user/sven/linux.git/drivers/ata, branch v4.14.263

libata: if T_LENGTH is zero, dma direction should be DMA_NONE

2021-12-22T08:18:00Z

commit 5da5231bb47864e5dd6c6731151e98b6ee498827 upstream. Avoid data corruption by rejecting pass-through commands where T_LENGTH is zero (No data is transferred) and the dma direction is not DMA_NONE. Cc: Reported-by: syzkaller Signed-off-by: George Kennedy Signed-off-by: Damien Le Moal Signed-off-by: Greg Kroah-Hartman

libata: add horkage for ASMedia 1092

2021-12-14T09:16:55Z

commit a66307d473077b7aeba74e9b09c841ab3d399c2d upstream. The ASMedia 1092 has a configuration mode which will present a dummy device; sadly the implementation falsely claims to provide a device with 100M which doesn't actually exist. So disable this device to avoid errors during boot. Cc: stable@vger.kernel.org Signed-off-by: Hannes Reinecke Signed-off-by: Damien Le Moal Signed-off-by: Greg Kroah-Hartman

sata_fsl: fix warning in remove_proc_entry when rmmod sata_fsl

2021-12-08T07:46:54Z

commit 6f48394cf1f3e8486591ad98c11cdadb8f1ef2ad upstream. Trying to remove the fsl-sata module in the PPC64 GNU/Linux leads to the following warning: ------------[ cut here ]------------ remove_proc_entry: removing non-empty directory 'irq/69', leaking at least 'fsl-sata[ff0221000.sata]' WARNING: CPU: 3 PID: 1048 at fs/proc/generic.c:722 .remove_proc_entry+0x20c/0x220 IRQMASK: 0 NIP [c00000000033826c] .remove_proc_entry+0x20c/0x220 LR [c000000000338268] .remove_proc_entry+0x208/0x220 Call Trace: .remove_proc_entry+0x208/0x220 (unreliable) .unregister_irq_proc+0x104/0x140 .free_desc+0x44/0xb0 .irq_free_descs+0x9c/0xf0 .irq_dispose_mapping+0x64/0xa0 .sata_fsl_remove+0x58/0xa0 [sata_fsl] .platform_drv_remove+0x40/0x90 .device_release_driver_internal+0x160/0x2c0 .driver_detach+0x64/0xd0 .bus_remove_driver+0x70/0xf0 .driver_unregister+0x38/0x80 .platform_driver_unregister+0x14/0x30 .fsl_sata_driver_exit+0x18/0xa20 [sata_fsl] ---[ end trace 0ea876d4076908f5 ]--- The driver creates the mapping by calling irq_of_parse_and_map(), so it also has to dispose the mapping. But the easy way out is to simply use platform_get_irq() instead of irq_of_parse_map(). Also we should adapt return value checking and propagate error values. In this case the mapping is not managed by the device but by the of core, so the device has not to dispose the mapping. Fixes: faf0b2e5afe7 ("drivers/ata: add support to Freescale 3.0Gbps SATA Controller") Cc: stable@vger.kernel.org Reported-by: Hulk Robot Signed-off-by: Baokun Li Reviewed-by: Sergei Shtylyov Signed-off-by: Damien Le Moal Signed-off-by: Greg Kroah-Hartman

sata_fsl: fix UAF in sata_fsl_port_stop when rmmod sata_fsl

2021-12-08T07:46:54Z

commit 6c8ad7e8cf29eb55836e7a0215f967746ab2b504 upstream. When the `rmmod sata_fsl.ko` command is executed in the PPC64 GNU/Linux, a bug is reported: ================================================================== BUG: Unable to handle kernel data access on read at 0x80000800805b502c Oops: Kernel access of bad area, sig: 11 [#1] NIP [c0000000000388a4] .ioread32+0x4/0x20 LR [80000000000c6034] .sata_fsl_port_stop+0x44/0xe0 [sata_fsl] Call Trace: .free_irq+0x1c/0x4e0 (unreliable) .ata_host_stop+0x74/0xd0 [libata] .release_nodes+0x330/0x3f0 .device_release_driver_internal+0x178/0x2c0 .driver_detach+0x64/0xd0 .bus_remove_driver+0x70/0xf0 .driver_unregister+0x38/0x80 .platform_driver_unregister+0x14/0x30 .fsl_sata_driver_exit+0x18/0xa20 [sata_fsl] .__se_sys_delete_module+0x1ec/0x2d0 .system_call_exception+0xfc/0x1f0 system_call_common+0xf8/0x200 ================================================================== The triggering of the BUG is shown in the following stack: driver_detach device_release_driver_internal __device_release_driver drv->remove(dev) --> platform_drv_remove/platform_remove drv->remove(dev) --> sata_fsl_remove iounmap(host_priv->hcr_base); <---- unmap kfree(host_priv); <---- free devres_release_all release_nodes dr->node.release(dev, dr->data) --> ata_host_stop ap->ops->port_stop(ap) --> sata_fsl_port_stop ioread32(hcr_base + HCONTROL) <---- UAF host->ops->host_stop(host) The iounmap(host_priv->hcr_base) and kfree(host_priv) functions should not be executed in drv->remove. These functions should be executed in host_stop after port_stop. Therefore, we move these functions to the new function sata_fsl_host_stop and bind the new function to host_stop. Fixes: faf0b2e5afe7 ("drivers/ata: add support to Freescale 3.0Gbps SATA Controller") Cc: stable@vger.kernel.org Reported-by: Hulk Robot Signed-off-by: Baokun Li Reviewed-by: Sergei Shtylyov Signed-off-by: Damien Le Moal Signed-off-by: Greg Kroah-Hartman

libata: fix checking of DMA state

2021-11-26T10:40:24Z

commit f971a85439bd25dc7b4d597cf5e4e8dc7ffc884b upstream. Checking if DMA is enabled should be done via the ata_dma_enabled helper function, since the init state 0xff indicates disabled. This meant that ATA_CMD_READ_LOG_DMA_EXT was used and probed for before DMA was enabled, which caused hangs for some combinations of controllers and devices. It might also have caused it to be incorrectly disabled as broken, but there have been no reports of that. Cc: stable@vger.kernel.org BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=195895 Signed-off-by: Reimar Döffinger Tested-by: Paul Menzel Signed-off-by: Damien Le Moal Signed-off-by: Greg Kroah-Hartman

libata: fix read log timeout value

2021-11-26T10:40:20Z

commit 68dbbe7d5b4fde736d104cbbc9a2fce875562012 upstream. Some ATA drives are very slow to respond to READ_LOG_EXT and READ_LOG_DMA_EXT commands issued from ata_dev_configure() when the device is revalidated right after resuming a system or inserting the ATA adapter driver (e.g. ahci). The default 5s timeout (ATA_EH_CMD_DFL_TIMEOUT) used for these commands is too short, causing errors during the device configuration. Ex: ... ata9: SATA max UDMA/133 abar m524288@0x9d200000 port 0x9d200400 irq 209 ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata9.00: ATA-9: XXX XXXXXXXXXXXXXXX, XXXXXXXX, max UDMA/133 ata9.00: qc timeout (cmd 0x2f) ata9.00: Read log page 0x00 failed, Emask 0x4 ata9.00: Read log page 0x00 failed, Emask 0x40 ata9.00: NCQ Send/Recv Log not supported ata9.00: Read log page 0x08 failed, Emask 0x40 ata9.00: 27344764928 sectors, multi 16: LBA48 NCQ (depth 32), AA ata9.00: Read log page 0x00 failed, Emask 0x40 ata9.00: ATA Identify Device Log not supported ata9.00: failed to set xfermode (err_mask=0x40) ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300) ata9.00: configured for UDMA/133 ... The timeout error causes a soft reset of the drive link, followed in most cases by a successful revalidation as that give enough time to the drive to become fully ready to quickly process the read log commands. However, in some cases, this also fails resulting in the device being dropped. Fix this by using adding the ata_eh_revalidate_timeouts entries for the READ_LOG_EXT and READ_LOG_DMA_EXT commands. This defines a timeout increased to 15s, retriable one time. Reported-by: Geert Uytterhoeven Tested-by: Geert Uytterhoeven Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Signed-off-by: Greg Kroah-Hartman

ata: sata_mv: Fix the error handling of mv_chip_id()

2021-11-02T17:25:11Z

commit a0023bb9dd9bc439d44604eeec62426a990054cd upstream. mv_init_host() propagates the value returned by mv_chip_id() which in turn gets propagated by mv_pci_init_one() and hits local_pci_probe(). During the process of driver probing, the probe function should return < 0 for failure, otherwise, the kernel will treat value > 0 as success. Since this is a bug rather than a recoverable runtime error we should use dev_alert() instead of dev_err(). Signed-off-by: Zheyu Ma Signed-off-by: Damien Le Moal Signed-off-by: Greg Kroah-Hartman

pata_legacy: fix a couple uninitialized variable bugs

2021-10-20T08:42:05Z

commit 013923477cb311293df9079332cf8b806ed0e6f2 upstream. The last byte of "pad" is used without being initialized. Fixes: 55dba3120fbc ("libata: update ->data_xfer hook for ATAPI") Signed-off-by: Dan Carpenter Signed-off-by: Damien Le Moal Signed-off-by: Greg Kroah-Hartman

libata: Add ATA_HORKAGE_NO_NCQ_ON_ATI for Samsung 860 and 870 SSD.

2021-10-09T12:09:46Z

commit 7a8526a5cd51cf5f070310c6c37dd7293334ac49 upstream. Many users are reporting that the Samsung 860 and 870 SSD are having various issues when combined with AMD/ATI (vendor ID 0x1002) SATA controllers and only completely disabling NCQ helps to avoid these issues. Always disabling NCQ for Samsung 860/870 SSDs regardless of the host SATA adapter vendor will cause I/O performance degradation with well behaved adapters. To limit the performance impact to ATI adapters, introduce the ATA_HORKAGE_NO_NCQ_ON_ATI flag to force disable NCQ only for these adapters. Also, two libata.force parameters (noncqati and ncqati) are introduced to disable and enable the NCQ for the system which equipped with ATI SATA adapter and Samsung 860 and 870 SSDs. The user can determine NCQ function to be enabled or disabled according to the demand. After verifying the chipset from the user reports, the issue appears on AMD/ATI SB7x0/SB8x0/SB9x0 SATA Controllers and does not appear on recent AMD SATA adapters. The vendor ID of ATI should be 0x1002. Therefore, ATA_HORKAGE_NO_NCQ_ON_AMD was modified to ATA_HORKAGE_NO_NCQ_ON_ATI. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201693 Signed-off-by: Kate Hsuan Reviewed-by: Hans de Goede Link: https://lore.kernel.org/r/20210903094411.58749-1-hpa@redhat.com Reviewed-by: Martin K. Petersen Signed-off-by: Jens Axboe Cc: Krzysztof Olędzki Signed-off-by: Greg Kroah-Hartman

ata: sata_dwc_460ex: No need to call phy_exit() befre phy_init()

2021-09-22T09:45:29Z

[ Upstream commit 3ad4a31620355358316fa08fcfab37b9d6c33347 ] Last change to device managed APIs cleaned up error path to simple phy_exit() call, which in some cases has been executed with NULL parameter. This per se is not a problem, but rather logical misconception: no need to free resource when it's for sure has not been allocated yet. Fix the driver accordingly. Signed-off-by: Andy Shevchenko Link: https://lore.kernel.org/r/20210727125130.19977-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin