user/sven/linux.git/drivers/ata, branch v4.4.287

libata: add ATA_HORKAGE_NO_NCQ_TRIM for Samsung 860 and 870 SSDs

2021-09-22T09:41:23Z

commit 8a6430ab9c9c87cb64c512e505e8690bbaee190b upstream. Commit ca6bfcb2f6d9 ("libata: Enable queued TRIM for Samsung SSD 860") limited the existing ATA_HORKAGE_NO_NCQ_TRIM quirk from "Samsung SSD 8*", covering all Samsung 800 series SSDs, to only apply to "Samsung SSD 840*" and "Samsung SSD 850*" series based on information from Samsung. But there is a large number of users which is still reporting issues with the Samsung 860 and 870 SSDs combined with Intel, ASmedia or Marvell SATA controllers and all reporters also report these problems going away when disabling queued trims. Note that with AMD SATA controllers users are reporting even worse issues and only completely disabling NCQ helps there, this will be addressed in a separate patch. Fixes: ca6bfcb2f6d9 ("libata: Enable queued TRIM for Samsung SSD 860") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=203475 Cc: stable@vger.kernel.org Cc: Kate Hsuan Signed-off-by: Hans de Goede Reviewed-by: Damien Le Moal Reviewed-by: Martin K. Petersen Link: https://lore.kernel.org/r/20210823095220.30157-1-hdegoede@redhat.com Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

libata: fix ata_host_start()

2021-09-22T09:41:19Z

[ Upstream commit 355a8031dc174450ccad2a61c513ad7222d87a97 ] The loop on entry of ata_host_start() may not initialize host->ops to a non NULL value. The test on the host_stop field of host->ops must then be preceded by a check that host->ops is not NULL. Reported-by: kernel test robot Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Link: https://lore.kernel.org/r/20210816014456.2191776-3-damien.lemoal@wdc.com Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

ata: ahci_sunxi: Disable DIPM

2021-07-20T14:22:39Z

commit f6bca4d91b2ea052e917cca3f9d866b5cc1d500a upstream. DIPM is unsupported or broken on sunxi. Trying to enable the power management policy med_power_with_dipm on an Allwinner A20 SoC based board leads to immediate I/O errors and the attached SATA disk disappears from the /dev filesystem. A reset (power cycle) is required to make the SATA controller or disk work again. The A10 and A20 SoC data sheets and manuals don't mention DIPM at all [1], so it's fair to assume that it's simply not supported. But even if it was, it should be considered broken and best be disabled in the ahci_sunxi driver. [1] https://github.com/allwinner-zh/documents/tree/master/ Fixes: c5754b5220f0 ("ARM: sunxi: Add support for Allwinner SUNXi SoCs sata to ahci_platform") Cc: stable@vger.kernel.org Signed-off-by: Timo Sigurdsson Tested-by: Timo Sigurdsson Link: https://lore.kernel.org/r/20210614072539.3307-1-public_timo.s@silentcreek.de Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

pata_ep93xx: fix deferred probing

2021-07-20T14:22:33Z

[ Upstream commit 5c8121262484d99bffb598f39a0df445cecd8efb ] The driver overrides the error codes returned by platform_get_irq() to -ENXIO, so if it returns -EPROBE_DEFER, the driver would fail the probe permanently instead of the deferred probing. Propagate the error code upstream, as it should have been done from the start... Fixes: 2fff27512600 ("PATA host controller driver for ep93xx") Signed-off-by: Sergey Shtylyov Link: https://lore.kernel.org/r/509fda88-2e0d-2cc7-f411-695d7e94b136@omprussia.ru Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

pata_octeon_cf: avoid WARN_ON() in ata_host_activate()

2021-07-20T14:22:33Z

[ Upstream commit bfc1f378c8953e68ccdbfe0a8c20748427488b80 ] Iff platform_get_irq() fails (or returns IRQ0) and thus the polling mode has to be used, ata_host_activate() hits the WARN_ON() due to 'irq_handler' parameter being non-NULL if the polling mode is selected. Let's only set the pointer to the driver's IRQ handler if platform_get_irq() returns a valid IRQ # -- this should avoid the unnecessary WARN_ON()... Fixes: 43f01da0f279 ("MIPS/OCTEON/ata: Convert pata_octeon_cf.c to use device tree.") Signed-off-by: Sergey Shtylyov Link: https://lore.kernel.org/r/3a241167-f84d-1d25-5b9b-be910afbe666@omp.ru Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

pata_rb532_cf: fix deferred probing

2021-07-20T14:22:33Z

[ Upstream commit 2d3a62fbae8e5badc2342388f65ab2191c209cc0 ] The driver overrides the error codes returned by platform_get_irq() to -ENOENT, so if it returns -EPROBE_DEFER, the driver would fail the probe permanently instead of the deferred probing. Switch to propagating the error code upstream, still checking/overriding IRQ0 as libata regards it as "no IRQ" (thus polling) anyway... Fixes: 9ec36cafe43b ("of/irq: do irq resolution in platform_get_irq") Signed-off-by: Sergey Shtylyov Link: https://lore.kernel.org/r/771ced55-3efb-21f5-f21c-b99920aae611@omprussia.ru Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

sata_highbank: fix deferred probing

2021-07-20T14:22:33Z

[ Upstream commit 4a24efa16e7db02306fb5db84518bb0a7ada5a46 ] The driver overrides the error codes returned by platform_get_irq() to -EINVAL, so if it returns -EPROBE_DEFER, the driver would fail the probe permanently instead of the deferred probing. Switch to propagating the error code upstream, still checking/overriding IRQ0 as libata regards it as "no IRQ" (thus polling) anyway... Fixes: 9ec36cafe43b ("of/irq: do irq resolution in platform_get_irq") Signed-off-by: Sergey Shtylyov Link: https://lore.kernel.org/r/105b456d-1199-f6e9-ceb7-ffc5ba551d1a@omprussia.ru Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

ata: libahci_platform: fix IRQ check

2021-05-22T08:38:24Z

[ Upstream commit b30d0040f06159de97ad9c0b1536f47250719d7d ] Iff platform_get_irq() returns 0, ahci_platform_init_host() would return 0 early (as if the call was successful). Override IRQ0 with -EINVAL instead as the 'libata' regards 0 as "no IRQ" (thus polling) anyway... Fixes: c034640a32f8 ("ata: libahci: properly propagate return value of platform_get_irq()") Signed-off-by: Sergey Shtylyov Link: https://lore.kernel.org/r/4448c8cc-331f-2915-0e17-38ea34e251c8@omprussia.ru Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

sata_mv: add IRQ checks

2021-05-22T08:38:24Z

[ Upstream commit e6471a65fdd5efbb8dd2732dd0f063f960685ceb ] The function mv_platform_probe() neglects to check the results of the calls to platform_get_irq() and irq_of_parse_and_map() and blithely passes them to ata_host_activate() -- while the latter only checks for IRQ0 (treating it as a polling mode indicattion) and passes the negative values to devm_request_irq() causing it to fail as it takes unsigned values for the IRQ #... Add to mv_platform_probe() the proper IRQ checks to pass the positive IRQ #s to ata_host_activate(), propagate upstream the negative error codes, and override the IRQ0 with -EINVAL (as we don't want the polling mode). Fixes: f351b2d638c3 ("sata_mv: Support SoC controllers") Signed-off-by: Sergey Shtylyov Link: https://lore.kernel.org/r/51436f00-27a1-e20b-c21b-0e817e0a7c86@omprussia.ru Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

pata_ipx4xx_cf: fix IRQ check

2021-05-22T08:38:24Z

[ Upstream commit e379b40cc0f179403ce0b82b7e539f635a568da5 ] The driver's probe() method is written as if platform_get_irq() returns 0 on error, while actually it returns a negative error code (with all the other values considered valid IRQs). Rewrite the driver's IRQ checking code to pass the positive IRQ #s to ata_host_activate(), propagate errors upstream, and treat IRQ0 as error, returning -EINVAL, as the libata code treats 0 as an indication that polling should be used anyway... Fixes: 0df0d0a0ea9f ("[libata] ARM: add ixp4xx PATA driver") Signed-off-by: Sergey Shtylyov Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin