user/sven/linux.git/drivers/ata, branch v5.18.6

ata: libata-core: fix NULL pointer deref in ata_host_alloc_pinfo()

2022-06-22T12:27:50Z

[ Upstream commit bf476fe22aa1851bab4728e0c49025a6a0bea307 ] In an unlikely (and probably wrong?) case that the 'ppi' parameter of ata_host_alloc_pinfo() points to an array starting with a NULL pointer, there's going to be a kernel oops as the 'pi' local variable won't get reassigned from the initial value of NULL. Initialize 'pi' instead to '&ata_dummy_port_info' to fix the possible kernel oops for good... Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Signed-off-by: Sergey Shtylyov Signed-off-by: Damien Le Moal Signed-off-by: Sasha Levin

ata: libata-transport: fix {dma|pio|xfer}_mode sysfs files

2022-06-14T16:45:18Z

commit 72aad489f992871e908ff6d9055b26c6366fb864 upstream. The {dma|pio}_mode sysfs files are incorrectly documented as having a list of the supported DMA/PIO transfer modes, while the corresponding fields of the *struct* ata_device hold the transfer mode IDs, not masks. To match these docs, the {dma|pio}_mode (and even xfer_mode!) sysfs files are handled by the ata_bitfield_name_match() macro which leads to reading such kind of nonsense from them: $ cat /sys/class/ata_device/dev3.0/pio_mode XFER_UDMA_7, XFER_UDMA_6, XFER_UDMA_5, XFER_UDMA_4, XFER_MW_DMA_4, XFER_PIO_6, XFER_PIO_5, XFER_PIO_4, XFER_PIO_3, XFER_PIO_2, XFER_PIO_1, XFER_PIO_0 Using the correct ata_bitfield_name_search() macro fixes that: $ cat /sys/class/ata_device/dev3.0/pio_mode XFER_PIO_4 While fixing the file documentation, somewhat reword the {dma|pio}_mode file doc and add a note about being mostly useful for PATA devices to the xfer_mode file doc... Fixes: d9027470b886 ("[libata] Add ATA transport class") Signed-off-by: Sergey Shtylyov Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Signed-off-by: Greg Kroah-Hartman

libata: fix translation of concurrent positioning ranges

2022-06-14T16:45:18Z

commit 6d11acd452fd885ef6ace184c9c70bc863a8c72f upstream. Fixing the page length in the SCSI translation for the concurrent positioning ranges VPD page. It was writing starting in offset 3 rather than offset 2 where the MSB is supposed to start for the VPD page length. Cc: stable@vger.kernel.org Fixes: fe22e1c2f705 ("libata: support concurrent positioning ranges log") Signed-off-by: Tyler Erickson Reviewed-by: Muhammad Ahmad Tested-by: Michael English Reviewed-by: Hannes Reinecke Signed-off-by: Damien Le Moal Signed-off-by: Greg Kroah-Hartman

libata: fix reading concurrent positioning ranges log

2022-06-14T16:45:17Z

commit c745dfc541e78428ba3986f1d17fe1dfdaca8184 upstream. The concurrent positioning ranges log is not a fixed size and may depend on how many ranges are supported by the device. This patch uses the size reported in the GPL directory to determine the number of pages supported by the device before attempting to read this log page. This resolves this error from the dmesg output: ata6.00: Read log 0x47 page 0x00 failed, Emask 0x1 Cc: stable@vger.kernel.org Fixes: fe22e1c2f705 ("libata: support concurrent positioning ranges log") Signed-off-by: Tyler Erickson Reviewed-by: Muhammad Ahmad Tested-by: Michael English Signed-off-by: Damien Le Moal Signed-off-by: Greg Kroah-Hartman

ata: pata_octeon_cf: Fix refcount leak in octeon_cf_probe

2022-06-14T16:45:04Z

[ Upstream commit 10d6bdf532902be1d8aa5900b3c03c5671612aa2 ] of_find_device_by_node() takes reference, we should use put_device() to release it when not need anymore. Add missing put_device() to avoid refcount leak. Fixes: 43f01da0f279 ("MIPS/OCTEON/ata: Convert pata_octeon_cf.c to use device tree.") Signed-off-by: Miaoqian Lin Reviewed-by: Sergey Shtylyov Signed-off-by: Damien Le Moal Signed-off-by: Sasha Levin

ata: pata_marvell: Check the 'bmdma_addr' beforing reading

2022-04-21T23:45:06Z

Before detecting the cable type on the dma bar, the driver should check whether the 'bmdma_addr' is zero, which means the adapter does not support DMA, otherwise we will get the following error: [ 5.146634] Bad IO access at port 0x1 (return inb(port)) [ 5.147206] WARNING: CPU: 2 PID: 303 at lib/iomap.c:44 ioread8+0x4a/0x60 [ 5.150856] RIP: 0010:ioread8+0x4a/0x60 [ 5.160238] Call Trace: [ 5.160470] [ 5.160674] marvell_cable_detect+0x6e/0xc0 [pata_marvell] [ 5.161728] ata_eh_recover+0x3520/0x6cc0 [ 5.168075] ata_do_eh+0x49/0x3c0 Signed-off-by: Zheyu Ma Signed-off-by: Damien Le Moal

ata: ahci: Rename CONFIG_SATA_LPM_POLICY configuration item back

2022-04-06T02:08:04Z

CONFIG_SATA_LPM_MOBILE_POLICY was renamed to CONFIG_SATA_LPM_POLICY in commit 4dd4d3deb502 ("ata: ahci: Rename CONFIG_SATA_LPM_MOBILE_POLICY configuration item"). This can potentially cause problems as users would invisibly lose configuration policy defaults when they built the new kernel. To avoid such problems, switch back to the old name (even if it's wrong). Suggested-by: Christoph Hellwig Suggested-by: Damien Le Moal Signed-off-by: Mario Limonciello Signed-off-by: Damien Le Moal

ata: libata-core: Disable READ LOG DMA EXT for Samsung 840 EVOs

2022-04-04T00:56:37Z

Samsung' 840 EVO with the latest firmware (EXT0DB6Q) locks up with the a message: "READ LOG DMA EXT failed, trying PIO" during boot. Initially this was discovered because it caused a crash with the sata_dwc_460ex controller on a WD MyBook Live DUO. The reporter "Tice Rex" which has the unique opportunity that he has two Samsung 840 EVO SSD! One with the older firmware "EXT0BB0Q" which booted fine and didn't expose "READ LOG DMA EXT". But the newer/latest firmware "EXT0DB6Q" caused the headaches. BugLink: https://github.com/openwrt/openwrt/issues/9505 Signed-off-by: Christian Lamparter Signed-off-by: Damien Le Moal

ata: sata_dwc_460ex: Fix crash due to OOB write

2022-04-04T00:56:34Z

the driver uses libata's "tag" values from in various arrays. Since the mentioned patch bumped the ATA_TAG_INTERNAL to 32, the value of the SATA_DWC_QCMD_MAX needs to account for that. Otherwise ATA_TAG_INTERNAL usage cause similar crashes like this as reported by Tice Rex on the OpenWrt Forum and reproduced (with symbols) here: | BUG: Kernel NULL pointer dereference at 0x00000000 | Faulting instruction address: 0xc03ed4b8 | Oops: Kernel access of bad area, sig: 11 [#1] | BE PAGE_SIZE=4K PowerPC 44x Platform | CPU: 0 PID: 362 Comm: scsi_eh_1 Not tainted 5.4.163 #0 | NIP: c03ed4b8 LR: c03d27e8 CTR: c03ed36c | REGS: cfa59950 TRAP: 0300 Not tainted (5.4.163) | MSR: 00021000 CR: 42000222 XER: 00000000 | DEAR: 00000000 ESR: 00000000 | GPR00: c03d27e8 cfa59a08 cfa55fe0 00000000 0fa46bc0 [...] | [..] | NIP [c03ed4b8] sata_dwc_qc_issue+0x14c/0x254 | LR [c03d27e8] ata_qc_issue+0x1c8/0x2dc | Call Trace: | [cfa59a08] [c003f4e0] __cancel_work_timer+0x124/0x194 (unreliable) | [cfa59a78] [c03d27e8] ata_qc_issue+0x1c8/0x2dc | [cfa59a98] [c03d2b3c] ata_exec_internal_sg+0x240/0x524 | [cfa59b08] [c03d2e98] ata_exec_internal+0x78/0xe0 | [cfa59b58] [c03d30fc] ata_read_log_page.part.38+0x1dc/0x204 | [cfa59bc8] [c03d324c] ata_identify_page_supported+0x68/0x130 | [...] This is because sata_dwc_dma_xfer_complete() NULLs the dma_pending's next neighbour "chan" (a *dma_chan struct) in this '32' case right here (line ~735): > hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_NONE; Then the next time, a dma gets issued; dma_dwc_xfer_setup() passes the NULL'd hsdevp->chan to the dmaengine_slave_config() which then causes the crash. With this patch, SATA_DWC_QCMD_MAX is now set to ATA_MAX_QUEUE + 1. This avoids the OOB. But please note, there was a worthwhile discussion on what ATA_TAG_INTERNAL and ATA_MAX_QUEUE is. And why there should not be a "fake" 33 command-long queue size. Ideally, the dw driver should account for the ATA_TAG_INTERNAL. In Damien Le Moal's words: "... having looked at the driver, it is a bigger change than just faking a 33rd "tag" that is in fact not a command tag at all." Fixes: 28361c403683c ("libata: add extra internal command") Cc: stable@kernel.org # 4.18+ BugLink: https://github.com/openwrt/openwrt/issues/9505 Signed-off-by: Christian Lamparter Signed-off-by: Damien Le Moal

ata: libata-sff: Fix compilation warning in ata_sff_lost_interrupt()

2022-04-04T00:49:42Z

When returning false, ata_sff_altstatus() does not return any status value, resulting in a compilation warning in ata_sff_lost_interrupt() ("uninitialized symbol 'status'"). Fix this by initializing the local variable "status" to 0. Fixes: 03c0e84f9c1e ("ata: libata-sff: refactor ata_sff_altstatus()") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal