user/sven/linux.git/drivers/ata, branch v4.14.26

ahci: Add Intel Cannon Lake PCH-H PCI ID

2018-02-16T19:22:59Z

commit f919dde0772a894c693a1eeabc77df69d6a9b937 upstream. Add Intel Cannon Lake PCH-H PCI ID to the list of supported controllers. Signed-off-by: Mika Westerberg Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman

ahci: Add PCI ids for Intel Bay Trail, Cherry Trail and Apollo Lake AHCI

2018-02-16T19:22:59Z

commit 998008b779e424bd7513c434d0ab9c1268459009 upstream. Add PCI ids for Intel Bay Trail, Cherry Trail and Apollo Lake AHCI SATA controllers. This commit is a preparation patch for allowing a different default sata link powermanagement policy for mobile chipsets. Signed-off-by: Hans de Goede Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman

ahci: Annotate PCI ids for mobile Intel chipsets as such

2018-02-16T19:22:59Z

commit ca1b4974bd237f2373b0e980b11957aac3499b56 upstream. Intel uses different SATA PCI ids for the Desktop and Mobile SKUs of their chipsets. For older models the comment describing which chipset the PCI id is for, aksi indicates when we're dealing with a mobile SKU. Extend the comments for recent chipsets to also indicate mobile SKUs. The information this commit adds comes from Intel's chipset datasheets. This commit is a preparation patch for allowing a different default sata link powermanagement policy for mobile chipsets. Signed-off-by: Hans de Goede Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman

libata: apply MAX_SEC_1024 to all LITEON EP1 series devices

2018-01-23T18:58:18Z

commit db5ff909798ef0099004ad50a0ff5fde92426fd1 upstream. LITEON EP1 has the same timeout issues as CX1 series devices. Revert max_sectors to the value of 1024. Fixes: e0edc8c54646 ("libata: apply MAX_SEC_1024 to all CX1-JB*-HP devices") Signed-off-by: Xinyu Lin Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman

ata: fixes kernel crash while tracing ata_eh_link_autopsy event

2017-11-30T08:40:47Z

commit f1601113ddc0339a745e702f4fb1ca37d4875e65 upstream. When tracing ata link error event, the kernel crashes when the disk is removed due to NULL pointer access by trace_ata_eh_link_autopsy API. This occurs as the dev is NULL when the disk disappeared. This patch fixes this crash by calling trace_ata_eh_link_autopsy only if "dev" is not NULL. v2 changes: Removed direct passing "link" pointer instead of "dev" in trace API. Signed-off-by: Rameshwar Prasad Sahu Signed-off-by: Tejun Heo Fixes: 255c03d15a29 ("libata: Add tracepoints") Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

ahci: don't ignore result code of ahci_reset_controller()

2017-10-02T19:21:30Z

ahci_pci_reset_controller() calls ahci_reset_controller(), which may fail, but ignores the result code and always returns success. This may result in failures like below ahci 0000:02:00.0: version 3.0 ahci 0000:02:00.0: enabling device (0000 -> 0003) ahci 0000:02:00.0: SSS flag set, parallel bus scan disabled ahci 0000:02:00.0: controller reset failed (0xffffffff) ahci 0000:02:00.0: failed to stop engine (-5) ... repeated many times ... ahci 0000:02:00.0: failed to stop engine (-5) Unable to handle kernel paging request at virtual address ffff0000093f9018 ... PC is at ahci_stop_engine+0x5c/0xd8 [libahci] LR is at ahci_deinit_port.constprop.12+0x1c/0xc0 [libahci] ... [] ahci_stop_engine+0x5c/0xd8 [libahci] [] ahci_deinit_port.constprop.12+0x1c/0xc0 [libahci] [] ahci_init_controller+0x80/0x168 [libahci] [] ahci_pci_init_controller+0x60/0x68 [ahci] [] ahci_init_one+0x75c/0xd88 [ahci] [] local_pci_probe+0x3c/0xb8 [] pci_device_probe+0x138/0x170 [] driver_probe_device+0x2dc/0x458 [] __driver_attach+0x114/0x118 [] bus_for_each_dev+0x60/0xa0 [] driver_attach+0x20/0x28 [] bus_add_driver+0x1f0/0x2a8 [] driver_register+0x60/0xf8 [] __pci_register_driver+0x3c/0x48 [] ahci_pci_driver_init+0x1c/0x1000 [ahci] [] do_one_initcall+0x38/0x120 where an obvious hardware level failure results in an unnecessary 15 second delay and a subsequent crash. So record the result code of ahci_reset_controller() and relay it, rather than ignoring it. Signed-off-by: Ard Biesheuvel Signed-off-by: Tejun Heo

ata_piix: Add Fujitsu-Siemens Lifebook S6120 to short cable IDs

2017-09-19T03:32:02Z

Fujitsu-Siemens Lifebook S6120 misdetects the cable type for some drives. The problematic one in this case is an mSATA SSD hooked up via a mSATA->PATA bridge. With regular hard disks the detection seems to work correctly. Strangely an older Lifebook model (S6020) detects the cable as 80c with the mSATA SSD, even if using the exact same flex cable. Cc: Tejun Heo Signed-off-by: Ville Syrjälä Signed-off-by: Tejun Heo

ata: avoid gcc-7 warning in ata_timing_quantize

2017-09-07T20:33:00Z

gcc-7 warns about the result of a constant multiplication used as a boolean: drivers/ata/libata-core.c: In function 'ata_timing_quantize': drivers/ata/libata-core.c:3164:30: warning: '*' in boolean context, suggest '&&' instead [-Wint-in-bool-context] This slightly rearranges the macro to simplify the code and avoid the warning at the same time. Signed-off-by: Arnd Bergmann Signed-off-by: Tejun Heo

Merge branch 'for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata

2017-09-07T05:41:21Z

Pull libata updates from Tejun Heo: "Except for the ahci fix that fixes a boot issue, nothing major in this pull request. Some new platform controller support and device specific changes" * 'for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata: zpodd: make arrays cdb static, reduces object code size ahci: don't use MSI for devices with the silly Intel NVMe remapping scheme dt-bindings: ata: add DT bindings for MediaTek SATA controller ata: mediatek: add support for MediaTek SATA controller pata_octeon_cf: use of_property_read_{bool|u32}() cs5536: add support for IDE controller variant ata: sata_gemini: Introduce explicit IDE pin control ata: sata_gemini: Retire custom pin control ata: ahci_platform: Add shutdown handler ata: sata_gemini: explicitly request exclusive reset control ata: Drop unnecessary static ata: Convert to using %pOF instead of full_name