported-by: PGNet Dev Signed-off-by: Roger Pau Monné Reviewed-by: Boris Ostrovsky Signed-off-by: Boris Ostrovsky Cc: Jinoh Kang Cc: stable@vger.kernel.org # 4.19+ Signed-off-by: Greg Kroah-Hartman

x86/mm: Fix leak of pmd ptlock

2021-01-12T19:10:23Z

commit d1c5246e08eb64991001d97a3bd119c93edbc79a upstream. Commit 28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces") introduced a new location where a pmd was released, but neglected to run the pmd page destructor. In fact, this happened previously for a different pmd release path and was fixed by commit: c283610e44ec ("x86, mm: do not leak page->ptl for pmd page tables"). This issue was hidden until recently because the failure mode is silent, but commit: b2b29d6d0119 ("mm: account PMD tables like PTE tables") turns the failure mode into this signature: BUG: Bad page state in process lt-pmem-ns pfn:15943d page:000000007262ed7b refcount:0 mapcount:-1024 mapping:0000000000000000 index:0x0 pfn:0x15943d flags: 0xaffff800000000() raw: 00affff800000000 dead000000000100 0000000000000000 0000000000000000 raw: 0000000000000000 ffff913a029bcc08 00000000fffffbff 0000000000000000 page dumped because: nonzero mapcount [..] dump_stack+0x8b/0xb0 bad_page.cold+0x63/0x94 free_pcp_prepare+0x224/0x270 free_unref_page+0x18/0xd0 pud_free_pmd_page+0x146/0x160 ioremap_pud_range+0xe3/0x350 ioremap_page_range+0x108/0x160 __ioremap_caller.constprop.0+0x174/0x2b0 ? memremap+0x7a/0x110 memremap+0x7a/0x110 devm_memremap+0x53/0xa0 pmem_attach_disk+0x4ed/0x530 [nd_pmem] ? __devm_release_region+0x52/0x80 nvdimm_bus_probe+0x85/0x210 [libnvdimm] Given this is a repeat occurrence it seemed prudent to look for other places where this destructor might be missing and whether a better helper is needed. try_to_free_pmd_page() looks like a candidate, but testing with setting up and tearing down pmd mappings via the dax unit tests is thus far not triggering the failure. As for a better helper pmd_free() is close, but it is a messy fit due to requiring an @mm arg. Also, ___pmd_free_tlb() wants to call paravirt_tlb_remove_table() instead of free_page(), so open-coded pgtable_pmd_page_dtor() seems the best way forward for now. Debugged together with Matthew Wilcox . Fixes: 28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces") Signed-off-by: Dan Williams Signed-off-by: Borislav Petkov Tested-by: Yi Zhang Acked-by: Peter Zijlstra (Intel) Cc: Link: https://lkml.kernel.org/r/160697689204.605323.17629854984697045602.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Greg Kroah-Hartman

powerpc: sysdev: add missing iounmap() on error in mpic_msgr_probe()

2021-01-06T13:45:01Z

[ Upstream commit ffa1797040c5da391859a9556be7b735acbe1242 ] I noticed that iounmap() of msgr_block_addr before return from mpic_msgr_probe() in the error handling case is missing. So use devm_ioremap() instead of just ioremap() when remapping the message register block, so the mapping will be automatically released on probe failure. Signed-off-by: Qinglang Miao Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20201028091551.136400-1-miaoqinglang@huawei.com Signed-off-by: Sasha Levin

powerpc/bitops: Fix possible undefined behaviour with fls() and fls64()

2021-01-06T13:44:59Z

[ Upstream commit 1891ef21d92c4801ea082ee8ed478e304ddc6749 ] fls() and fls64() are using __builtin_ctz() and _builtin_ctzll(). On powerpc, those builtins trivially use ctlzw and ctlzd power instructions. Allthough those instructions provide the expected result with input argument 0, __builtin_ctz() and __builtin_ctzll() are documented as undefined for value 0. The easiest fix would be to use fls() and fls64() functions defined in include/asm-generic/bitops/builtin-fls.h and include/asm-generic/bitops/fls64.h, but GCC output is not optimal: 00000388 : 388: 2c 03 00 00 cmpwi r3,0 38c: 41 82 00 10 beq 39c 390: 7c 63 00 34 cntlzw r3,r3 394: 20 63 00 20 subfic r3,r3,32 398: 4e 80 00 20 blr 39c: 38 60 00 00 li r3,0 3a0: 4e 80 00 20 blr 000003b0 : 3b0: 2c 03 00 00 cmpwi r3,0 3b4: 40 82 00 1c bne 3d0 3b8: 2f 84 00 00 cmpwi cr7,r4,0 3bc: 38 60 00 00 li r3,0 3c0: 4d 9e 00 20 beqlr cr7 3c4: 7c 83 00 34 cntlzw r3,r4 3c8: 20 63 00 20 subfic r3,r3,32 3cc: 4e 80 00 20 blr 3d0: 7c 63 00 34 cntlzw r3,r3 3d4: 20 63 00 40 subfic r3,r3,64 3d8: 4e 80 00 20 blr When the input of fls(x) is a constant, just check x for nullity and return either 0 or __builtin_clz(x). Otherwise, use cntlzw instruction directly. For fls64() on PPC64, do the same but with __builtin_clzll() and cntlzd instruction. On PPC32, lets take the generic fls64() which will use our fls(). The result is as expected: 00000388 : 388: 7c 63 00 34 cntlzw r3,r3 38c: 20 63 00 20 subfic r3,r3,32 390: 4e 80 00 20 blr 000003a0 : 3a0: 2c 03 00 00 cmpwi r3,0 3a4: 40 82 00 10 bne 3b4 3a8: 7c 83 00 34 cntlzw r3,r4 3ac: 20 63 00 20 subfic r3,r3,32 3b0: 4e 80 00 20 blr 3b4: 7c 63 00 34 cntlzw r3,r3 3b8: 20 63 00 40 subfic r3,r3,64 3bc: 4e 80 00 20 blr Fixes: 2fcff790dcb4 ("powerpc: Use builtin functions for fls()/__fls()/fls64()") Cc: stable@vger.kernel.org Signed-off-by: Christophe Leroy Acked-by: Segher Boessenkool Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/348c2d3f19ffcff8abe50d52513f989c4581d000.1603375524.git.christophe.leroy@csgroup.eu Signed-off-by: Sasha Levin