user/sven/linux.git/drivers/ata, branch v6.1.45

ata: pata_ns87415: mark ns87560_tf_read static

2023-08-03T08:24:07Z

[ Upstream commit 3fc2febb0f8ffae354820c1772ec008733237cfa ] The global function triggers a warning because of the missing prototype drivers/ata/pata_ns87415.c:263:6: warning: no previous prototype for 'ns87560_tf_read' [-Wmissing-prototypes] 263 | void ns87560_tf_read(struct ata_port *ap, struct ata_taskfile *tf) There are no other references to this, so just make it static. Fixes: c4b5b7b6c4423 ("pata_ns87415: Initial cut at 87415/87560 IDE support") Reviewed-by: Sergey Shtylyov Reviewed-by: Serge Semin Signed-off-by: Arnd Bergmann Signed-off-by: Damien Le Moal Signed-off-by: Sasha Levin

ata: libata-scsi: Avoid deadlock on rescan after device resume

2023-06-28T09:12:17Z

[ Upstream commit 6aa0365a3c8512587fffd42fe438768709ddef8e ] When an ATA port is resumed from sleep, the port is reset and a power management request issued to libata EH to reset the port and rescanning the device(s) attached to the port. Device rescanning is done by scheduling an ata_scsi_dev_rescan() work, which will execute scsi_rescan_device(). However, scsi_rescan_device() takes the generic device lock, which is also taken by dpm_resume() when the SCSI device is resumed as well. If a device rescan execution starts before the completion of the SCSI device resume, the rcu locking used to refresh the cached VPD pages of the device, combined with the generic device locking from scsi_rescan_device() and from dpm_resume() can cause a deadlock. Avoid this situation by changing struct ata_port scsi_rescan_task to be a delayed work instead of a simple work_struct. ata_scsi_dev_rescan() is modified to check if the SCSI device associated with the ATA device that must be rescanned is not suspended. If the SCSI device is still suspended, ata_scsi_dev_rescan() returns early and reschedule itself for execution after an arbitrary delay of 5ms. Reported-by: Kai-Heng Feng Reported-by: Joe Breuer Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217530 Fixes: a19a93e4c6a9 ("scsi: core: pm: Rely on the device driver core for async power management") Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Tested-by: Kai-Heng Feng Tested-by: Joe Breuer Signed-off-by: Sasha Levin

ata: libata-scsi: Use correct device no in ata_find_dev()

2023-06-09T08:34:21Z

commit 7f875850f20a42f488840c9df7af91ef7db2d576 upstream. For devices not attached to a port multiplier and managed directly by libata, the device number passed to ata_find_dev() must always be lower than the maximum number of devices returned by ata_link_max_devices(). That is 1 for SATA devices or 2 for an IDE link with master+slave devices. This device number is the SCSI device ID which matches these constraints as the IDs are generated per port and so never exceed the maximum number of devices for the link being used. However, for libsas managed devices, SCSI device IDs are assigned per struct scsi_host, leading to device IDs for SATA devices that can be well in excess of libata per-link maximum number of devices. This results in ata_find_dev() to always return NULL for libsas managed devices except for the first device of the target scsi_host with ID (device number) equal to 0. This issue is visible by executing the hdparm utility, which fails. E.g.: hdparm -i /dev/sdX /dev/sdX: HDIO_GET_IDENTITY failed: No message of desired type Fix this by rewriting ata_find_dev() to ignore the device number for non-PMP attached devices with a link with at most 1 device, that is SATA devices. For these, the device number 0 is always used to return the correct pointer to the struct ata_device of the port link. This change excludes IDE master/slave setups (maximum number of devices per link is 2) and port-multiplier attached devices. Also, to be consistant with the fact that SCSI device IDs and channel numbers used as device numbers are both unsigned int, change the devno argument of ata_find_dev() to unsigned int. Reported-by: Xingui Yang Fixes: 41bda9c98035 ("libata-link: update hotplug to handle PMP links") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Reviewed-by: Jason Yan Signed-off-by: Greg Kroah-Hartman

ata: ahci: Revert "ata: ahci: Add Tiger Lake UP{3,4} AHCI controller"

2023-03-10T08:32:32Z

commit 6210038aeaf49c395c2da57572246d93ec67f6d4 upstream. Commit 104ff59af73a ("ata: ahci: Add Tiger Lake UP{3,4} AHCI controller") enabled low power mode for the Tiger Lake AHIC adapter in the author system but created regressions for others. Revert this patch for now until a better solution is found to make this adapter eco-friendly. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217114 CC: stable@vger.kernel.org Signed-off-by: Damien Le Moal Signed-off-by: Greg Kroah-Hartman

ata: libata-core: Disable READ LOG DMA EXT for Samsung MZ7LH

2023-02-22T11:59:49Z

commit ead089577e0f55b238f980d9f62eaa90b7b64672 upstream. Samsung MZ7LH drives are spewing messages like this in to dmesg with AMD SATA controllers: ata1.00: exception Emask 0x0 SAct 0x7e0000 SErr 0x0 action 0x6 frozen ata1.00: failed command: SEND FPDMA QUEUED ata1.00: cmd 64/01:88:00:00:00/00:00:00:00:00/a0 tag 17 ncq dma 512 out res 40/00:01:01:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) Since this was seen previously with SSD 840 EVO drives in https://bugzilla.kernel.org/show_bug.cgi?id=203475 let's add the same fix for these drives as the EVOs have, since they likely have very similar firmwares. Signed-off-by: Patrick McLean Signed-off-by: Damien Le Moal Signed-off-by: Greg Kroah-Hartman

ata: ahci: Add Tiger Lake UP{3,4} AHCI controller

2023-02-22T11:59:48Z

commit 104ff59af73aba524e57ae0fef70121643ff270e upstream. Mark the Tiger Lake UP{3,4} AHCI controller as "low_power". This enables S0ix to work out of the box. Otherwise this isn't working unless the user manually sets /sys/class/scsi_host/*/link_power_management_policy. Intel lists a total of 4 SATA controller IDs in [1] for those mobile PCHs. This commit just adds the "AHCI" variant since I only tested those. [1]: https://cdrdv2.intel.com/v1/dl/getContent/631119 Signed-off-by: Simon Gaiser CC: stable@vger.kernel.org Signed-off-by: Damien Le Moal Signed-off-by: Greg Kroah-Hartman

ata: libata: Fix sata_down_spd_limit() when no link speed is reported

2023-02-09T10:28:10Z

[ Upstream commit 69f2c9346313ba3d3dfa4091ff99df26c67c9021 ] Commit 2dc0b46b5ea3 ("libata: sata_down_spd_limit should return if driver has not recorded sstatus speed") changed the behavior of sata_down_spd_limit() to return doing nothing if a drive does not report a current link speed, to avoid reducing the link speed to the lowest 1.5 Gbps speed. However, the change assumed that a speed was recorded before probing (e.g. before a suspend/resume) and set in link->sata_spd. This causes problems with adapters/drives combination failing to establish a link speed during probe autonegotiation. One example reported of this problem is an mvebu adapter with a 3Gbps port-multiplier box: autonegotiation fails, leaving no recorded link speed and no reported current link speed. Probe retries also fail as no action is taken by sata_set_spd() after each retry. Fix this by returning early in sata_down_spd_limit() only if we do have a recorded link speed, that is, if link->sata_spd is not 0. With this fix, a failed probe not leading to a recorded link speed is retried at the lower 1.5 Gbps speed, with the link speed potentially increased later on the second revalidate of the device if the device reports that it supports higher link speeds. Reported-by: Marius Dinu Fixes: 2dc0b46b5ea3 ("libata: sata_down_spd_limit should return if driver has not recorded sstatus speed") Reviewed-by: Niklas Cassel Tested-by: Marius Dinu Signed-off-by: Damien Le Moal Signed-off-by: Sasha Levin

ata: pata_cs5535: Don't build on UML

2023-02-01T07:34:34Z

[ Upstream commit 22eebaa631c40f3dac169ba781e0de471b83bf45 ] This driver uses MSR functions that aren't implemented under UML. Avoid building it to prevent tripping up allyesconfig. e.g. /usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x3a3): undefined reference to `__tracepoint_read_msr' /usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x3d2): undefined reference to `__tracepoint_write_msr' /usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x457): undefined reference to `__tracepoint_write_msr' /usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x481): undefined reference to `do_trace_write_msr' /usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x4d5): undefined reference to `do_trace_write_msr' /usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x4f5): undefined reference to `do_trace_read_msr' /usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x51c): undefined reference to `do_trace_write_msr' Signed-off-by: Peter Foley Reviewed-by: Randy Dunlap Signed-off-by: Damien Le Moal Signed-off-by: Sasha Levin

ata: ahci: fix enum constants for gcc-13

2023-01-07T10:11:46Z

commit f07788079f515ca4a681c5f595bdad19cfbd7b1d upstream. gcc-13 slightly changes the type of constant expressions that are defined in an enum, which triggers a compile time sanity check in libata: linux/drivers/ata/libahci.c: In function 'ahci_led_store': linux/include/linux/compiler_types.h:357:45: error: call to '__compiletime_assert_302' declared with attribute error: BUILD_BUG_ON failed: sizeof(_s) > sizeof(long) 357 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) The new behavior is that sizeof() returns the same value for the constant as it does for the enum type, which is generally more sensible and consistent. The problem in libata is that it contains a single enum definition for lots of unrelated constants, some of which are large positive (unsigned) integers like 0xffffffff, while others like (1<<31) are interpreted as negative integers, and this forces the enum type to become 64 bit wide even though most constants would still fit into a signed 32-bit 'int'. Fix this by changing the entire enum definition to use BIT(x) in place of (1< Cc: linux-ide@vger.kernel.org Cc: Damien Le Moal Cc: stable@vger.kernel.org Cc: Randy Dunlap Signed-off-by: Arnd Bergmann Tested-by: Luis Machado Signed-off-by: Damien Le Moal Signed-off-by: Greg Kroah-Hartman

ata: ahci: Fix PCS quirk application for suspend

2023-01-04T10:28:52Z

[ Upstream commit 37e14e4f3715428b809e4df9a9958baa64c77d51 ] Since kernel 5.3.4 my laptop (ICH8M controller) does not see Kingston SV300S37A60G SSD disk connected into a SATA connector on wake from suspend. The problem was introduced in c312ef176399 ("libata/ahci: Drop PCS quirk for Denverton and beyond"): the quirk is not applied on wake from suspend as it originally was. It is worth to mention the commit contained another bug: the quirk is not applied at all to controllers which require it. The fix commit 09d6ac8dc51a ("libata/ahci: Fix PCS quirk application") landed in 5.3.8. So testing my patch anywhere between commits c312ef176399 and 09d6ac8dc51a is pointless. Not all disks trigger the problem. For example nothing bad happens with Western Digital WD5000LPCX HDD. Test hardware: - Acer 5920G with ICH8M SATA controller - sda: some SATA HDD connnected into the DVD drive IDE port with a SATA-IDE caddy. It is a boot disk - sdb: Kingston SV300S37A60G SSD connected into the only SATA port Sample "dmesg --notime | grep -E '^(sd |ata)'" output on wake: sd 0:0:0:0: [sda] Starting disk sd 2:0:0:0: [sdb] Starting disk ata4: SATA link down (SStatus 4 SControl 300) ata3: SATA link down (SStatus 4 SControl 300) ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out ata1: FORCE: cable set to 80c ata5: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 4 SControl 300) ata3: SATA link down (SStatus 4 SControl 300) ata3.00: disabled sd 2:0:0:0: rejecting I/O to offline device ata3.00: detaching (SCSI 2:0:0:0) sd 2:0:0:0: [sdb] Start/Stop Unit failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK sd 2:0:0:0: [sdb] Synchronizing SCSI cache sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 2:0:0:0: [sdb] Stopping disk sd 2:0:0:0: [sdb] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK Commit c312ef176399 dropped ahci_pci_reset_controller() which internally calls ahci_reset_controller() and applies the PCS quirk if needed after that. It was called each time a reset was required instead of just ahci_reset_controller(). This patch puts the function back in place. Fixes: c312ef176399 ("libata/ahci: Drop PCS quirk for Denverton and beyond") Signed-off-by: Adam Vodopjan Signed-off-by: Damien Le Moal Signed-off-by: Sasha Levin