user/sven/linux.git/drivers/ata, branch v4.9.256

ata: sata_rcar: Fix DMA boundary mask

2020-11-10T09:23:51Z

commit df9c590986fdb6db9d5636d6cd93bc919c01b451 upstream. Before commit 9495b7e92f716ab2 ("driver core: platform: Initialize dma_parms for platform devices"), the R-Car SATA device didn't have DMA parameters. Hence the DMA boundary mask supplied by its driver was silently ignored, as __scsi_init_queue() doesn't check the return value of dma_set_seg_boundary(), and the default value of 0xffffffff was used. Now the device has gained DMA parameters, the driver-supplied value is used, and the following warning is printed on Salvator-XS: DMA-API: sata_rcar ee300000.sata: mapping sg segment across boundary [start=0x00000000ffffe000] [end=0x00000000ffffefff] [boundary=0x000000001ffffffe] WARNING: CPU: 5 PID: 38 at kernel/dma/debug.c:1233 debug_dma_map_sg+0x298/0x300 (the range of start/end values depend on whether IOMMU support is enabled or not) The issue here is that SATA_RCAR_DMA_BOUNDARY doesn't have bit 0 set, so any typical end value, which is odd, will trigger the check. Fix this by increasing the DMA boundary value by 1. This also fixes the following WRITE DMA EXT timeout issue: # dd if=/dev/urandom of=/mnt/de1/file1-1024M bs=1M count=1024 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen ata1.00: failed command: WRITE DMA EXT ata1.00: cmd 35/00:00:00:e6:0c/00:0a:00:00:00/e0 tag 0 dma 1310720 out res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) ata1.00: status: { DRDY } as seen by Shimoda-san since commit 429120f3df2dba2b ("block: fix splitting segments on boundary masks"). Fixes: 8bfbeed58665dbbf ("sata_rcar: correct 'sata_rcar_sht'") Fixes: 9495b7e92f716ab2 ("driver core: platform: Initialize dma_parms for platform devices") Fixes: 429120f3df2dba2b ("block: fix splitting segments on boundary masks") Signed-off-by: Geert Uytterhoeven Tested-by: Lad Prabhakar Tested-by: Yoshihiro Shimoda Reviewed-by: Christoph Hellwig Reviewed-by: Greg Kroah-Hartman Reviewed-by: Sergei Shtylyov Reviewed-by: Ulf Hansson Cc: stable Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

ata: sata_mv, avoid trigerrable BUG_ON

2020-10-01T18:40:19Z

commit e9f691d899188679746eeb96e6cb520459eda9b4 upstream. There are several reports that the BUG_ON on unsupported command in mv_qc_prep can be triggered under some circumstances: https://bugzilla.suse.com/show_bug.cgi?id=1110252 https://serverfault.com/questions/888897/raid-problems-after-power-outage https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1652185 https://bugs.centos.org/view.php?id=14998 Let sata_mv handle the failure gracefully: warn about that incl. the failed command number and return an AC_ERR_INVALID error. We can do that now thanks to the previous patch. Remove also the long-standing FIXME. [v2] use %.2x as commands are defined as hexa. Signed-off-by: Jiri Slaby Cc: Jens Axboe Cc: linux-ide@vger.kernel.org Cc: Sergei Shtylyov Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

ata: make qc_prep return ata_completion_errors

2020-10-01T18:40:19Z

commit 95364f36701e62dd50eee91e1303187fd1a9f567 upstream. In case a driver wants to return an error from qc_prep, return enum ata_completion_errors. sata_mv is one of those drivers -- see the next patch. Other drivers return the newly defined AC_ERR_OK. [v2] use enum ata_completion_errors and AC_ERR_OK. Signed-off-by: Jiri Slaby Cc: Jens Axboe Cc: linux-ide@vger.kernel.org Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

libata: implement ATA_HORKAGE_MAX_TRIM_128M and apply to Sandisks

2020-09-12T09:47:37Z

commit 3b5455636fe26ea21b4189d135a424a6da016418 upstream. All three generations of Sandisk SSDs lock up hard intermittently. Experiments showed that disabling NCQ lowered the failure rate significantly and the kernel has been disabling NCQ for some models of SD7's and 8's, which is obviously undesirable. Karthik worked with Sandisk to root cause the hard lockups to trim commands larger than 128M. This patch implements ATA_HORKAGE_MAX_TRIM_128M which limits max trim size to 128M and applies it to all three generations of Sandisk SSDs. Signed-off-by: Tejun Heo Cc: Karthik Shivaram Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

ata/libata: Fix usage of page address by page_address in ata_scsi_mode_select_xlat function

2020-06-30T19:38:43Z

[ Upstream commit f650ef61e040bcb175dd8762164b00a5d627f20e ] BUG: KASAN: use-after-free in ata_scsi_mode_select_xlat+0x10bd/0x10f0 drivers/ata/libata-scsi.c:4045 Read of size 1 at addr ffff88803b8cd003 by task syz-executor.6/12621 CPU: 1 PID: 12621 Comm: syz-executor.6 Not tainted 4.19.95 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xac/0xee lib/dump_stack.c:118 print_address_description+0x60/0x223 mm/kasan/report.c:253 kasan_report_error mm/kasan/report.c:351 [inline] kasan_report mm/kasan/report.c:409 [inline] kasan_report.cold+0xae/0x2d8 mm/kasan/report.c:393 ata_scsi_mode_select_xlat+0x10bd/0x10f0 drivers/ata/libata-scsi.c:4045 ata_scsi_translate+0x2da/0x680 drivers/ata/libata-scsi.c:2035 __ata_scsi_queuecmd drivers/ata/libata-scsi.c:4360 [inline] ata_scsi_queuecmd+0x2e4/0x790 drivers/ata/libata-scsi.c:4409 scsi_dispatch_cmd+0x2ee/0x6c0 drivers/scsi/scsi_lib.c:1867 scsi_queue_rq+0xfd7/0x1990 drivers/scsi/scsi_lib.c:2170 blk_mq_dispatch_rq_list+0x1e1/0x19a0 block/blk-mq.c:1186 blk_mq_do_dispatch_sched+0x147/0x3d0 block/blk-mq-sched.c:108 blk_mq_sched_dispatch_requests+0x427/0x680 block/blk-mq-sched.c:204 __blk_mq_run_hw_queue+0xbc/0x200 block/blk-mq.c:1308 __blk_mq_delay_run_hw_queue+0x3c0/0x460 block/blk-mq.c:1376 blk_mq_run_hw_queue+0x152/0x310 block/blk-mq.c:1413 blk_mq_sched_insert_request+0x337/0x6c0 block/blk-mq-sched.c:397 blk_execute_rq_nowait+0x124/0x320 block/blk-exec.c:64 blk_execute_rq+0xc5/0x112 block/blk-exec.c:101 sg_scsi_ioctl+0x3b0/0x6a0 block/scsi_ioctl.c:507 sg_ioctl+0xd37/0x23f0 drivers/scsi/sg.c:1106 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:501 [inline] do_vfs_ioctl+0xae6/0x1030 fs/ioctl.c:688 ksys_ioctl+0x76/0xa0 fs/ioctl.c:705 __do_sys_ioctl fs/ioctl.c:712 [inline] __se_sys_ioctl fs/ioctl.c:710 [inline] __x64_sys_ioctl+0x6f/0xb0 fs/ioctl.c:710 do_syscall_64+0xa0/0x2e0 arch/x86/entry/common.c:293 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45c479 Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fb0e9602c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fb0e96036d4 RCX: 000000000045c479 RDX: 0000000020000040 RSI: 0000000000000001 RDI: 0000000000000003 RBP: 000000000076bfc0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 000000000000046d R14: 00000000004c6e1a R15: 000000000076bfcc Allocated by task 12577: set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc mm/kasan/kasan.c:553 [inline] kasan_kmalloc+0xbf/0xe0 mm/kasan/kasan.c:531 __kmalloc+0xf3/0x1e0 mm/slub.c:3749 kmalloc include/linux/slab.h:520 [inline] load_elf_phdrs+0x118/0x1b0 fs/binfmt_elf.c:441 load_elf_binary+0x2de/0x4610 fs/binfmt_elf.c:737 search_binary_handler fs/exec.c:1654 [inline] search_binary_handler+0x15c/0x4e0 fs/exec.c:1632 exec_binprm fs/exec.c:1696 [inline] __do_execve_file.isra.0+0xf52/0x1a90 fs/exec.c:1820 do_execveat_common fs/exec.c:1866 [inline] do_execve fs/exec.c:1883 [inline] __do_sys_execve fs/exec.c:1964 [inline] __se_sys_execve fs/exec.c:1959 [inline] __x64_sys_execve+0x8a/0xb0 fs/exec.c:1959 do_syscall_64+0xa0/0x2e0 arch/x86/entry/common.c:293 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 12577: set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free+0x129/0x170 mm/kasan/kasan.c:521 slab_free_hook mm/slub.c:1370 [inline] slab_free_freelist_hook mm/slub.c:1397 [inline] slab_free mm/slub.c:2952 [inline] kfree+0x8b/0x1a0 mm/slub.c:3904 load_elf_binary+0x1be7/0x4610 fs/binfmt_elf.c:1118 search_binary_handler fs/exec.c:1654 [inline] search_binary_handler+0x15c/0x4e0 fs/exec.c:1632 exec_binprm fs/exec.c:1696 [inline] __do_execve_file.isra.0+0xf52/0x1a90 fs/exec.c:1820 do_execveat_common fs/exec.c:1866 [inline] do_execve fs/exec.c:1883 [inline] __do_sys_execve fs/exec.c:1964 [inline] __se_sys_execve fs/exec.c:1959 [inline] __x64_sys_execve+0x8a/0xb0 fs/exec.c:1959 do_syscall_64+0xa0/0x2e0 arch/x86/entry/common.c:293 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff88803b8ccf00 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 259 bytes inside of 512-byte region [ffff88803b8ccf00, ffff88803b8cd100) The buggy address belongs to the page: page:ffffea0000ee3300 count:1 mapcount:0 mapping:ffff88806cc03080 index:0xffff88803b8cc780 compound_mapcount: 0 flags: 0x100000000008100(slab|head) raw: 0100000000008100 ffffea0001104080 0000000200000002 ffff88806cc03080 raw: ffff88803b8cc780 00000000800c000b 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88803b8ccf00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88803b8ccf80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff88803b8cd000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88803b8cd080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88803b8cd100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc You can refer to "https://www.lkml.org/lkml/2019/1/17/474" reproduce this error. The exception code is "bd_len = p[3];", "p" value is ffff88803b8cd000 which belongs to the cache kmalloc-512 of size 512. The "page_address(sg_page(scsi_sglist(scmd)))" maybe from sg_scsi_ioctl function "buffer" which allocated by kzalloc, so "buffer" may not page aligned. This also looks completely buggy on highmem systems and really needs to use a kmap_atomic. --Christoph Hellwig To address above bugs, Paolo Bonzini advise to simpler to just make a char array of size CACHE_MPAGE_LEN+8+8+4-2(or just 64 to make it easy), use sg_copy_to_buffer to copy from the sglist into the buffer, and workthere. Signed-off-by: Ye Bin Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

