user/sven/linux.git/block/blk-sysfs.c, branch v3.0.9

block: Free queue resources at blk_release_queue()

2011-10-03T18:41:13Z

commit 777eb1bf15b8532c396821774bf6451e563438f5 upstream. A kernel crash is observed when a mounted ext3/ext4 filesystem is physically removed. The problem is that blk_cleanup_queue() frees up some resources eg by calling elevator_exit(), which are not checked for in normal operation. So we should rather move these calls to the destructor function blk_release_queue() as at that point all remaining references are gone. However, in doing so we have to ensure that any externally supplied queue_lock is disconnected as the driver might free up the lock after the call of blk_cleanup_queue(), Signed-off-by: Hannes Reinecke Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

Merge commit 'v2.6.39' into for-2.6.40/core

2011-05-20T18:33:15Z

Since for-2.6.40/core was forked off the 2.6.39 devel tree, we've had churn in the core area that makes it difficult to handle patches for eg cfq or blk-throttle. Instead of requiring that they be based in older versions with bugs that have been fixed later in the rc cycle, merge in 2.6.39 final. Also fixes up conflicts in the below files. Conflicts: drivers/block/paride/pcd.c drivers/cdrom/viocd.c drivers/ide/ide-cd.c Signed-off-by: Jens Axboe

block: Fix discard topology stacking and reporting

2011-05-18T08:37:35Z

In some cases we would end up stacking discard_zeroes_data incorrectly. Fix this by enabling the feature by default for stacking drivers and clearing it for low-level drivers. Incorporating a device that does not support dzd will then cause the feature to be disabled in the stacking driver. Also ensure that the maximum discard value does not overflow when exported in sysfs and return 0 in the alignment and dzd fields for devices that don't support discard. Reported-by: Lukas Czerner Signed-off-by: Martin K. Petersen Acked-by: Mike Snitzer Cc: stable@kernel.org Signed-off-by: Jens Axboe

block: Remove the extra check in queue_requests_store

2011-04-19T11:51:53Z

In queue_requests_store, the code looks like if (rl->count[BLK_RW_SYNC] >= q->nr_requests) { blk_set_queue_full(q, BLK_RW_SYNC); } else if (rl->count[BLK_RW_SYNC]+1 <= q->nr_requests) { blk_clear_queue_full(q, BLK_RW_SYNC); wake_up(&rl->wait[BLK_RW_SYNC]); } If we don't satify the situation of "if", we can get that rl->count[BLK_RW_SYNC} < q->nr_quests. It is the same as rl->count[BLK_RW_SYNC]+1 <= q->nr_requests. All the "else" should satisfy the "else if" check so it isn't needed actually. Signed-off-by: Tao Ma Signed-off-by: Jens Axboe

block, blk-sysfs: Fix an err return path in blk_register_queue()

2011-04-19T11:51:53Z

We do not call blk_trace_remove_sysfs() in err return path if kobject_add() fails. This path fixes it. Cc: stable@kernel.org Signed-off-by: Liu Yuan Signed-off-by: Jens Axboe

block, blk-sysfs: Use the variable directly instead of a function call

2011-04-13T20:14:54Z

In the function blk_register_queue(), var _dev_ is already assigned by disk_to_dev().So use it directly instead of calling disk_to_dev() again. Signed-off-by: Liu Yuan Modified by me to delete an empty line in the same function while in there anyway. Signed-off-by: Jens Axboe

block: Move blk_throtl_exit() call to blk_cleanup_queue()

2011-03-03T00:06:49Z

Move blk_throtl_exit() in blk_cleanup_queue() as blk_throtl_exit() is written in such a way that it needs queue lock. In blk_release_queue() there is no gurantee that ->queue_lock is still around. Initially blk_throtl_exit() was in blk_cleanup_queue() but Ingo reported one problem. https://lkml.org/lkml/2010/10/23/86 And a quick fix moved blk_throtl_exit() to blk_release_queue(). commit 7ad58c028652753814054f4e3ac58f925e7343f4 Author: Jens Axboe Date: Sat Oct 23 20:40:26 2010 +0200 block: fix use-after-free bug in blk throttle code This patch reverts above change and does not try to shutdown the throtl work in blk_sync_queue(). By avoiding call to throtl_shutdown_timer_wq() from blk_sync_queue(), we should also avoid the problem reported by Ingo. blk_sync_queue() seems to be used only by md driver and it seems to be using it to make sure q->unplug_fn is not called as md registers its own unplug functions and it is about to free up the data structures used by unplug_fn(). Block throttle does not call back into unplug_fn() or into md. So there is no need to cancel blk throttle work. In fact I think cancelling block throttle work is bad because it might happen that some bios are throttled and scheduled to be dispatched later with the help of pending work and if work is cancelled, these bios might never be dispatched. Block layer also uses blk_sync_queue() during blk_cleanup_queue() and blk_release_queue() time. That should be safe as we are also calling blk_throtl_exit() which should make sure all the throttling related data structures are cleaned up. Signed-off-by: Vivek Goyal Signed-off-by: Jens Axboe

block: Deprecate QUEUE_FLAG_CLUSTER and use queue_limits instead

2010-12-17T07:35:53Z

When stacking devices, a request_queue is not always available. This forced us to have a no_cluster flag in the queue_limits that could be used as a carrier until the request_queue had been set up for a metadevice. There were several problems with that approach. First of all it was up to the stacking device to remember to set queue flag after stacking had completed. Also, the queue flag and the queue limits had to be kept in sync at all times. We got that wrong, which could lead to us issuing commands that went beyond the max scatterlist limit set by the driver. The proper fix is to avoid having two flags for tracking the same thing. We deprecate QUEUE_FLAG_CLUSTER and use the queue limit directly in the block layer merging functions. The queue_limit 'no_cluster' is turned into 'cluster' to avoid double negatives and to ease stacking. Clustering defaults to being enabled as before. The queue flag logic is removed from the stacking function, and explicitly setting the cluster flag is no longer necessary in DM and MD. Reported-by: Ed Lin Signed-off-by: Martin K. Petersen Acked-by: Mike Snitzer Cc: stable@kernel.org Signed-off-by: Jens Axboe

block: fix use-after-free bug in blk throttle code

2010-10-23T18:40:26Z

blk_throtl_exit() frees the throttle data hanging off the queue in blk_cleanup_queue(), but blk_put_queue() will indirectly dereference this data when calling blk_sync_queue() which in turns calls throtl_shutdown_timer_wq(). Fix this by moving the freeing of the throttle data to when the queue is truly being released, and post the call to blk_sync_queue(). Reported-by: Ingo Molnar Tested-by: Ingo Molnar Signed-off-by: Jens Axboe

Merge branch 'for-2.6.37/core' of git://git.kernel.dk/linux-2.6-block

2010-10-23T00:00:32Z

* 'for-2.6.37/core' of git://git.kernel.dk/linux-2.6-block: (39 commits) cfq-iosched: Fix a gcc 4.5 warning and put some comments block: Turn bvec_k{un,}map_irq() into static inline functions block: fix accounting bug on cross partition merges block: Make the integrity mapped property a bio flag block: Fix double free in blk_integrity_unregister block: Ensure physical block size is unsigned int blkio-throttle: Fix possible multiplication overflow in iops calculations blkio-throttle: limit max iops value to UINT_MAX blkio-throttle: There is no need to convert jiffies to milli seconds blkio-throttle: Fix link failure failure on i386 blkio: Recalculate the throttled bio dispatch time upon throttle limit change blkio: Add root group to td->tg_list blkio: deletion of a cgroup was causes oops blkio: Do not export throttle files if CONFIG_BLK_DEV_THROTTLING=n block: set the bounce_pfn to the actual DMA limit rather than to max memory block: revert bad fix for memory hotplug causing bounces Fix compile error in blk-exec.c for !CONFIG_DETECT_HUNG_TASK block: set the bounce_pfn to the actual DMA limit rather than to max memory block: Prevent hang_check firing during long I/O cfq: improve fsync performance for small files ... Fix up trivial conflicts due to __rcu sparse annotation in include/linux/genhd.h