user/sven/linux.git/block, branch v4.14.117

block: do not leak memory in bio_copy_user_iov()

2019-04-17T06:37:53Z

commit a3761c3c91209b58b6f33bf69dd8bb8ec0c9d925 upstream. When bio_add_pc_page() fails in bio_copy_user_iov() we should free the page we just allocated otherwise we are leaking it. Cc: linux-block@vger.kernel.org Cc: Linus Torvalds Cc: stable@vger.kernel.org Reviewed-by: Chaitanya Kulkarni Signed-off-by: Jérôme Glisse Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

blk-mq: fix a hung issue when fsync

2019-02-20T09:20:44Z

[ Upstream commit 85bd6e61f34dffa8ec2dc75ff3c02ee7b2f1cbce ] Florian reported a io hung issue when fsync(). It should be triggered by following race condition. data + post flush a flush blk_flush_complete_seq case REQ_FSEQ_DATA blk_flush_queue_rq issued to driver blk_mq_dispatch_rq_list try to issue a flush req failed due to NON-NCQ command .queue_rq return BLK_STS_DEV_RESOURCE request completion req->end_io // doesn't check RESTART mq_flush_data_end_io case REQ_FSEQ_POSTFLUSH blk_kick_flush do nothing because previous flush has not been completed blk_mq_run_hw_queue insert rq to hctx->dispatch due to RESTART is still set, do nothing To fix this, replace the blk_mq_run_hw_queue in mq_flush_data_end_io with blk_mq_sched_restart to check and clear the RESTART flag. Fixes: bd166ef1 (blk-mq-sched: add framework for MQ capable IO schedulers) Reported-by: Florian Stecker Tested-by: Florian Stecker Signed-off-by: Jianchao Wang Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

block: fix infinite loop if the device loses discard capability

2018-12-29T12:39:07Z

[ Upstream commit b88aef36b87c9787a4db724923ec4f57dfd513f3 ] If __blkdev_issue_discard is in progress and a device mapper device is reloaded with a table that doesn't support discard, q->limits.max_discard_sectors is set to zero. This results in infinite loop in __blkdev_issue_discard. This patch checks if max_discard_sectors is zero and aborts with -EOPNOTSUPP. Signed-off-by: Mikulas Patocka Tested-by: Zdenek Kabelac Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

block: break discard submissions into the user defined size

2018-12-29T12:39:07Z

[ Upstream commit af097f5d199e2aa3ab3ef777f0716e487b8f7b08 ] Don't build discards bigger than what the user asked for, if the user decided to limit the size by writing to 'discard_max_bytes'. Reviewed-by: Darrick J. Wong Reviewed-by: Omar Sandoval Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

elevator: lookup mq vs non-mq elevators

2018-12-21T13:13:10Z

[ Upstream commit 2527d99789e248576ac8081530cd4fd88730f8c7 ] If an IO scheduler is selected via elevator= and it doesn't match the driver in question wrt blk-mq support, then we fail to boot. The elevator= parameter is deprecated and only supported for non-mq devices. Augment the elevator lookup API so that we pass in if we're looking for an mq capable scheduler or not, so that we only ever return a valid type for the queue in question. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=196695 Reviewed-by: Omar Sandoval Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

SCSI: fix queue cleanup race before queue initialization is done

2018-11-21T08:24:09Z

commit 8dc765d438f1e42b3e8227b3b09fad7d73f4ec9a upstream. c2856ae2f315d ("blk-mq: quiesce queue before freeing queue") has already fixed this race, however the implied synchronize_rcu() in blk_mq_quiesce_queue() can slow down LUN probe a lot, so caused performance regression. Then 1311326cf4755c7 ("blk-mq: avoid to synchronize rcu inside blk_cleanup_queue()") tried to quiesce queue for avoiding unnecessary synchronize_rcu() only when queue initialization is done, because it is usual to see lots of inexistent LUNs which need to be probed. However, turns out it isn't safe to quiesce queue only when queue initialization is done. Because when one SCSI command is completed, the user of sending command can be waken up immediately, then the scsi device may be removed, meantime the run queue in scsi_end_request() is still in-progress, so kernel panic can be caused. In Red Hat QE lab, there are several reports about this kind of kernel panic triggered during kernel booting. This patch tries to address the issue by grabing one queue usage counter during freeing one request and the following run queue. Fixes: 1311326cf4755c7 ("blk-mq: avoid to synchronize rcu inside blk_cleanup_queue()") Cc: Andrew Jones Cc: Bart Van Assche Cc: linux-scsi@vger.kernel.org Cc: Martin K. Petersen Cc: Christoph Hellwig Cc: James E.J. Bottomley Cc: stable Cc: jianchao.wang Signed-off-by: Ming Lei Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

block, bfq: correctly charge and reset entity service in all cases

2018-11-13T19:14:55Z

[ Upstream commit cbeb869a3d1110450186b738199963c5e68c2a71 ] BFQ schedules entities (which represent either per-process queues or groups of queues) as a function of their timestamps. In particular, as a function of their (virtual) finish times. The finish time of an entity is computed as a function of the budget assigned to the entity, assuming, tentatively, that the entity, once in service, will receive an amount of service equal to its budget. Then, when the entity is expired because it finishes to be served, this finish time is updated as a function of the actual service received by the entity. This allows the entity to be correctly charged with only the service received, and then to be correctly re-scheduled. Yet an entity may receive service also while not being the entity in service (in the scheduling environment of its parent entity), for several reasons. If the entity remains with no backlog while receiving this 'unofficial' service, then it is expired. Also on such an expiration, the finish time of the entity should be updated to account for only the service actually received by the entity. Unfortunately, such an update is not performed for an entity expiring without being the entity in service. In a similar vein, the service counter of the entity in service is reset when the entity is expired, to be ready to be used for next service cycle. This reset too should be performed also in case an entity is expired because it remains empty after receiving service while not being the entity in service. But in this case the reset is not performed. This commit performs the above update of the finish time and reset of the service received, also for an entity expiring while not being the entity in service. Signed-off-by: Paolo Valente Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

blk-mq: I/O and timer unplugs are inverted in blktrace

2018-10-13T07:27:22Z

commit 587562d0c7cd6861f4f90a2eb811cccb1a376f5f upstream. trace_block_unplug() takes true for explicit unplugs and false for implicit unplugs. schedule() unplugs are implicit and should be reported as timer unplugs. While correct in the legacy code, this has been inverted in blk-mq since 4.11. Cc: stable@vger.kernel.org Fixes: bd166ef183c2 ("blk-mq-sched: add framework for MQ capable IO schedulers") Reviewed-by: Omar Sandoval Signed-off-by: Ilya Dryomov Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

blk-mq: avoid to synchronize rcu inside blk_cleanup_queue()

2018-09-26T06:38:13Z

[ Upstream commit 1311326cf4755c7ffefd20f576144ecf46d9906b ] SCSI probing may synchronously create and destroy a lot of request_queues for non-existent devices. Any synchronize_rcu() in queue creation or destroy path may introduce long latency during booting, see detailed description in comment of blk_register_queue(). This patch removes one synchronize_rcu() inside blk_cleanup_queue() for this case, commit c2856ae2f315d75(blk-mq: quiesce queue before freeing queue) needs synchronize_rcu() for implementing blk_mq_quiesce_queue(), but when queue isn't initialized, it isn't necessary to do that since only pass-through requests are involved, no original issue in scsi_execute() at all. Without this patch and previous one, it may take more 20+ seconds for virtio-scsi to complete disk probe. With the two patches, the time becomes less than 100ms. Fixes: c2856ae2f315d75 ("blk-mq: quiesce queue before freeing queue") Reported-by: Andrew Jones Cc: Omar Sandoval Cc: Bart Van Assche Cc: linux-scsi@vger.kernel.org Cc: "Martin K. Petersen" Cc: Christoph Hellwig Tested-by: Andrew Jones Signed-off-by: Ming Lei Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

blk-mq: only attempt to merge bio if there is rq in sw queue

2018-09-26T06:38:13Z

[ Upstream commit b04f50ab8a74129b3041a2836c33c916be3c6667 ] Only attempt to merge bio iff the ctx->rq_list isn't empty, because: 1) for high-performance SSD, most of times dispatch may succeed, then there may be nothing left in ctx->rq_list, so don't try to merge over sw queue if it is empty, then we can save one acquiring of ctx->lock 2) we can't expect good merge performance on per-cpu sw queue, and missing one merge on sw queue won't be a big deal since tasks can be scheduled from one CPU to another. Cc: Laurence Oberman Cc: Omar Sandoval Cc: Bart Van Assche Tested-by: Kashyap Desai Reported-by: Kashyap Desai Reviewed-by: Christoph Hellwig Signed-off-by: Ming Lei Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman