user/sven/linux.git/drivers/acpi, branch v5.4.205

ACPI: property: Release subnode properties with data nodes

2022-06-14T16:11:45Z

commit 3bd561e1572ee02a50cd1a5be339abf1a5b78d56 upstream. struct acpi_device_properties describes one source of properties present on either struct acpi_device or struct acpi_data_node. When properties are parsed, both are populated but when released, only those properties that are associated with the device node are freed. Fix this by also releasing memory of the data node properties. Fixes: 5f5e4890d57a ("ACPI / property: Allow multiple property compatible _DSD entries") Cc: 4.20+ # 4.20+ Signed-off-by: Sakari Ailus Reviewed-by: Andy Shevchenko Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

ACPI: PM: Block ASUS B1400CEAE from suspend to idle by default

2022-06-14T16:11:28Z

[ Upstream commit d52848620de00cde4a3a5df908e231b8c8868250 ] ASUS B1400CEAE fails to resume from suspend to idle by default. This was bisected back to commit df4f9bc4fb9c ("nvme-pci: add support for ACPI StorageD3Enable property") but this is a red herring to the problem. Before this commit the system wasn't getting into deepest sleep state. Presumably this commit is allowing entry into deepest sleep state as advertised by firmware, but there are some other problems related to the wakeup. As it is confirmed the system works properly with S3, set the default for this system to S3. Reported-by: Jian-Hong Pan Link: https://bugzilla.kernel.org/show_bug.cgi?id=215742 Signed-off-by: Mario Limonciello Tested-by: Jian-Hong Pan Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

ACPI: sysfs: Fix BERT error region memory mapping

2022-06-06T06:33:49Z

commit 1bbc21785b7336619fb6a67f1fff5afdaf229acc upstream. Currently the sysfs interface maps the BERT error region as "memory" (through acpi_os_map_memory()) in order to copy the error records into memory buffers through memory operations (eg memory_read_from_buffer()). The OS system cannot detect whether the BERT error region is part of system RAM or it is "device memory" (eg BMC memory) and therefore it cannot detect which memory attributes the bus to memory support (and corresponding kernel mapping, unless firmware provides the required information). The acpi_os_map_memory() arch backend implementation determines the mapping attributes. On arm64, if the BERT error region is not present in the EFI memory map, the error region is mapped as device-nGnRnE; this triggers alignment faults since memcpy unaligned accesses are not allowed in device-nGnRnE regions. The ACPI sysfs code cannot therefore map by default the BERT error region with memory semantics but should use a safer default. Change the sysfs code to map the BERT error region as MMIO (through acpi_os_map_iomem()) and use the memcpy_fromio() interface to read the error region into the kernel buffer. Link: https://lore.kernel.org/linux-arm-kernel/31ffe8fc-f5ee-2858-26c5-0fd8bdd68702@arm.com Link: https://lore.kernel.org/linux-acpi/CAJZ5v0g+OVbhuUUDrLUCfX_mVqY_e8ubgLTU98=jfjTeb4t+Pw@mail.gmail.com Signed-off-by: Lorenzo Pieralisi Tested-by: Veronika Kabatova Tested-by: Aristeu Rozanski Acked-by: Ard Biesheuvel Signed-off-by: Rafael J. Wysocki Cc: dann frazier Signed-off-by: Greg Kroah-Hartman

ACPI: sysfs: Make sparse happy about address space in use

2022-06-06T06:33:49Z

commit bdd56d7d8931e842775d2e5b93d426a8d1940e33 upstream. Sparse is not happy about address space in use in acpi_data_show(): drivers/acpi/sysfs.c:428:14: warning: incorrect type in assignment (different address spaces) drivers/acpi/sysfs.c:428:14: expected void [noderef] __iomem *base drivers/acpi/sysfs.c:428:14: got void * drivers/acpi/sysfs.c:431:59: warning: incorrect type in argument 4 (different address spaces) drivers/acpi/sysfs.c:431:59: expected void const *from drivers/acpi/sysfs.c:431:59: got void [noderef] __iomem *base drivers/acpi/sysfs.c:433:30: warning: incorrect type in argument 1 (different address spaces) drivers/acpi/sysfs.c:433:30: expected void *logical_address drivers/acpi/sysfs.c:433:30: got void [noderef] __iomem *base Indeed, acpi_os_map_memory() returns a void pointer with dropped specific address space. Hence, we don't need to carry out __iomem in acpi_data_show(). Signed-off-by: Andy Shevchenko Signed-off-by: Rafael J. Wysocki Cc: dann frazier Signed-off-by: Greg Kroah-Hartman

ACPICA: Always create namespace nodes using acpi_ns_create_node()

2022-05-12T10:23:41Z

commit 25928deeb1e4e2cdae1dccff349320c6841eb5f8 upstream. ACPICA commit 29da9a2a3f5b2c60420893e5c6309a0586d7a329 ACPI is allocating an object using kmalloc(), but then frees it using kmem_cache_free(<"Acpi-Namespace" kmem_cache>). This is wrong and can lead to boot failures manifesting like this: hpet0: 3 comparators, 64-bit 100.000000 MHz counter clocksource: Switched to clocksource tsc-early BUG: unable to handle page fault for address: 000000003ffe0018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.6.0+ #211 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 RIP: 0010:kmem_cache_alloc+0x70/0x1d0 Code: 00 00 4c 8b 45 00 65 49 8b 50 08 65 4c 03 05 6f cc e7 7e 4d 8b 20 4d 85 e4 0f 84 3d 01 00 00 8b 45 20 48 8b 7d 00 48 8d 4a 01 <49> 8b 1c 04 4c 89 e0 65 48 0f c7 0f 0f 94 c0 84 c0 74 c5 8b 45 20 RSP: 0000:ffffc90000013df8 EFLAGS: 00010206 RAX: 0000000000000018 RBX: ffffffff81c49200 RCX: 0000000000000002 RDX: 0000000000000001 RSI: 0000000000000dc0 RDI: 000000000002b300 RBP: ffff88803e403d00 R08: ffff88803ec2b300 R09: 0000000000000001 R10: 0000000000000dc0 R11: 0000000000000006 R12: 000000003ffe0000 R13: ffffffff8110a583 R14: 0000000000000dc0 R15: ffffffff81c49a80 FS: 0000000000000000(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000003ffe0018 CR3: 0000000001c0a001 CR4: 00000000003606f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __trace_define_field+0x33/0xa0 event_trace_init+0xeb/0x2b4 tracer_init_tracefs+0x60/0x195 ? register_tracer+0x1e7/0x1e7 do_one_initcall+0x74/0x160 kernel_init_freeable+0x190/0x1f0 ? rest_init+0x9a/0x9a kernel_init+0x5/0xf6 ret_from_fork+0x35/0x40 CR2: 000000003ffe0018 ---[ end trace 707efa023f2ee960 ]--- RIP: 0010:kmem_cache_alloc+0x70/0x1d0 Bisection leads to unrelated changes in slab; Vlastimil Babka suggests an unrelated layout or slab merge change merely exposed the underlying bug. Link: https://lore.kernel.org/lkml/4dc93ff8-f86e-f4c9-ebeb-6d3153a78d03@oracle.com/ Link: https://lore.kernel.org/r/a1461e21-c744-767d-6dfc-6641fd3e3ce2@siemens.com Link: https://github.com/acpica/acpica/commit/29da9a2a Fixes: f79c8e4136ea ("ACPICA: Namespace: simplify creation of the initial/default namespace") Reported-by: Jan Kiszka Diagnosed-by: Vlastimil Babka Diagnosed-by: Kees Cook Signed-off-by: Vegard Nossum Signed-off-by: Bob Moore Signed-off-by: Erik Kaneda Cc: 5.10+ # 5.10+ Signed-off-by: Rafael J. Wysocki Cc: "Jason A. Donenfeld" Signed-off-by: Greg Kroah-Hartman

ACPI: processor idle: Check for architectural support for LPI

2022-04-15T12:18:41Z

commit eb087f305919ee8169ad65665610313e74260463 upstream. When `osc_pc_lpi_support_confirmed` is set through `_OSC` and `_LPI` is populated then the cpuidle driver assumes that LPI is fully functional. However currently the kernel only provides architectural support for LPI on ARM. This leads to high power consumption on X86 platforms that otherwise try to enable LPI. So probe whether or not LPI support is implemented before enabling LPI in the kernel. This is done by overloading `acpi_processor_ffh_lpi_probe` to check whether it returns `-EOPNOTSUPP`. It also means that all future implementations of `acpi_processor_ffh_lpi_probe` will need to follow these semantics as well. Reviewed-by: Sudeep Holla Signed-off-by: Mario Limonciello Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

ACPI: CPPC: Avoid out of bounds access when parsing _CPC data

2022-04-15T12:18:29Z

commit 40d8abf364bcab23bc715a9221a3c8623956257b upstream. If the NumEntries field in the _CPC return package is less than 2, do not attempt to access the "Revision" element of that package, because it may not be present then. Fixes: 337aadff8e45 ("ACPI: Introduce CPU performance controls using CPPC") BugLink: https://lore.kernel.org/lkml/20220322143534.GC32582@xsang-OptiPlex-9020/ Reported-by: kernel test robot Signed-off-by: Rafael J. Wysocki Reviewed-by: Huang Rui Signed-off-by: Greg Kroah-Hartman

ACPI/APEI: Limit printable size of BERT table data

2022-04-15T12:18:23Z

[ Upstream commit 3f8dec116210ca649163574ed5f8df1e3b837d07 ] Platforms with large BERT table data can trigger soft lockup errors while attempting to print the entire BERT table data to the console at boot: watchdog: BUG: soft lockup - CPU#160 stuck for 23s! [swapper/0:1] Observed on Ampere Altra systems with a single BERT record of ~250KB. The original bert driver appears to have assumed relatively small table data. Since it is impractical to reassemble large table data from interwoven console messages, and the table data is available in /sys/firmware/acpi/tables/data/BERT limit the size for tables printed to the console to 1024 (for no reason other than it seemed like a good place to kick off the discussion, would appreciate feedback from existing users in terms of what size would maintain their current usage model). Alternatively, we could make printing a CONFIG option, use the bert_disable boot arg (or something similar), or use a debug log level. However, all those solutions require extra steps or change the existing behavior for small table data. Limiting the size preserves existing behavior on existing platforms with small table data, and eliminates the soft lockups for platforms with large table data, while still making it available. Signed-off-by: Darren Hart Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

ACPICA: Avoid walking the ACPI Namespace if it is not there

2022-04-15T12:18:22Z

[ Upstream commit 0c9992315e738e7d6e927ef36839a466b080dba6 ] ACPICA commit b1c3656ef4950098e530be68d4b589584f06cddc Prevent acpi_ns_walk_namespace() from crashing when called with start_node equal to ACPI_ROOT_OBJECT if the Namespace has not been instantiated yet and acpi_gbl_root_node is NULL. For instance, this can happen if the kernel is run with "acpi=off" in the command line. Link: https://github.com/acpica/acpica/commit/b1c3656ef4950098e530be68d4b589584f06cddc Link: https://lore.kernel.org/linux-acpi/CAJZ5v0hJWW_vZ3wwajE7xT38aWjY7cZyvqMJpXHzUL98-SiCVQ@mail.gmail.com/ Reported-by: Hans de Goede Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

ACPI: APEI: fix return value of __setup handlers

2022-04-15T12:18:05Z

[ Upstream commit f3303ff649dbf7dcdc6a6e1a922235b12b3028f4 ] __setup() handlers should return 1 to indicate that the boot option has been handled. Returning 0 causes a boot option to be listed in the Unknown kernel command line parameters and also added to init's arg list (if no '=' sign) or environment list (if of the form 'a=b'). Unknown kernel command line parameters "erst_disable bert_disable hest_disable BOOT_IMAGE=/boot/bzImage-517rc6", will be passed to user space. Run /sbin/init as init process with arguments: /sbin/init erst_disable bert_disable hest_disable with environment: HOME=/ TERM=linux BOOT_IMAGE=/boot/bzImage-517rc6 Fixes: a3e2acc5e37b ("ACPI / APEI: Add Boot Error Record Table (BERT) support") Fixes: a08f82d08053 ("ACPI, APEI, Error Record Serialization Table (ERST) support") Fixes: 9dc966641677 ("ACPI, APEI, HEST table parsing") Signed-off-by: Randy Dunlap Reported-by: Igor Zhbanov Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Reviewed-by: "Huang, Ying" Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin