user/sven/linux.git/drivers/amba, branch v5.8.8

ARM: tegra: Replace zero-length array with flexible-array

2020-06-16T04:08:28Z

There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://github.com/KSPP/linux/issues/21 Signed-off-by: Gustavo A. R. Silva

Merge tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2020-06-05T02:47:11Z

Pull ARM SoC updates from Arnd Bergmann: "One new platform gets added, the Realtek RTD1195, which is an older Cortex-a7 based relative of the RTD12xx chips that are already supported in arch/arm64. The platform may also be extended to support running 32-bit kernels on those 64-bit chips for memory-constrained machines. In the Renesas shmobile platform, we gain support for "RZ/G1H" or R8A7742, an eight-core chip based on Cortex-A15 and Cortex-A7 cores, originally released in 2016 as one of the last high-end 32-bit designs. There is ongoing cleanup for the integrator, tegra, imx, and omap2 platforms, with integrator getting very close to the goal of having zero code in arch/arm/, and omap2 moving more of the chip specifics from old board code into device tree files. The Versatile Express platform is made more modular, with built-in drivers now becoming loadable modules. This is part of a greater effort for the Android OS to have a common kernel binary for all platforms and any platform specific code in loadable modules. The PXA platform drops support for Compulab's pxa2xx boards that had rather unusual flash and PCI drivers but no known users remaining. All device drivers specific to those boards can now get removed as well. Across platforms, there is ongoing cleanup, with Geert and Rob revisiting some a lot of Kconfig options" * tag 'arm-soc-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits) ARM: omap2: fix omap5_realtime_timer_init definition ARM: zynq: Don't select CONFIG_ICST ARM: OMAP2+: Fix regression for using local timer on non-SMP SoCs clk: versatile: Fix kconfig dependency on COMMON_CLK_VERSATILE ARM: davinci: fix build failure without I2C power: reset: vexpress: fix build issue power: vexpress: cleanup: use builtin_platform_driver power: vexpress: add suppress_bind_attrs to true Revert "ARM: vexpress: Don't select VEXPRESS_CONFIG" MAINTAINERS: pxa: remove Compulab arm/pxa support ARM: pxa: remove Compulab pxa2xx boards bus: arm-integrator-lm: Fix return value check in integrator_ap_lm_probe() soc: imx: move cpu code to drivers/soc/imx ARM: imx: move cpu definitions into a header ARM: imx: use device_initcall for imx_soc_device_init ARM: imx: pcm037: make pcm970_sja1000_platform_data static bus: ti-sysc: Timers no longer need legacy quirk handling ARM: OMAP2+: Drop old timer code for dmtimer and 32k counter ARM: dts: Configure system timers for omap2 ARM: dts: Configure system timers for ti81xx ...

amba: Retry adding deferred devices at late_initcall

2020-05-05T16:43:01Z

If amba bus devices defer when adding, the amba bus code simply retries adding the devices every 5 seconds. This doesn't work well as it completely unsynchronized with starting the init process which can happen in less than 5 secs. Add a retry during late_initcall. If the amba devices are added, then deferred probe takes over. If the dependencies have not probed at this point, then there's no improvement over previous behavior. To completely solve this, we'd need to retry after every successful probe as deferred probe does. The list_empty() check now happens outside the mutex, but the mutex wasn't necessary in the first place. This needed to use deferred probe instead of fragile initcall ordering on 32-bit VExpress systems where the apb_pclk has a number of probe dependencies (vexpress-sysregs, vexpress-config). Cc: John Stultz Cc: Saravana Kannan Cc: Nicolas Saenz Julienne Cc: Geert Uytterhoeven Cc: Russell King Tested-by: Sudeep Holla Reviewed-by: Sudeep Holla Reviewed-by: Linus Walleij Signed-off-by: Rob Herring

amba: Initialize dma_parms for amba devices

2020-04-28T15:44:34Z

It's currently the amba driver's responsibility to initialize the pointer, dma_parms, for its corresponding struct device. The benefit with this approach allows us to avoid the initialization and to not waste memory for the struct device_dma_parameters, as this can be decided on a case by case basis. However, it has turned out that this approach is not very practical. Not only does it lead to open coding, but also to real errors. In principle callers of dma_set_max_seg_size() doesn't check the error code, but just assumes it succeeds. For these reasons, let's do the initialization from the common amba bus at the device registration point. This also follows the way the PCI devices are being managed, see pci_device_add(). Suggested-by: Christoph Hellwig Cc: Russell King Cc: Tested-by: Haibo Chen Reviewed-by: Arnd Bergmann Signed-off-by: Ulf Hansson Reviewed-by: Christoph Hellwig Link: https://lore.kernel.org/r/20200422101013.31267-1-ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

2019-10-23T10:26:33Z

:Pull ARM fixes from Russell King: - fix for alignment faults under high memory pressure - use u32 for ARM instructions in fault handler - mark functions that must always be inlined with __always_inline - fix for nommu XIP - fix ARMv7M switch to handler mode in reboot path - fix the recently introduced AMBA reset control error paths * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8926/1: v7m: remove register save to stack before svc ARM: 8914/1: NOMMU: Fix exc_ret for XIP ARM: 8908/1: add __always_inline to functions called from __get_user_check() ARM: mm: alignment: use "u32" for 32-bit instructions ARM: mm: fix alignment handler faults under memory pressure drivers/amba: fix reset control error handling

drivers/amba: fix reset control error handling

2019-10-09T21:59:30Z

With commit 79bdcb202a35 ("ARM: 8906/1: drivers/amba: add reset control to amba bus probe") it is possible for the the amba bus driver to defer probing the device for its IDs because the reset driver may be probed later. However when a subsequent probe occurs, the call to request_resource() in the driver returns -EBUSY as the driver has not released the resource from the initial probe attempt - or cleaned up any of the preceding actions. Fix this both for the deferred probe case as well as a failure to get the reset. Fixes: 79bdcb202a35 ("ARM: 8906/1: drivers/amba: add reset control to amba bus probe") Reported-by: Dinh Nguyen Tested-by: Dinh Nguyen Signed-off-by: Russell King

Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

2019-09-22T16:39:09Z

Pull ARM updates from Russell King: - fix various clang build and cppcheck issues - switch ARM to use new common outgoing-CPU-notification code - add some additional explanation about the boot code - kbuild "make clean" fixes - get rid of another "(____ptrval____)", this time for the VDSO code - avoid treating cache maintenance faults as a write - add a frame pointer unwinder implementation for clang - add EDAC support for Aurora L2 cache - improve robustness of adjust_lowmem_bounds() finding the bounds of lowmem. - add reset control for AMBA primecell devices * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (24 commits) ARM: 8906/1: drivers/amba: add reset control to amba bus probe ARM: 8905/1: Emit __gnu_mcount_nc when using Clang 10.0.0 or newer ARM: 8904/1: skip nomap memblocks while finding the lowmem/highmem boundary ARM: 8903/1: ensure that usable memory in bank 0 starts from a PMD-aligned address ARM: 8891/1: EDAC: armada_xp: Add support for more SoCs ARM: 8888/1: EDAC: Add driver for the Marvell Armada XP SDRAM and L2 cache ECC ARM: 8892/1: EDAC: Add missing debugfs_create_x32 wrapper ARM: 8890/1: l2x0: add marvell,ecc-enable property for aurora ARM: 8889/1: dt-bindings: document marvell,ecc-enable binding ARM: 8886/1: l2x0: support parity-enable/disable on aurora ARM: 8885/1: aurora-l2: add defines for parity and ECC registers ARM: 8887/1: aurora-l2: add prefix to MAX_RANGE_SIZE ARM: 8902/1: l2c: move cache-aurora-l2.h to asm/hardware ARM: 8900/1: UNWINDER_FRAME_POINTER implementation for Clang ARM: 8898/1: mm: Don't treat faults reported from cache maintenance as writes ARM: 8896/1: VDSO: Don't leak kernel addresses ARM: 8895/1: visit mach-* and plat-* directories when cleaning ARM: 8894/1: boot: Replace open-coded nop with macro ARM: 8893/1: boot: Explain the 8 nops ARM: 8876/1: fix O= building with CONFIG_FPE_FASTFPE ...

ARM: 8906/1: drivers/amba: add reset control to amba bus probe

2019-09-10T14:22:57Z

The primecell controller on some SoCs, i.e. SoCFPGA, is held in reset by default. Until recently, the DMA controller was brought out of reset by the bootloader(i.e. U-Boot). But a recent change in U-Boot, the peripherals that are not used are held in reset and are left to Linux to bring them out of reset. Add a mechanism for getting the reset property and de-assert the primecell module from reset if found. This is a not a hard fail if the reset property is not present in the device tree node, so the driver will continue to probe. Because there are different variants of the controller that may have multiple reset signals, the code will find all reset(s) specified and de-assert them. Signed-off-by: Dinh Nguyen Reviewed-by: Rob Herring Reviewed-by: Philipp Zabel Reviewed-by: Linus Walleij Signed-off-by: Russell King

drivers: Introduce device lookup variants by of_node

2019-07-30T11:07:41Z

Introduce wrappers for {bus/driver/class}_find_device() to locate devices by its of_node. Cc: Maarten Lankhorst Cc: Maxime Ripard Cc: dri-devel@lists.freedesktop.org Cc: David Airlie Cc: Daniel Vetter Cc: devicetree@vger.kernel.org Cc: Florian Fainelli Cc: Frank Rowand Cc: Heiko Stuebner Cc: Liam Girdwood Cc: linux-i2c@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-spi@vger.kernel.org Cc: Mathieu Poirier Cc: Rob Herring Cc: Srinivas Kandagatla Cc: Takashi Iwai Cc: Alan Tull Cc: linux-fpga@vger.kernel.org Cc: Peter Rosin Cc: Florian Fainelli Cc: Heiner Kallweit Cc: "David S. Miller" Cc: Andrew Lunn Cc: Liam Girdwood Cc: "Rafael J. Wysocki" Cc: Thor Thayer Cc: Jiri Slaby Cc: Andrew Lunn Cc: Peter Rosin Signed-off-by: Suzuki K Poulose Acked-by: Lee Jones Acked-by: Wolfram Sang # I2C part Acked-by: Moritz Fischer # For FPGA part Acked-by: Mark Brown Link: https://lore.kernel.org/r/20190723221838.12024-3-suzuki.poulose@arm.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2019-07-12T19:24:03Z

Pull driver core and debugfs updates from Greg KH: "Here is the "big" driver core and debugfs changes for 5.3-rc1 It's a lot of different patches, all across the tree due to some api changes and lots of debugfs cleanups. Other than the debugfs cleanups, in this set of changes we have: - bus iteration function cleanups - scripts/get_abi.pl tool to display and parse Documentation/ABI entries in a simple way - cleanups to Documenatation/ABI/ entries to make them parse easier due to typos and other minor things - default_attrs use for some ktype users - driver model documentation file conversions to .rst - compressed firmware file loading - deferred probe fixes All of these have been in linux-next for a while, with a bunch of merge issues that Stephen has been patient with me for" * tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits) debugfs: make error message a bit more verbose orangefs: fix build warning from debugfs cleanup patch ubifs: fix build warning after debugfs cleanup patch driver: core: Allow subsystems to continue deferring probe drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT arch_topology: Remove error messages on out-of-memory conditions lib: notifier-error-inject: no need to check return value of debugfs_create functions swiotlb: no need to check return value of debugfs_create functions ceph: no need to check return value of debugfs_create functions sunrpc: no need to check return value of debugfs_create functions ubifs: no need to check return value of debugfs_create functions orangefs: no need to check return value of debugfs_create functions nfsd: no need to check return value of debugfs_create functions lib: 842: no need to check return value of debugfs_create functions debugfs: provide pr_fmt() macro debugfs: log errors when something goes wrong drivers: s390/cio: Fix compilation warning about const qualifiers drivers: Add generic helper to match by of_node driver_find_device: Unify the match function with class_find_device() bus_find_device: Unify the match callback with class_find_device ...