user/sven/linux.git/drivers/ata/libata.h, branch v6.2.7

ata: libata: only set sense valid flag if sense data is valid

2022-10-17T02:31:52Z

While this shouldn't be needed if all devices that claim that they support NCQ autosense (ata_id_has_ncq_autosense()) and/or the sense data reporting feature (ata_id_has_sense_reporting()), actually supported those features. However, there might be some old ATA devices that either have these bits set, even when they don't support those features, or they simply return malformed data when using those features. These devices should be quirked, but in order to try to minimize the impact for the users of these such devices, it was suggested by Damien Le Moal that it might be a good idea to sanity check the sense data received from the device. If the sense data looks bogus, then the sense data is never added to the scsi_cmnd command. Introduce a new function, ata_scsi_sense_is_valid(), and use it in all places where sense data is received from the device. Suggested-by: Damien Le Moal Signed-off-by: Niklas Cassel Signed-off-by: Damien Le Moal

ata: libata-core: Simplify ata_build_rw_tf()

2022-08-25T22:46:08Z

Since ata_build_rw_tf() is only called from ata_scsi_rw_xlat() with the tf, dev and tag arguments obtained from the queued command structure, we can simplify the interface of ata_build_rw_tf() by passing directly the qc structure as argument. Furthermore, since ata_scsi_rw_xlat() is never used for internal commands, we can also remove the internal tag check for the NCQ case. Signed-off-by: Damien Le Moal

ata: libata-core: improve parameter names for ata_dev_set_feature()

2022-08-17T16:40:42Z

ata_dev_set_feature() is currently used for enabling/disabling any ATA feature, e.g. SETFEATURES_SPINUP and SETFEATURE_SENSE_DATA, i.e. it is not only used to enable/disable SATA specific features. For most features, the enable/disable bit is specified in the subcommand specific field "count". It is only for the specific subcommands "Enable SATA feature" (0x10) and "Disable SATA feature" (0x90) where the field "count" is used to specify a feature instead of enable/disable. The parameter names for this function are thus quite misleading. Rename the parameter names to be more generic and in line with ACS-5, and remove the references to "SATA FEATURES" in the kernel-doc. Signed-off-by: Niklas Cassel Signed-off-by: Damien Le Moal

ata: libata-eh: fix sloppy result type of ata_internal_cmd_timeout()

2022-06-19T23:21:57Z

ata_internal_cmd_timeout() returns *unsigned long* timeout in ms, however ata_exec_internal_sg() passes that timeout to msecs_to_jiffies() that takes just *unsigned int*. Change ata_internal_cmd_timeout()'s result type to *unsigned int* as well, also updating the *struct* ata_eh_cmd_timeout_ent and the command timeout tables -- all timeouts fit into *unsigned int* but we have to change ULONG_MAX to UINT_MAX... Signed-off-by: Sergey Shtylyov Signed-off-by: Damien Le Moal

ata: libata-core: fix sloppy parameter type in ata_exec_internal[_sg]()

2022-06-19T23:21:57Z

Make the 'timeout' parameter to ata_exec_internal_sg() *unsigned int* as msecs_to_jiffies() that it calls takes just *unsigned int* for the time in milliseconds. Then follow the suit with ata_exec_internal(), its only caller; also fix up ata_dev_set_feature(), the only ata_exec_internal()'s caller that explicitly passes *unsigned long* variable for timeout... Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Signed-off-by: Sergey Shtylyov Signed-off-by: Damien Le Moal

ata: libata-core: make ata_exec_internal_sg() static

2022-06-17T07:45:23Z

ata_exec_internal_sg() is only called by ata_exec_internal() further in the same file, so we can make it *static* and remove its prototype from drivers/ata/libata.h... Suggested-by: Damien Le Moal Signed-off-by: Sergey Shtylyov Signed-off-by: Damien Le Moal

libata: Improve ATA queued command allocation

2022-04-11T00:27:44Z

Improve ATA queued command allocation as follows: - For attaining a qc tag for a SAS host we need to allocate a bit in ata_port.sas_tag_allocated bitmap. However we already have a unique tag per device in range [0, ATA_MAX_QUEUE -1] in the scsi cmnd budget token, so just use that instead. - It is a bit pointless to have ata_qc_new_init() in libata-core.c since it pokes scsi internals, so inline it in ata_scsi_qc_new() (in libata-scsi.c). Also update Doc accordingly. - Use standard SCSI helpers set_host_byte() and set_status_byte() in ata_scsi_qc_new(). Christoph Hellwig originally contributed the change to inline ata_qc_new_init(). Signed-off-by: John Garry Reviewed-by: Christoph Hellwig Signed-off-by: Damien Le Moal

ata: libata-acpi: kill ata_acpi_on_suspend()

2022-02-02T07:56:49Z

Since the commit c05e6ff035c1b25d17364a685432 ("libata-acpi: implement and use ata_acpi_init_gtm()") ata_acpi_on_suspend() just returns 0, so its call from ata_eh_handle_port_suspend() doesn't make sense anymore. Remove the function completely, at last... Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Signed-off-by: Sergey Shtylyov Signed-off-by: Damien Le Moal

ata: libata: remove pointless VPRINTK() calls

2022-01-05T10:33:01Z

Most of the information is already covered by tracepoints (if not downright pointless), so remove the VPRINTK() calls. And while we're at it, remove ata_scsi_dump_cdb(), too, as this information can be retrieved from scsi tracing. Signed-off-by: Hannes Reinecke Signed-off-by: Damien Le Moal

ata: libata: revamp ata_get_cmd_descript()