libata: Use per port sync for detach

2020-06-30T19:38:31Z

[ Upstream commit b5292111de9bb70cba3489075970889765302136 ] Commit 130f4caf145c ("libata: Ensure ata_port probe has completed before detach") may cause system freeze during suspend. Using async_synchronize_full() in PM callbacks is wrong, since async callbacks that are already scheduled may wait for not-yet-scheduled callbacks, causes a circular dependency. Instead of using big hammer like async_synchronize_full(), use async cookie to make sure port probe are synced, without affecting other scheduled PM callbacks. Fixes: 130f4caf145c ("libata: Ensure ata_port probe has completed before detach") Suggested-by: John Garry Signed-off-by: Kai-Heng Feng Tested-by: John Garry BugLink: https://bugs.launchpad.net/bugs/1867983 Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

libata: Return correct status in sata_pmp_eh_recover_pm() when ATA_DFLAG_DETACH is set

2020-04-24T05:58:59Z

commit 8305f72f952cff21ce8109dc1ea4b321c8efc5af upstream. During system resume from suspend, this can be observed on ASM1062 PMP controller: ata10.01: SATA link down (SStatus 0 SControl 330) ata10.02: hard resetting link ata10.02: SATA link down (SStatus 0 SControl 330) ata10.00: configured for UDMA/133 Kernel panic - not syncing: stack-protector: Kernel in: sata_pmp_eh_recover+0xa2b/0xa40 CPU: 2 PID: 230 Comm: scsi_eh_9 Tainted: P OE #49-Ubuntu Hardware name: System manufacturer System Product 1001 12/10/2017 Call Trace: dump_stack+0x63/0x8b panic+0xe4/0x244 ? sata_pmp_eh_recover+0xa2b/0xa40 __stack_chk_fail+0x19/0x20 sata_pmp_eh_recover+0xa2b/0xa40 ? ahci_do_softreset+0x260/0x260 [libahci] ? ahci_do_hardreset+0x140/0x140 [libahci] ? ata_phys_link_offline+0x60/0x60 ? ahci_stop_engine+0xc0/0xc0 [libahci] sata_pmp_error_handler+0x22/0x30 ahci_error_handler+0x45/0x80 [libahci] ata_scsi_port_error_handler+0x29b/0x770 ? ata_scsi_cmd_error_handler+0x101/0x140 ata_scsi_error+0x95/0xd0 ? scsi_try_target_reset+0x90/0x90 scsi_error_handler+0xd0/0x5b0 kthread+0x121/0x140 ? scsi_eh_get_sense+0x200/0x200 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x22/0x40 Kernel Offset: 0xcc00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) Since sata_pmp_eh_recover_pmp() doens't set rc when ATA_DFLAG_DETACH is set, sata_pmp_eh_recover() continues to run. During retry it triggers the stack protector. Set correct rc in sata_pmp_eh_recover_pmp() to let sata_pmp_eh_recover() jump to pmp_fail directly. BugLink: https://bugs.launchpad.net/bugs/1821434 Cc: stable@vger.kernel.org Signed-off-by: Kai-Heng Feng Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

libata: Remove extra scsi_host_put() in ata_scsi_add_hosts()

