user/sven/linux.git/drivers/acpi/processor_idle.c, branch v4.14.235

Revert "x86/mm: Stop calling leave_mm() in idle code"

2017-11-04T14:01:50Z

This reverts commit 43858b4f25cf0adc5c2ca9cf5ce5fdf2532941e5. The reason I removed the leave_mm() calls in question is because the heuristic wasn't needed after that patch. With the original version of my PCID series, we never flushed a "lazy cpu" (i.e. a CPU running kernel thread) due a flush on the loaded mm. Unfortunately, that caused architectural issues, so now I've reinstated these flushes on non-PCID systems in: commit b956575bed91 ("x86/mm: Flush more aggressively in lazy TLB mode"). That, in turn, gives us a power management and occasionally performance regression as compared to old kernels: a process that goes into a deep idle state on a given CPU and gets its mm flushed due to activity on a different CPU will wake the idle CPU. Reinstate the old ugly heuristic: if a CPU goes into ACPI C3 or an intel_idle state that is likely to cause a TLB flush gets its mm switched to init_mm before going idle. FWIW, this heuristic is lousy. Whether we should change CR3 before idle isn't a good hint except insofar as the performance hit is a bit lower if the TLB is getting flushed by the idle code anyway. What we really want to know is whether we anticipate being idle long enough that the mm is likely to be flushed before we wake up. This is more a matter of the expected latency than the idle state that gets chosen. This heuristic also completely fails on systems that don't know whether the TLB will be flushed (e.g. AMD systems?). OTOH it may be a bit obsolete anyway -- PCID systems don't presently benefit from this heuristic at all. We also shouldn't do this callback from innermost bit of the idle code due to the RCU nastiness it causes. All the information need is available before rcu_idle_enter() needs to happen. Signed-off-by: Andy Lutomirski Cc: Borislav Petkov Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Fixes: 43858b4f25cf "x86/mm: Stop calling leave_mm() in idle code" Link: http://lkml.kernel.org/r/c513bbd4e653747213e05bc7062de000bf0202a5.1509793738.git.luto@kernel.org Signed-off-by: Ingo Molnar

Merge tag 'pm-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2017-09-05T19:19:08Z

Pull power management updates from Rafael Wysocki: "This time (again) cpufreq gets the majority of changes which mostly are driver updates (including a major consolidation of intel_pstate), some schedutil governor modifications and core cleanups. There also are some changes in the system suspend area, mostly related to diagnostics and debug messages plus some renames of things related to suspend-to-idle. One major change here is that suspend-to-idle is now going to be preferred over S3 on systems where the ACPI tables indicate to do so and provide requsite support (the Low Power Idle S0 _DSM in particular). The system sleep documentation and the tools related to it are updated too. The rest is a few cpuidle changes (nothing major), devfreq updates, generic power domains (genpd) framework updates and a few assorted modifications elsewhere. Specifics: - Drop the P-state selection algorithm based on a PID controller from intel_pstate and make it use the same P-state selection method (based on the CPU load) for all types of systems in the active mode (Rafael Wysocki, Srinivas Pandruvada). - Rework the cpufreq core and governors to make it possible to take cross-CPU utilization updates into account and modify the schedutil governor to actually do so (Viresh Kumar). - Clean up the handling of transition latency information in the cpufreq core and untangle it from the information on which drivers cannot do dynamic frequency switching (Viresh Kumar). - Add support for new SoCs (MT2701/MT7623 and MT7622) to the mediatek cpufreq driver and update its DT bindings (Sean Wang). - Modify the cpufreq dt-platdev driver to autimatically create cpufreq devices for the new (v2) Operating Performance Points (OPP) DT bindings and update its whitelist of supported systems (Viresh Kumar, Shubhrajyoti Datta, Marc Gonzalez, Khiem Nguyen, Finley Xiao). - Add support for Ux500 to the cpufreq-dt driver and drop the obsolete dbx500 cpufreq driver (Linus Walleij, Arnd Bergmann). - Add new SoC (R8A7795) support to the cpufreq rcar driver (Khiem Nguyen). - Fix and clean up assorted issues in the cpufreq drivers and core (Arvind Yadav, Christophe Jaillet, Colin Ian King, Gustavo Silva, Julia Lawall, Leonard Crestez, Rob Herring, Sudeep Holla). - Update the IO-wait boost handling in the schedutil governor to make it less aggressive (Joel Fernandes). - Rework system suspend diagnostics to make it print fewer messages to the kernel log by default, add a sysfs knob to allow more suspend-related messages to be printed and add Low Power S0 Idle constraints checks to the ACPI suspend-to-idle code (Rafael Wysocki, Srinivas Pandruvada). - Prefer suspend-to-idle over S3 on ACPI-based systems with the ACPI_FADT_LOW_POWER_S0 flag set and the Low Power Idle S0 _DSM interface present in the ACPI tables (Rafael Wysocki). - Update documentation related to system sleep and rename a number of items in the code to make it cleare that they are related to suspend-to-idle (Rafael Wysocki). - Export a variable allowing device drivers to check the target system sleep state from the core system suspend code (Florian Fainelli). - Clean up the cpuidle subsystem to handle the polling state on x86 in a more straightforward way and to use %pOF instead of full_name (Rafael Wysocki, Rob Herring). - Update the devfreq framework to fix and clean up a few minor issues (Chanwoo Choi, Rob Herring). - Extend diagnostics in the generic power domains (genpd) framework and clean it up slightly (Thara Gopinath, Rob Herring). - Fix and clean up a couple of issues in the operating performance points (OPP) framework (Viresh Kumar, Waldemar Rymarkiewicz). - Add support for RV1108 to the rockchip-io Adaptive Voltage Scaling (AVS) driver (David Wu). - Fix the usage of notifiers in CPU power management on some platforms (Alex Shi). - Update the pm-graph system suspend/hibernation and boot profiling utility (Todd Brandt). - Make it possible to run the cpupower utility without CPU0 (Prarit Bhargava)" * tag 'pm-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (87 commits) cpuidle: Make drivers initialize polling state cpuidle: Move polling state initialization code to separate file cpuidle: Eliminate the CPUIDLE_DRIVER_STATE_START symbol cpufreq: imx6q: Fix imx6sx low frequency support cpufreq: speedstep-lib: make several arrays static, makes code smaller PM: docs: Delete the obsolete states.txt document PM: docs: Describe high-level PM strategies and sleep states PM / devfreq: Fix memory leak when fail to register device PM / devfreq: Add dependency on PM_OPP PM / devfreq: Move private devfreq_update_stats() into devfreq PM / devfreq: Convert to using %pOF instead of full_name PM / AVS: rockchip-io: add io selectors and supplies for RV1108 cpufreq: ti: Fix 'of_node_put' being called twice in error handling path cpufreq: dt-platdev: Drop few entries from whitelist cpufreq: dt-platdev: Automatically create cpufreq device with OPP v2 ARM: ux500: don't select CPUFREQ_DT cpuidle: Convert to using %pOF instead of full_name cpufreq: Convert to using %pOF instead of full_name PM / Domains: Convert to using %pOF instead of full_name cpufreq: Cap the default transition delay value to 10 ms ...

Merge branch 'pm-sleep'

2017-09-03T22:06:02Z

* pm-sleep: ACPI / PM: Check low power idle constraints for debug only PM / s2idle: Rename platform operations structure PM / s2idle: Rename ->enter_freeze to ->enter_s2idle PM / s2idle: Rename freeze_state enum and related items PM / s2idle: Rename PM_SUSPEND_FREEZE to PM_SUSPEND_TO_IDLE ACPI / PM: Prefer suspend-to-idle over S3 on some systems platform/x86: intel-hid: Wake up Dell Latitude 7275 from suspend-to-idle PM / suspend: Define pr_fmt() in suspend.c PM / suspend: Use mem_sleep_labels[] strings in messages PM / sleep: Put pm_test under CONFIG_PM_SLEEP_DEBUG PM / sleep: Check pm_wakeup_pending() in __device_suspend_noirq() PM / core: Add error argument to dpm_show_time() PM / core: Split dpm_suspend_noirq() and dpm_resume_noirq() PM / s2idle: Rearrange the main suspend-to-idle loop PM / timekeeping: Print debug messages when requested PM / sleep: Mark suspend/hibernation start and finish PM / sleep: Do not print debug messages by default PM / suspend: Export pm_suspend_target_state

cpuidle: Make drivers initialize polling state

2017-08-30T01:06:33Z

Make the drivers that want to include the polling state into their states table initialize it explicitly and drop the initialization of it (which in fact is conditional, but that is not obvious from the code) from the core. Signed-off-by: Rafael J. Wysocki Tested-by: Sudeep Holla Acked-by: Daniel Lezcano

cpuidle: Eliminate the CPUIDLE_DRIVER_STATE_START symbol

2017-08-30T01:05:29Z

On some architectures the first (index 0) idle state is a polling one and it doesn't really save energy, so there is the CPUIDLE_DRIVER_STATE_START symbol allowing some pieces of cpuidle code to avoid using that state. However, this makes the code rather hard to follow. It is better to explicitly avoid the polling state, so add a new cpuidle state flag CPUIDLE_FLAG_POLLING to mark it and make the relevant code check that flag for the first state instead of using the CPUIDLE_DRIVER_STATE_START symbol. In the ACPI processor driver that cannot always rely on the state flags (like before the states table has been set up) define a new internal symbol ACPI_IDLE_STATE_START equivalent to the CPUIDLE_DRIVER_STATE_START one and drop the latter. Signed-off-by: Rafael J. Wysocki Tested-by: Sudeep Holla Acked-by: Daniel Lezcano

PM / s2idle: Rename ->enter_freeze to ->enter_s2idle

2017-08-10T23:29:56Z

Rename the ->enter_freeze cpuidle driver callback to ->enter_s2idle to make it clear that it is used for entering suspend-to-idle and rename the related functions, variables and so on accordingly. Signed-off-by: Rafael J. Wysocki

x86/mm: Stop calling leave_mm() in idle code

2017-07-05T08:52:57Z

Now that lazy TLB suppresses all flush IPIs (as opposed to all but the first), there's no need to leave_mm() when going idle. This means we can get rid of the rcuidle hack in switch_mm_irqs_off() and we can unexport leave_mm(). This also removes acpi_unlazy_tlb() from the x86 and ia64 headers, since it has no callers any more. Signed-off-by: Andy Lutomirski Reviewed-by: Nadav Amit Reviewed-by: Borislav Petkov Reviewed-by: Thomas Gleixner Cc: Andrew Morton Cc: Arjan van de Ven Cc: Borislav Petkov Cc: Dave Hansen Cc: Linus Torvalds Cc: Mel Gorman Cc: Peter Zijlstra Cc: Rik van Riel Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/03c699cfd6021e467be650d6b73deaccfe4b4bd7.1498751203.git.luto@kernel.org Signed-off-by: Ingo Molnar

x86/amd: Simplify AMD E400 aware idle routine

2016-12-09T20:23:21Z

Reorganize the E400 detection now that we have everything in place: switch the CPUs to broadcast mode after the LAPIC has been initialized and remove the facilities that were used previously on the idle path. Unfortunately static_cpu_has_bug() cannpt be used in the E400 idle routine because alternatives have been applied when the actual detection happens, so the static switching does not take effect and the test will stay false. Use boot_cpu_has_bug() instead which is definitely an improvement over the RDMSR and the cpumask handling. Suggested-by: Thomas Gleixner Signed-off-by: Borislav Petkov Cc: Jiri Olsa Link: http://lkml.kernel.org/r/20161209182912.2726-5-bp@alien8.de Signed-off-by: Thomas Gleixner

nmi_backtrace: generate one-line reports for idle cpus

2016-10-08T01:46:30Z

When doing an nmi backtrace of many cores, most of which are idle, the output is a little overwhelming and very uninformative. Suppress messages for cpus that are idling when they are interrupted and just emit one line, "NMI backtrace for N skipped: idling at pc 0xNNN". We do this by grouping all the cpuidle code together into a new .cpuidle.text section, and then checking the address of the interrupted PC to see if it lies within that section. This commit suitably tags x86 and tile idle routines, and only adds in the minimal framework for other architectures. Link: http://lkml.kernel.org/r/1472487169-14923-5-git-send-email-cmetcalf@mellanox.com Signed-off-by: Chris Metcalf Acked-by: Peter Zijlstra (Intel) Tested-by: Peter Zijlstra (Intel) Tested-by: Daniel Thompson [arm] Tested-by: Petr Mladek Cc: Aaron Tomlin Cc: Peter Zijlstra (Intel) Cc: "Rafael J. Wysocki" Cc: Russell King Cc: Thomas Gleixner Cc: Ingo Molnar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

ACPI / processor_idle: Add support for Low Power Idle(LPI) states

2016-07-21T21:25:58Z

ACPI 6.0 introduced an optional object _LPI that provides an alternate method to describe Low Power Idle states. It defines the local power states for each node in a hierarchical processor topology. The OSPM can use _LPI object to select a local power state for each level of processor hierarchy in the system. They used to produce a composite power state request that is presented to the platform by the OSPM. Since multiple processors affect the idle state for any non-leaf hierarchy node, coordination of idle state requests between the processors is required. ACPI supports two different coordination schemes: Platform coordinated and OS initiated. This patch adds initial support for Platform coordination scheme of LPI. Signed-off-by: Sudeep Holla Signed-off-by: Rafael J. Wysocki