user/sven/linux.git/drivers/amba, branch v5.4.3

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

2019-10-23T10:26:33Z

:Pull ARM fixes from Russell King: - fix for alignment faults under high memory pressure - use u32 for ARM instructions in fault handler - mark functions that must always be inlined with __always_inline - fix for nommu XIP - fix ARMv7M switch to handler mode in reboot path - fix the recently introduced AMBA reset control error paths * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8926/1: v7m: remove register save to stack before svc ARM: 8914/1: NOMMU: Fix exc_ret for XIP ARM: 8908/1: add __always_inline to functions called from __get_user_check() ARM: mm: alignment: use "u32" for 32-bit instructions ARM: mm: fix alignment handler faults under memory pressure drivers/amba: fix reset control error handling

drivers/amba: fix reset control error handling

2019-10-09T21:59:30Z

With commit 79bdcb202a35 ("ARM: 8906/1: drivers/amba: add reset control to amba bus probe") it is possible for the the amba bus driver to defer probing the device for its IDs because the reset driver may be probed later. However when a subsequent probe occurs, the call to request_resource() in the driver returns -EBUSY as the driver has not released the resource from the initial probe attempt - or cleaned up any of the preceding actions. Fix this both for the deferred probe case as well as a failure to get the reset. Fixes: 79bdcb202a35 ("ARM: 8906/1: drivers/amba: add reset control to amba bus probe") Reported-by: Dinh Nguyen Tested-by: Dinh Nguyen Signed-off-by: Russell King

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

2019-09-22T16:39:09Z

Pull ARM updates from Russell King: - fix various clang build and cppcheck issues - switch ARM to use new common outgoing-CPU-notification code - add some additional explanation about the boot code - kbuild "make clean" fixes - get rid of another "(____ptrval____)", this time for the VDSO code - avoid treating cache maintenance faults as a write - add a frame pointer unwinder implementation for clang - add EDAC support for Aurora L2 cache - improve robustness of adjust_lowmem_bounds() finding the bounds of lowmem. - add reset control for AMBA primecell devices * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (24 commits) ARM: 8906/1: drivers/amba: add reset control to amba bus probe ARM: 8905/1: Emit __gnu_mcount_nc when using Clang 10.0.0 or newer ARM: 8904/1: skip nomap memblocks while finding the lowmem/highmem boundary ARM: 8903/1: ensure that usable memory in bank 0 starts from a PMD-aligned address ARM: 8891/1: EDAC: armada_xp: Add support for more SoCs ARM: 8888/1: EDAC: Add driver for the Marvell Armada XP SDRAM and L2 cache ECC ARM: 8892/1: EDAC: Add missing debugfs_create_x32 wrapper ARM: 8890/1: l2x0: add marvell,ecc-enable property for aurora ARM: 8889/1: dt-bindings: document marvell,ecc-enable binding ARM: 8886/1: l2x0: support parity-enable/disable on aurora ARM: 8885/1: aurora-l2: add defines for parity and ECC registers ARM: 8887/1: aurora-l2: add prefix to MAX_RANGE_SIZE ARM: 8902/1: l2c: move cache-aurora-l2.h to asm/hardware ARM: 8900/1: UNWINDER_FRAME_POINTER implementation for Clang ARM: 8898/1: mm: Don't treat faults reported from cache maintenance as writes ARM: 8896/1: VDSO: Don't leak kernel addresses ARM: 8895/1: visit mach-* and plat-* directories when cleaning ARM: 8894/1: boot: Replace open-coded nop with macro ARM: 8893/1: boot: Explain the 8 nops ARM: 8876/1: fix O= building with CONFIG_FPE_FASTFPE ...

ARM: 8906/1: drivers/amba: add reset control to amba bus probe

2019-09-10T14:22:57Z

The primecell controller on some SoCs, i.e. SoCFPGA, is held in reset by default. Until recently, the DMA controller was brought out of reset by the bootloader(i.e. U-Boot). But a recent change in U-Boot, the peripherals that are not used are held in reset and are left to Linux to bring them out of reset. Add a mechanism for getting the reset property and de-assert the primecell module from reset if found. This is a not a hard fail if the reset property is not present in the device tree node, so the driver will continue to probe. Because there are different variants of the controller that may have multiple reset signals, the code will find all reset(s) specified and de-assert them. Signed-off-by: Dinh Nguyen Reviewed-by: Rob Herring Reviewed-by: Philipp Zabel Reviewed-by: Linus Walleij Signed-off-by: Russell King

drivers: Introduce device lookup variants by of_node

2019-07-30T11:07:41Z

Introduce wrappers for {bus/driver/class}_find_device() to locate devices by its of_node. Cc: Maarten Lankhorst Cc: Maxime Ripard Cc: dri-devel@lists.freedesktop.org Cc: David Airlie Cc: Daniel Vetter Cc: devicetree@vger.kernel.org Cc: Florian Fainelli Cc: Frank Rowand Cc: Heiko Stuebner Cc: Liam Girdwood Cc: linux-i2c@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-spi@vger.kernel.org Cc: Mathieu Poirier Cc: Rob Herring Cc: Srinivas Kandagatla Cc: Takashi Iwai Cc: Alan Tull Cc: linux-fpga@vger.kernel.org Cc: Peter Rosin Cc: Florian Fainelli Cc: Heiner Kallweit Cc: "David S. Miller" Cc: Andrew Lunn Cc: Liam Girdwood Cc: "Rafael J. Wysocki" Cc: Thor Thayer Cc: Jiri Slaby Cc: Andrew Lunn Cc: Peter Rosin Signed-off-by: Suzuki K Poulose Acked-by: Lee Jones Acked-by: Wolfram Sang # I2C part Acked-by: Moritz Fischer # For FPGA part Acked-by: Mark Brown Link: https://lore.kernel.org/r/20190723221838.12024-3-suzuki.poulose@arm.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2019-07-12T19:24:03Z

Pull driver core and debugfs updates from Greg KH: "Here is the "big" driver core and debugfs changes for 5.3-rc1 It's a lot of different patches, all across the tree due to some api changes and lots of debugfs cleanups. Other than the debugfs cleanups, in this set of changes we have: - bus iteration function cleanups - scripts/get_abi.pl tool to display and parse Documentation/ABI entries in a simple way - cleanups to Documenatation/ABI/ entries to make them parse easier due to typos and other minor things - default_attrs use for some ktype users - driver model documentation file conversions to .rst - compressed firmware file loading - deferred probe fixes All of these have been in linux-next for a while, with a bunch of merge issues that Stephen has been patient with me for" * tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits) debugfs: make error message a bit more verbose orangefs: fix build warning from debugfs cleanup patch ubifs: fix build warning after debugfs cleanup patch driver: core: Allow subsystems to continue deferring probe drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT arch_topology: Remove error messages on out-of-memory conditions lib: notifier-error-inject: no need to check return value of debugfs_create functions swiotlb: no need to check return value of debugfs_create functions ceph: no need to check return value of debugfs_create functions sunrpc: no need to check return value of debugfs_create functions ubifs: no need to check return value of debugfs_create functions orangefs: no need to check return value of debugfs_create functions nfsd: no need to check return value of debugfs_create functions lib: 842: no need to check return value of debugfs_create functions debugfs: provide pr_fmt() macro debugfs: log errors when something goes wrong drivers: s390/cio: Fix compilation warning about const qualifiers drivers: Add generic helper to match by of_node driver_find_device: Unify the match function with class_find_device() bus_find_device: Unify the match callback with class_find_device ...

driver_find_device: Unify the match function with class_find_device()

2019-06-24T03:22:31Z

The driver_find_device() accepts a match function pointer to filter the devices for lookup, similar to bus/class_find_device(). However, there is a minor difference in the prototype for the match parameter for driver_find_device() with the now unified version accepted by {bus/class}_find_device(), where it doesn't accept a "const" qualifier for the data argument. This prevents us from reusing the generic match functions for driver_find_device(). For this reason, change the prototype of the driver_find_device() to make the "match" parameter in line with {bus/class}_find_device() and adjust its callers to use the const qualifier. Also, we could now promote the "data" parameter to const as we pass it down as a const parameter to the match functions. Cc: Corey Minyard Cc: Russell King Cc: Thierry Reding Cc: Greg Kroah-Hartman Cc: "Rafael J. Wysocki" Cc: Will Deacon Cc: Joerg Roedel Cc: Peter Oberparleiter Cc: Sebastian Ott Cc: David Airlie Cc: Daniel Vetter Cc: Nehal Shah Cc: Shyam Sundar S K Cc: Lee Jones Cc: Christian Borntraeger Signed-off-by: Suzuki K Poulose Signed-off-by: Greg Kroah-Hartman

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55Z

Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Enrico Weigelt Reviewed-by: Kate Stewart Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282

2019-06-05T15:36:37Z

Based on 1 normalized pattern(s): this software is licensed under the terms of the gnu general public license version 2 as published by the free software foundation and may be copied distributed and modified under those terms this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 285 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Alexios Zavras Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de Signed-off-by: Greg Kroah-Hartman

treewide: Add SPDX license identifier - Makefile/Kconfig

2019-05-21T08:50:46Z

Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman