user/sven/linux.git/drivers/amba, branch v5.12.8

amba: Make use of bus_type functions

2021-02-02T13:26:02Z

Instead of assigning the needed functions for each driver separately do it only once in amba_bustype. Move the definition of the functions to their proper place among the other callbacks used there. Note that the bus's shutdown function might be called for unbound devices, too, so it needs additional guarding. This prepares getting rid of these callbacks in struct device_driver. Reviewed-by: Ulf Hansson Reviewed-by: Arnd Bergmann Link: https://lore.kernel.org/r/20210126165835.687514-6-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König

amba: Make the remove callback return void

2021-02-02T13:25:50Z

All amba drivers return 0 in their remove callback. Together with the driver core ignoring the return value anyhow, it doesn't make sense to return a value here. Change the remove prototype to return void, which makes it explicit that returning an error value doesn't work as expected. This simplifies changing the core remove callback to return void, too. Reviewed-by: Ulf Hansson Reviewed-by: Arnd Bergmann Acked-by: Alexandre Belloni Acked-by: Dmitry Torokhov Acked-by: Krzysztof Kozlowski # for drivers/memory Acked-by: Mark Brown Acked-by: Linus Walleij Acked-by: Suzuki K Poulose # for hwtracing/coresight Acked-By: Vinod Koul # for dmaengine Acked-by: Guenter Roeck # for watchdog Acked-by: Wolfram Sang # for I2C Acked-by: Takashi Iwai # for sound Acked-by: Vladimir Zapolskiy # for memory/pl172 Acked-by: Greg Kroah-Hartman Link: https://lore.kernel.org/r/20210126165835.687514-5-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König

amba: reorder functions

2021-02-02T13:24:20Z

Put helpers (here: amba_get_enable_pclk and amba_put_disable_pclk) at the top of the file and then define callbacks directly before the structs they are used in; in the same order. Reviewed-by: Ulf Hansson Reviewed-by: Arnd Bergmann Link: https://lore.kernel.org/r/20210126165835.687514-3-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König

amba: Fix resource leak for drivers without .remove

2021-02-02T13:24:10Z

Consider an amba driver with a .probe but without a .remove callback (e.g. pl061_gpio_driver). The function amba_probe() is called to bind a device and so dev_pm_domain_attach() and others are called. As there is no remove callback amba_remove() isn't called at unbind time however and so calling dev_pm_domain_detach() is missed and the pm domain keeps active. To fix this always use the core driver callbacks and handle missing amba callbacks there. For probe refuse registration as a driver without probe doesn't make sense. Fixes: 7cfe249475fd ("ARM: AMBA: Add pclk support to AMBA bus infrastructure") Reviewed-by: Ulf Hansson Reviewed-by: Arnd Bergmann Link: https://lore.kernel.org/r/20210126165835.687514-2-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König

ARM: tegra: Replace zero-length array with flexible-array

2020-06-16T04:08:28Z

There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://github.com/KSPP/linux/issues/21 Signed-off-by: Gustavo A. R. Silva

Merge tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2020-06-05T02:47:11Z

Pull ARM SoC updates from Arnd Bergmann: "One new platform gets added, the Realtek RTD1195, which is an older Cortex-a7 based relative of the RTD12xx chips that are already supported in arch/arm64. The platform may also be extended to support running 32-bit kernels on those 64-bit chips for memory-constrained machines. In the Renesas shmobile platform, we gain support for "RZ/G1H" or R8A7742, an eight-core chip based on Cortex-A15 and Cortex-A7 cores, originally released in 2016 as one of the last high-end 32-bit designs. There is ongoing cleanup for the integrator, tegra, imx, and omap2 platforms, with integrator getting very close to the goal of having zero code in arch/arm/, and omap2 moving more of the chip specifics from old board code into device tree files. The Versatile Express platform is made more modular, with built-in drivers now becoming loadable modules. This is part of a greater effort for the Android OS to have a common kernel binary for all platforms and any platform specific code in loadable modules. The PXA platform drops support for Compulab's pxa2xx boards that had rather unusual flash and PCI drivers but no known users remaining. All device drivers specific to those boards can now get removed as well. Across platforms, there is ongoing cleanup, with Geert and Rob revisiting some a lot of Kconfig options" * tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits) ARM: omap2: fix omap5_realtime_timer_init definition ARM: zynq: Don't select CONFIG_ICST ARM: OMAP2+: Fix regression for using local timer on non-SMP SoCs clk: versatile: Fix kconfig dependency on COMMON_CLK_VERSATILE ARM: davinci: fix build failure without I2C power: reset: vexpress: fix build issue power: vexpress: cleanup: use builtin_platform_driver power: vexpress: add suppress_bind_attrs to true Revert "ARM: vexpress: Don't select VEXPRESS_CONFIG" MAINTAINERS: pxa: remove Compulab arm/pxa support ARM: pxa: remove Compulab pxa2xx boards bus: arm-integrator-lm: Fix return value check in integrator_ap_lm_probe() soc: imx: move cpu code to drivers/soc/imx ARM: imx: move cpu definitions into a header ARM: imx: use device_initcall for imx_soc_device_init ARM: imx: pcm037: make pcm970_sja1000_platform_data static bus: ti-sysc: Timers no longer need legacy quirk handling ARM: OMAP2+: Drop old timer code for dmtimer and 32k counter ARM: dts: Configure system timers for omap2 ARM: dts: Configure system timers for ti81xx ...

amba: Retry adding deferred devices at late_initcall

2020-05-05T16:43:01Z

If amba bus devices defer when adding, the amba bus code simply retries adding the devices every 5 seconds. This doesn't work well as it completely unsynchronized with starting the init process which can happen in less than 5 secs. Add a retry during late_initcall. If the amba devices are added, then deferred probe takes over. If the dependencies have not probed at this point, then there's no improvement over previous behavior. To completely solve this, we'd need to retry after every successful probe as deferred probe does. The list_empty() check now happens outside the mutex, but the mutex wasn't necessary in the first place. This needed to use deferred probe instead of fragile initcall ordering on 32-bit VExpress systems where the apb_pclk has a number of probe dependencies (vexpress-sysregs, vexpress-config). Cc: John Stultz Cc: Saravana Kannan Cc: Nicolas Saenz Julienne Cc: Geert Uytterhoeven Cc: Russell King Tested-by: Sudeep Holla Reviewed-by: Sudeep Holla Reviewed-by: Linus Walleij Signed-off-by: Rob Herring

amba: Initialize dma_parms for amba devices

2020-04-28T15:44:34Z

It's currently the amba driver's responsibility to initialize the pointer, dma_parms, for its corresponding struct device. The benefit with this approach allows us to avoid the initialization and to not waste memory for the struct device_dma_parameters, as this can be decided on a case by case basis. However, it has turned out that this approach is not very practical. Not only does it lead to open coding, but also to real errors. In principle callers of dma_set_max_seg_size() doesn't check the error code, but just assumes it succeeds. For these reasons, let's do the initialization from the common amba bus at the device registration point. This also follows the way the PCI devices are being managed, see pci_device_add(). Suggested-by: Christoph Hellwig Cc: Russell King Cc: Tested-by: Haibo Chen Reviewed-by: Arnd Bergmann Signed-off-by: Ulf Hansson Reviewed-by: Christoph Hellwig Link: https://lore.kernel.org/r/20200422101013.31267-1-ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

2019-10-23T10:26:33Z

:Pull ARM fixes from Russell King: - fix for alignment faults under high memory pressure - use u32 for ARM instructions in fault handler - mark functions that must always be inlined with __always_inline - fix for nommu XIP - fix ARMv7M switch to handler mode in reboot path - fix the recently introduced AMBA reset control error paths * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8926/1: v7m: remove register save to stack before svc ARM: 8914/1: NOMMU: Fix exc_ret for XIP ARM: 8908/1: add __always_inline to functions called from __get_user_check() ARM: mm: alignment: use "u32" for 32-bit instructions ARM: mm: fix alignment handler faults under memory pressure drivers/amba: fix reset control error handling

drivers/amba: fix reset control error handling

2019-10-09T21:59:30Z

With commit 79bdcb202a35 ("ARM: 8906/1: drivers/amba: add reset control to amba bus probe") it is possible for the the amba bus driver to defer probing the device for its IDs because the reset driver may be probed later. However when a subsequent probe occurs, the call to request_resource() in the driver returns -EBUSY as the driver has not released the resource from the initial probe attempt - or cleaned up any of the preceding actions. Fix this both for the deferred probe case as well as a failure to get the reset. Fixes: 79bdcb202a35 ("ARM: 8906/1: drivers/amba: add reset control to amba bus probe") Reported-by: Dinh Nguyen Tested-by: Dinh Nguyen Signed-off-by: Russell King