user/sven/linux.git/crypto/async_tx, branch v5.15.157

async_xor: check src_offs is not NULL before updating it

2021-06-11T02:40:14Z

When PAGE_SIZE is greater than 4kB, multiple stripes may share the same page. Thus, src_offs is added to async_xor_offs() with array of offsets. However, async_xor() passes NULL src_offs to async_xor_offs(). In such case, src_offs should not be updated. Add a check before the update. Fixes: ceaf2966ab08(async_xor: increase src_offs when dropping destination page) Cc: stable@vger.kernel.org # v5.10+ Reported-by: Oleksandr Shchirskyi Tested-by: Oleksandr Shchirskyi Signed-off-by: Xiao Ni Signed-off-by: Song Liu

async_xor: increase src_offs when dropping destination page

2021-04-26T17:06:12Z

Now we support sharing one page if PAGE_SIZE is not equal stripe size. To support this, it needs to support calculating xor value with different offsets for each r5dev. One offset array is used to record those offsets. In RMW mode, parity page is used as a source page. It sets ASYNC_TX_XOR_DROP_DST before calculating xor value in ops_run_prexor5. So it needs to add src_list and src_offs at the same time. Now it only needs src_list. So the xor value which is calculated is wrong. It can cause data corruption problem. I can reproduce this problem 100% on a POWER8 machine. The steps are: mdadm -CR /dev/md0 -l5 -n3 /dev/sdb1 /dev/sdc1 /dev/sdd1 --size=3G mkfs.xfs /dev/md0 mount /dev/md0 /mnt/test mount: /mnt/test: mount(2) system call failed: Structure needs cleaning. Fixes: 29bcff787a25 ("md/raid5: add new xor function to support different page offset") Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Xiao Ni Signed-off-by: Song Liu

md/raid6: let async recovery function support different page offset

2020-09-24T23:44:44Z

For now, asynchronous raid6 recovery calculate functions are require common offset for pages. But, we expect them to support different page offset after introducing stripe shared page. Do that by simplily adding page offset where each page address are referred. Then, replace the old interface with the new ones in raid6 and raid6test. Signed-off-by: Yufen Yu Signed-off-by: Song Liu

md/raid6: let syndrome computor support different page offset

2020-09-24T23:44:44Z

For now, syndrome compute functions require common offset in the pages array. However, we expect them to support different offset when try to use shared page in the following. Simplily covert them by adding page offset where each page address are referred. Since the only caller of async_gen_syndrome() and async_syndrome_val() are in raid6, we don't want to reserve the old interface but modify the interface directly. After that, replacing old interfaces with new ones for raid6 and raid6test. Signed-off-by: Yufen Yu Signed-off-by: Song Liu

md/raid5: add new xor function to support different page offset

2020-09-24T23:44:44Z

raid5 will call async_xor() and async_xor_val() to compute xor. For now, both of them require the common src/dst page offset. But, we want them to support different src/dst page offset for following shared page. Here, adding two new function async_xor_offs() and async_xor_val_offs() respectively for async_xor() and async_xor_val(). Signed-off-by: Yufen Yu Signed-off-by: Song Liu

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 335

2019-06-05T15:37:06Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin st fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 111 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Alexios Zavras Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.567572064@linutronix.de Signed-off-by: Greg Kroah-Hartman

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 102

2019-05-24T15:39:00Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin st fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 50 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Kate Stewart Reviewed-by: Allison Randal Reviewed-by: Richard Fontana Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190523091649.499889647@linutronix.de Signed-off-by: Greg Kroah-Hartman

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 33

2019-05-24T15:27:11Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa the full gnu general public license is included in this distribution in the file called copying extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 7 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Richard Fontana Reviewed-by: Kate Stewart Reviewed-by: Michael Ellerman (powerpc) Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190520170857.277062491@linutronix.de Signed-off-by: Greg Kroah-Hartman

async_pq: Remove VLA usage

2018-06-18T14:47:38Z

In the quest to remove VLAs from the kernel[1], this adjusts the allocation of coefs and blocks to use the existing maximum values (with one new define, MAX_DISKS for coefs, and a reuse of the existing NDISKS for blocks). [1] https://lkml.org/lkml/2018/3/7/621 Signed-off-by: Kyle Spiers Reviewed-by: Kees Cook Reviewed-by: Dan Williams Signed-off-by: Vinod Koul

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman