user/sven/linux.git/drivers/acpi/processor_idle.c, branch v5.5.11

ACPI: processor_idle: Skip dummy wait if kernel is in guest

2019-10-25T08:33:20Z

In function acpi_idle_do_entry(), an ioport access is used for dummy wait to guarantee hardware behavior. But it could trigger unnecessary VMexit if kernel is running as guest in virtualization environment. If it's in virtualization environment, the deeper C state enter operation (inb()) will trap to hypervisor. It's not needed to do dummy wait after the inb() call. So we could just remove the dummy io port access to avoid unnecessary VMexit. And keep dummy io port access to maintain timing for native environment. Signed-off-by: Yin Fengwei Signed-off-by: Rafael J. Wysocki

ACPI, x86: Add Zhaoxin processors support for NONSTOP TSC

2019-06-22T09:45:57Z

Zhaoxin CPUs have NONSTOP TSC feature, so enable the ACPI driver support for it. Signed-off-by: Tony W Wang-oc Signed-off-by: Thomas Gleixner Cc: "hpa@zytor.com" Cc: "gregkh@linuxfoundation.org" Cc: "rjw@rjwysocki.net" Cc: "lenb@kernel.org" Cc: David Wang Cc: "Cooper Yan(BJ-RD)" Cc: "Qiyuan Wang(BJ-RD)" Cc: "Herry Yang(BJ-RD)" Link: https://lkml.kernel.org/r/d1cfd937dabc44518d42038b55522c53@zhaoxin.com

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157

2019-05-30T18:26:37Z

Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Richard Fontana Reviewed-by: Kate Stewart Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman

ACPI / processor: Set P_LVL{2,3} idle state descriptions

2019-02-18T10:29:13Z

The ACPI idle driver will fallback to using the legacy P_LVL* SystemIO method of entering C-states if the _CST method is disabled and P_BLK is defined. However, in this case the C2 and C3 states won't have a description set, so the user will see "" when reading the description from sysfs. Give each of these states a description. Signed-off-by: Yazen Ghannam Signed-off-by: Rafael J. Wysocki

ACPI: Add Hygon Dhyana support

2018-09-27T16:29:00Z

The Hygon Dhyana CPU has NONSTOP TSC feature, so enable the ACPI driver support to it. Signed-off-by: Pu Wen Signed-off-by: Borislav Petkov Acked-by: Rafael J. Wysocki Cc: rjw@rjwysocki.net Cc: tglx@linutronix.de Cc: mingo@redhat.com Cc: hpa@zytor.com Cc: x86@kernel.org Cc: thomas.lendacky@amd.com Cc: lenb@kernel.org Cc: rafael@kernel.org Cc: linux-acpi@vger.kernel.org Link: https://lkml.kernel.org/r/cce6ee26f4e2ebbab493433264d89d7cea661284.1537533369.git.puwen@hygon.cn

Merge tag 'acpi-part2-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2018-02-09T17:44:25Z

Pull more ACPI updates from Rafael Wysocki: "These are mostly fixes and cleanups, a few new quirks, a couple of updates related to the handling of ACPI tables and ACPICA copyrights refreshment. Specifics: - Update the ACPICA kernel code to upstream revision 20180105 including: * Assorted fixes (Jung-uk Kim) * Support for X32 ABI compilation (Anuj Mittal) * Update of ACPICA copyrights to 2018 (Bob Moore) - Prepare for future modifications to avoid executing the _STA control method too early (Hans de Goede) - Make the processor performance control library code ignore _PPC notifications if they cannot be handled and fix up the C1 idle state definition when it is used as a fallback state (Chen Yu, Yazen Ghannam) - Make it possible to use the SPCR table on x86 and to replace the original IORT table with a new one from initrd (Prarit Bhargava, Shunyong Yang) - Add battery-related quirks for Asus UX360UA and UX410UAK and add quirks for table parsing on Dell XPS 9570 and Precision M5530 (Kai Heng Feng) - Address static checker warnings in the CPPC code (Gustavo Silva) - Avoid printing a raw pointer to the kernel log in the smart battery driver (Greg Kroah-Hartman)" * tag 'acpi-part2-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: sbshc: remove raw pointer from printk() message ACPI: SPCR: Make SPCR available to x86 ACPI / CPPC: Use 64-bit arithmetic instead of 32-bit ACPI / tables: Add IORT to injectable table list ACPI / bus: Parse tables as term_list for Dell XPS 9570 and Precision M5530 ACPICA: Update version to 20180105 ACPICA: All acpica: Update copyrights to 2018 ACPI / processor: Set default C1 idle state description ACPI / battery: Add quirk for Asus UX360UA and UX410UAK ACPI: processor_perflib: Do not send _PPC change notification if not ready ACPI / scan: Use acpi_bus_get_status() to initialize ACPI_TYPE_DEVICE devs ACPI / bus: Do not call _STA on battery devices with unmet dependencies PCI: acpiphp_ibm: prepare for acpi_get_object_info() no longer returning status ACPI: export acpi_bus_get_status_handle() ACPICA: Add a missing pair of parentheses ACPICA: Prefer ACPI_TO_POINTER() over ACPI_ADD_PTR() ACPICA: Avoid NULL pointer arithmetic ACPICA: Linux: add support for X32 ABI compilation ACPI / video: Use true for boolean value

ACPI / processor: Set default C1 idle state description

2018-02-04T08:21:44Z

The ACPI idle driver will default to ACPI_CSTATE_HALT for C1 if a _CST object for C1 is not defined. However, the description will not be set, so users will see "" when reading the description from sysfs. Set the C1 state description when defaulting to ACPI_CSTATE_HALT. Signed-off-by: Yazen Ghannam Signed-off-by: Rafael J. Wysocki

x86/centaur: Mark TSC invariant

2018-01-24T12:38:10Z

Centaur CPU has a constant frequency TSC and that TSC does not stop in C-States. But because the corresponding TSC feature flags are not set for that CPU, the TSC is treated as not constant frequency and assumed to stop in C-States, which makes it an unreliable and unusable clock source. Setting those flags tells the kernel that the TSC is usable, so it will select it over HPET. The effect of this is that reading time stamps (from kernel or user space) will be faster and more efficent. Signed-off-by: davidwang Signed-off-by: Thomas Gleixner Cc: qiyuanwang@zhaoxin.com Cc: linux-pm@vger.kernel.org Cc: brucechang@via-alliance.com Cc: cooperyan@zhaoxin.com Cc: benjaminpan@viatech.com Link: https://lkml.kernel.org/r/1516616057-5158-1-git-send-email-davidwang@zhaoxin.com

Revert "x86/mm: Stop calling leave_mm() in idle code"

2017-11-04T14:01:50Z

This reverts commit 43858b4f25cf0adc5c2ca9cf5ce5fdf2532941e5. The reason I removed the leave_mm() calls in question is because the heuristic wasn't needed after that patch. With the original version of my PCID series, we never flushed a "lazy cpu" (i.e. a CPU running kernel thread) due a flush on the loaded mm. Unfortunately, that caused architectural issues, so now I've reinstated these flushes on non-PCID systems in: commit b956575bed91 ("x86/mm: Flush more aggressively in lazy TLB mode"). That, in turn, gives us a power management and occasionally performance regression as compared to old kernels: a process that goes into a deep idle state on a given CPU and gets its mm flushed due to activity on a different CPU will wake the idle CPU. Reinstate the old ugly heuristic: if a CPU goes into ACPI C3 or an intel_idle state that is likely to cause a TLB flush gets its mm switched to init_mm before going idle. FWIW, this heuristic is lousy. Whether we should change CR3 before idle isn't a good hint except insofar as the performance hit is a bit lower if the TLB is getting flushed by the idle code anyway. What we really want to know is whether we anticipate being idle long enough that the mm is likely to be flushed before we wake up. This is more a matter of the expected latency than the idle state that gets chosen. This heuristic also completely fails on systems that don't know whether the TLB will be flushed (e.g. AMD systems?). OTOH it may be a bit obsolete anyway -- PCID systems don't presently benefit from this heuristic at all. We also shouldn't do this callback from innermost bit of the idle code due to the RCU nastiness it causes. All the information need is available before rcu_idle_enter() needs to happen. Signed-off-by: Andy Lutomirski Cc: Borislav Petkov Cc: Borislav Petkov Cc: Brian Gerst Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Fixes: 43858b4f25cf "x86/mm: Stop calling leave_mm() in idle code" Link: http://lkml.kernel.org/r/c513bbd4e653747213e05bc7062de000bf0202a5.1509793738.git.luto@kernel.org Signed-off-by: Ingo Molnar

Merge tag 'pm-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2017-09-05T19:19:08Z

Pull power management updates from Rafael Wysocki: "This time (again) cpufreq gets the majority of changes which mostly are driver updates (including a major consolidation of intel_pstate), some schedutil governor modifications and core cleanups. There also are some changes in the system suspend area, mostly related to diagnostics and debug messages plus some renames of things related to suspend-to-idle. One major change here is that suspend-to-idle is now going to be preferred over S3 on systems where the ACPI tables indicate to do so and provide requsite support (the Low Power Idle S0 _DSM in particular). The system sleep documentation and the tools related to it are updated too. The rest is a few cpuidle changes (nothing major), devfreq updates, generic power domains (genpd) framework updates and a few assorted modifications elsewhere. Specifics: - Drop the P-state selection algorithm based on a PID controller from intel_pstate and make it use the same P-state selection method (based on the CPU load) for all types of systems in the active mode (Rafael Wysocki, Srinivas Pandruvada). - Rework the cpufreq core and governors to make it possible to take cross-CPU utilization updates into account and modify the schedutil governor to actually do so (Viresh Kumar). - Clean up the handling of transition latency information in the cpufreq core and untangle it from the information on which drivers cannot do dynamic frequency switching (Viresh Kumar). - Add support for new SoCs (MT2701/MT7623 and MT7622) to the mediatek cpufreq driver and update its DT bindings (Sean Wang). - Modify the cpufreq dt-platdev driver to autimatically create cpufreq devices for the new (v2) Operating Performance Points (OPP) DT bindings and update its whitelist of supported systems (Viresh Kumar, Shubhrajyoti Datta, Marc Gonzalez, Khiem Nguyen, Finley Xiao). - Add support for Ux500 to the cpufreq-dt driver and drop the obsolete dbx500 cpufreq driver (Linus Walleij, Arnd Bergmann). - Add new SoC (R8A7795) support to the cpufreq rcar driver (Khiem Nguyen). - Fix and clean up assorted issues in the cpufreq drivers and core (Arvind Yadav, Christophe Jaillet, Colin Ian King, Gustavo Silva, Julia Lawall, Leonard Crestez, Rob Herring, Sudeep Holla). - Update the IO-wait boost handling in the schedutil governor to make it less aggressive (Joel Fernandes). - Rework system suspend diagnostics to make it print fewer messages to the kernel log by default, add a sysfs knob to allow more suspend-related messages to be printed and add Low Power S0 Idle constraints checks to the ACPI suspend-to-idle code (Rafael Wysocki, Srinivas Pandruvada). - Prefer suspend-to-idle over S3 on ACPI-based systems with the ACPI_FADT_LOW_POWER_S0 flag set and the Low Power Idle S0 _DSM interface present in the ACPI tables (Rafael Wysocki). - Update documentation related to system sleep and rename a number of items in the code to make it cleare that they are related to suspend-to-idle (Rafael Wysocki). - Export a variable allowing device drivers to check the target system sleep state from the core system suspend code (Florian Fainelli). - Clean up the cpuidle subsystem to handle the polling state on x86 in a more straightforward way and to use %pOF instead of full_name (Rafael Wysocki, Rob Herring). - Update the devfreq framework to fix and clean up a few minor issues (Chanwoo Choi, Rob Herring). - Extend diagnostics in the generic power domains (genpd) framework and clean it up slightly (Thara Gopinath, Rob Herring). - Fix and clean up a couple of issues in the operating performance points (OPP) framework (Viresh Kumar, Waldemar Rymarkiewicz). - Add support for RV1108 to the rockchip-io Adaptive Voltage Scaling (AVS) driver (David Wu). - Fix the usage of notifiers in CPU power management on some platforms (Alex Shi). - Update the pm-graph system suspend/hibernation and boot profiling utility (Todd Brandt). - Make it possible to run the cpupower utility without CPU0 (Prarit Bhargava)" * tag 'pm-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (87 commits) cpuidle: Make drivers initialize polling state cpuidle: Move polling state initialization code to separate file cpuidle: Eliminate the CPUIDLE_DRIVER_STATE_START symbol cpufreq: imx6q: Fix imx6sx low frequency support cpufreq: speedstep-lib: make several arrays static, makes code smaller PM: docs: Delete the obsolete states.txt document PM: docs: Describe high-level PM strategies and sleep states PM / devfreq: Fix memory leak when fail to register device PM / devfreq: Add dependency on PM_OPP PM / devfreq: Move private devfreq_update_stats() into devfreq PM / devfreq: Convert to using %pOF instead of full_name PM / AVS: rockchip-io: add io selectors and supplies for RV1108 cpufreq: ti: Fix 'of_node_put' being called twice in error handling path cpufreq: dt-platdev: Drop few entries from whitelist cpufreq: dt-platdev: Automatically create cpufreq device with OPP v2 ARM: ux500: don't select CPUFREQ_DT cpuidle: Convert to using %pOF instead of full_name cpufreq: Convert to using %pOF instead of full_name PM / Domains: Convert to using %pOF instead of full_name cpufreq: Cap the default transition delay value to 10 ms ...