2020-04-24T05:58:48Z

[ Upstream commit 1d72f7aec3595249dbb83291ccac041a2d676c57 ] If the call to scsi_add_host_with_dma() in ata_scsi_add_hosts() fails, then we may get use-after-free KASAN warns: ================================================================== BUG: KASAN: use-after-free in kobject_put+0x24/0x180 Read of size 1 at addr ffff0026b8c80364 by task swapper/0/1 CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 5.6.0-rc3-00004-g5a71b206ea82-dirty #1765 Hardware name: Huawei TaiShan 200 (Model 2280)/BC82AMDD, BIOS 2280-V2 CS V3.B160.01 02/24/2020 Call trace: dump_backtrace+0x0/0x298 show_stack+0x14/0x20 dump_stack+0x118/0x190 print_address_description.isra.9+0x6c/0x3b8 __kasan_report+0x134/0x23c kasan_report+0xc/0x18 __asan_load1+0x5c/0x68 kobject_put+0x24/0x180 put_device+0x10/0x20 scsi_host_put+0x10/0x18 ata_devres_release+0x74/0xb0 release_nodes+0x2d0/0x470 devres_release_all+0x50/0x78 really_probe+0x2d4/0x560 driver_probe_device+0x7c/0x148 device_driver_attach+0x94/0xa0 __driver_attach+0xa8/0x110 bus_for_each_dev+0xe8/0x158 driver_attach+0x30/0x40 bus_add_driver+0x220/0x2e0 driver_register+0xbc/0x1d0 __pci_register_driver+0xbc/0xd0 ahci_pci_driver_init+0x20/0x28 do_one_initcall+0xf0/0x608 kernel_init_freeable+0x31c/0x384 kernel_init+0x10/0x118 ret_from_fork+0x10/0x18 Allocated by task 5: save_stack+0x28/0xc8 __kasan_kmalloc.isra.8+0xbc/0xd8 kasan_kmalloc+0xc/0x18 __kmalloc+0x1a8/0x280 scsi_host_alloc+0x44/0x678 ata_scsi_add_hosts+0x74/0x268 ata_host_register+0x228/0x488 ahci_host_activate+0x1c4/0x2a8 ahci_init_one+0xd18/0x1298 local_pci_probe+0x74/0xf0 work_for_cpu_fn+0x2c/0x48 process_one_work+0x488/0xc08 worker_thread+0x330/0x5d0 kthread+0x1c8/0x1d0 ret_from_fork+0x10/0x18 Freed by task 5: save_stack+0x28/0xc8 __kasan_slab_free+0x118/0x180 kasan_slab_free+0x10/0x18 slab_free_freelist_hook+0xa4/0x1a0 kfree+0xd4/0x3a0 scsi_host_dev_release+0x100/0x148 device_release+0x7c/0xe0 kobject_put+0xb0/0x180 put_device+0x10/0x20 scsi_host_put+0x10/0x18 ata_scsi_add_hosts+0x210/0x268 ata_host_register+0x228/0x488 ahci_host_activate+0x1c4/0x2a8 ahci_init_one+0xd18/0x1298 local_pci_probe+0x74/0xf0 work_for_cpu_fn+0x2c/0x48 process_one_work+0x488/0xc08 worker_thread+0x330/0x5d0 kthread+0x1c8/0x1d0 ret_from_fork+0x10/0x18 There is also refcount issue, as well: WARNING: CPU: 1 PID: 1 at lib/refcount.c:28 refcount_warn_saturate+0xf8/0x170 The issue is that we make an erroneous extra call to scsi_host_put() for that host: So in ahci_init_one()->ata_host_alloc_pinfo()->ata_host_alloc(), we setup a device release method - ata_devres_release() - which intends to release the SCSI hosts: static void ata_devres_release(struct device *gendev, void *res) { ... for (i = 0; i < host->n_ports; i++) { struct ata_port *ap = host->ports[i]; if (!ap) continue; if (ap->scsi_host) scsi_host_put(ap->scsi_host); } ... } However in the ata_scsi_add_hosts() error path, we also call scsi_host_put() for the SCSI hosts. Fix by removing the the scsi_host_put() calls in ata_scsi_add_hosts() and leave this to ata_devres_release(). Fixes: f31871951b38 ("libata: separate out ata_host_alloc() and ata_host_register()") Signed-off-by: John Garry Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

ata: ahci: Add shutdown to freeze hardware resources of ahci

2020-02-28T14:42:56Z

commit 10a663a1b15134a5a714aa515e11425a44d4fdf7 upstream. device_shutdown() called from reboot or power_shutdown expect all devices to be shutdown. Same is true for even ahci pci driver. As no ahci shutdown function is implemented, the ata subsystem always remains alive with DMA & interrupt support. File system related calls should not be honored after device_shutdown(). So defining ahci pci driver shutdown to freeze hardware (mask interrupt, stop DMA engine and free DMA resources). Signed-off-by: Prabhakar Kushwaha Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

ahci: Do not export local variable ahci_em_messages

2020-01-29T09:24:30Z

[ Upstream commit 60fc35f327e0a9e60b955c0f3c3ed623608d1baa ] The commit ed08d40cdec4 ("ahci: Changing two module params with static and __read_mostly") moved ahci_em_messages to be static while missing the fact of exporting it. WARNING: "ahci_em_messages" [vmlinux] is a static EXPORT_SYMBOL_GPL Drop export for the local variable ahci_em_messages. Fixes: ed08d40cdec4 ("ahci: Changing two module params with static and __read_mostly") Cc: Chuansheng Liu Signed-off-by: Andy Shevchenko Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin