user/sven/linux.git/drivers/ata/libata-core.c, branch v3.0.71

libata: set dma_mode to 0xff in reset

2013-01-17T16:43:54Z

commit 5416912af75de9cba5d1c75b99a7888b0bbbd2fb upstream. ata_device->dma_mode's initial value is zero, which is not a valid dma mode, but ata_dma_enabled will return true for this value. This patch sets dma_mode to 0xff in reset function, so that ata_dma_enabled will not return true for this case, or it will cause problem for pata_acpi. The corrsponding bugzilla page is at: https://bugzilla.kernel.org/show_bug.cgi?id=49151 Reported-by: Phillip Wood Signed-off-by: Aaron Lu Tested-by: Szymon Janc Tested-by: Dutra Julio Acked-by: Alan Cox Signed-off-by: Jeff Garzik Signed-off-by: Greg Kroah-Hartman

libata: Prevent interface errors with Seagate FreeAgent GoFlex

2012-10-02T16:47:41Z

commit c531077f40abc9f2129c4c83a30b3f8d6ce1c0e7 upstream. When using my Seagate FreeAgent GoFlex eSATAp external disk enclosure, interface errors are always seen until 1.5Gbps is negotiated [1]. This occurs using any disk in the enclosure, and when the disk is connected directly with a generic passive eSATAp cable, we see stable 3Gbps operation as expected. Blacklist 3Gbps mode to avoid dataloss and the ~30s delay bus reset and renegotiation incurs. Signed-off-by: Daniel J Blueman Signed-off-by: Jeff Garzik Signed-off-by: Greg Kroah-Hartman

libata: apply NOSETXFER horkage to the affected Pioneer drives

2011-06-23T20:40:50Z

regardless of firmware revision It's unlikely NOSETXFER works for a revision of drive but doesn't for another and pioneer doesn't seem to be fixing firmwares for the affected drives. Apply NOSETXFER to the affected pioneer drives regardless of firmware revision. http://article.gmane.org/gmane.linux.ide/49734 Signed-off-by: Tejun Heo Reported-by: fl-00@gmx.de Signed-off-by: Jeff Garzik

libata: Power off empty ports

2011-05-20T00:50:53Z

Give users the option of completely powering off unoccupied SATA ports using the existing min_power link_power_management_policy option. When the use selects this option on an empty port, we will power the port off by setting DET to off. For occupied ports, behavior is unchanged. Signed-off-by: Kristen Carlson Accardi Signed-off-by: Jeff Garzik

libata: Pioneer DVR-216D can't do SETXFER

2011-04-24T15:34:05Z

Commit 4a5610a04d415ed94af75bb1159d2621d62c8328 fixed an issue with the Pioneer DVR-212D not handling SETXFER correctly. An openSUSE user reported a similar issue with his DVR-216D that the NOSETXFER horkage worked around for him as well. This patch adds the DVR-216D (1.08) to the horkage list for NOSETXFER. The issue was reported at: https://bugzilla.novell.com/show_bug.cgi?id=679143 Reported-by: Volodymyr Kyrychenko Signed-off-by: Jeff Mahoney Signed-off-by: Jeff Garzik

ahci: don't enable port irq before handler is registered

2011-04-24T15:34:05Z

The ahci_pmp_attach() & ahci_pmp_detach() unmask port irqs, but they are also called during port initialization, before ahci host irq handler is registered. On ce4100 platform, this sometimes triggers "irq 4: nobody cared" message when loading driver. Fixed this by not touching the register if the port is in frozen state, and mark all uninitialized port as frozen. Signed-off-by: Maxime Bizon Acked-by: Tejun Heo Cc: stable@kernel.org Signed-off-by: Jeff Garzik

Fix common misspellings

2011-03-31T14:26:23Z

Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi

[libata] trivial: trim trailing whitespace for drivers/ata/*.[ch]

2011-03-02T07:36:45Z

libata: plumb sas port scan into standard libata paths

2011-03-02T07:36:45Z

The function ata_sas_port_init() has always really done its own thing. However, as a precursor to moving to the libata new eh, it has to be properly using the standard libata scan paths. This means separating the current libata scan paths into pieces which can be shared with libsas and pieces which cant (really just the async call and the host scan). Signed-off-by: James Bottomley Signed-off-by: Jeff Garzik

libata: DVR-212D can't do SETXFER DVD-RW DVR-212D

2011-01-28T08:16:04Z

PIONEER DVR-212D can't do SETXFER like its sibling DVRTD08. Add ATA_HORKAGE_NOSETXFER for it. Reported in bko#27502. https://bugzilla.kernel.org/show_bug.cgi?id=27502 Signed-off-by: Francesco Antonacci Acked-by: Tejun Heo Signed-off-by: Jeff Garzik