user/sven/linux.git/drivers/ata, branch v6.4.3

ata: libata-scsi: Avoid deadlock on rescan after device resume

2023-06-18T03:00:49Z

When an ATA port is resumed from sleep, the port is reset and a power management request issued to libata EH to reset the port and rescanning the device(s) attached to the port. Device rescanning is done by scheduling an ata_scsi_dev_rescan() work, which will execute scsi_rescan_device(). However, scsi_rescan_device() takes the generic device lock, which is also taken by dpm_resume() when the SCSI device is resumed as well. If a device rescan execution starts before the completion of the SCSI device resume, the rcu locking used to refresh the cached VPD pages of the device, combined with the generic device locking from scsi_rescan_device() and from dpm_resume() can cause a deadlock. Avoid this situation by changing struct ata_port scsi_rescan_task to be a delayed work instead of a simple work_struct. ata_scsi_dev_rescan() is modified to check if the SCSI device associated with the ATA device that must be rescanned is not suspended. If the SCSI device is still suspended, ata_scsi_dev_rescan() returns early and reschedule itself for execution after an arbitrary delay of 5ms. Reported-by: Kai-Heng Feng Reported-by: Joe Breuer Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217530 Fixes: a19a93e4c6a9 ("scsi: core: pm: Rely on the device driver core for async power management") Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Tested-by: Kai-Heng Feng Tested-by: Joe Breuer

ata: libata-scsi: Use correct device no in ata_find_dev()

2023-05-29T23:08:18Z

For devices not attached to a port multiplier and managed directly by libata, the device number passed to ata_find_dev() must always be lower than the maximum number of devices returned by ata_link_max_devices(). That is 1 for SATA devices or 2 for an IDE link with master+slave devices. This device number is the SCSI device ID which matches these constraints as the IDs are generated per port and so never exceed the maximum number of devices for the link being used. However, for libsas managed devices, SCSI device IDs are assigned per struct scsi_host, leading to device IDs for SATA devices that can be well in excess of libata per-link maximum number of devices. This results in ata_find_dev() to always return NULL for libsas managed devices except for the first device of the target scsi_host with ID (device number) equal to 0. This issue is visible by executing the hdparm utility, which fails. E.g.: hdparm -i /dev/sdX /dev/sdX: HDIO_GET_IDENTITY failed: No message of desired type Fix this by rewriting ata_find_dev() to ignore the device number for non-PMP attached devices with a link with at most 1 device, that is SATA devices. For these, the device number 0 is always used to return the correct pointer to the struct ata_device of the port link. This change excludes IDE master/slave setups (maximum number of devices per link is 2) and port-multiplier attached devices. Also, to be consistant with the fact that SCSI device IDs and channel numbers used as device numbers are both unsigned int, change the devno argument of ata_find_dev() to unsigned int. Reported-by: Xingui Yang Fixes: 41bda9c98035 ("libata-link: update hotplug to handle PMP links") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Reviewed-by: Jason Yan

Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2023-04-27T18:53:57Z

Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits) device property: make device_property functions take const device * driver core: update comments in device_rename() driver core: Don't require dynamic_debug for initcall_debug probe timing firmware_loader: rework crypto dependencies firmware_loader: Strip off \n from customized path zram: fix up permission for the hot_add sysfs file cacheinfo: Add use_arch[|_cache]_info field/function arch_topology: Remove early cacheinfo error message if -ENOENT cacheinfo: Check cache properties are present in DT cacheinfo: Check sib_leaf in cache_leaves_are_shared() cacheinfo: Allow early level detection when DT/ACPI info is missing/broken cacheinfo: Add arm64 early level initializer implementation cacheinfo: Add arch specific early level initializer tty: make tty_class a static const structure driver core: class: remove struct class_interface * from callbacks driver core: class: mark the struct class in struct class_interface constant driver core: class: make class_register() take a const * driver core: class: mark class_release() as taking a const * driver core: remove incorrect comment for device_create* MIPS: vpe-cmp: remove module owner pointer from struct class usage. ...

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2023-04-26T22:39:25Z

Pull SCSI updates from James Bottomley: "Updates to the usual drivers (megaraid_sas, scsi_debug, lpfc, target, mpi3mr, hisi_sas, arcmsr). The major core change is the constification of the host templates (which touches everything) along with other minor fixups and clean ups" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (207 commits) scsi: ufs: mcq: Use pointer arithmetic in ufshcd_send_command() scsi: ufs: mcq: Annotate ufshcd_inc_sq_tail() appropriately scsi: cxlflash: s/semahpore/semaphore/ scsi: lpfc: Silence an incorrect device output scsi: mpi3mr: Use IRQ save variants of spinlock to protect chain frame allocation scsi: scsi_debug: Fix missing error code in scsi_debug_init() scsi: hisi_sas: Work around build failure in suspend function scsi: lpfc: Fix ioremap issues in lpfc_sli4_pci_mem_setup() scsi: mpt3sas: Fix an issue when driver is being removed scsi: mpt3sas: Remove HBA BIOS version in the kernel log scsi: target: core: Fix invalid memory access scsi: scsi_debug: Drop sdebug_queue scsi: scsi_debug: Only allow sdebug_max_queue be modified when no shosts scsi: scsi_debug: Use scsi_host_busy() in delay_store() and ndelay_store() scsi: scsi_debug: Use blk_mq_tagset_busy_iter() in stop_all_queued() scsi: scsi_debug: Use blk_mq_tagset_busy_iter() in sdebug_blk_mq_poll() scsi: scsi_debug: Dynamically allocate sdebug_queued_cmd scsi: scsi_debug: Use scsi_block_requests() to block queues scsi: scsi_debug: Protect block_unblock_all_queues() with mutex scsi: scsi_debug: Change shost list lock to a mutex ...

Merge tag 'ata-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata

2023-04-26T20:09:45Z

Pull ata updates from Damien Le Moal: - Many cleanups of the pata_parport driver and of its protocol modules (Ondrej) - Remove unused code (ata_id_xxx() functions) (Sergey) - Add Add UniPhier SATA controller DT bindings (Kunihiko) - Fix dependencies for the Freescale QorIQ AHCI SATA controller driver (Geert) - DT property handling improvements (Rob) * tag 'ata-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (57 commits) ata: pata_parport-bpck6: Declare mode_map as static ata: pata_parport-bpck6: Remove dependency on 64BIT ata: pata_parport-bpck6: reduce indents in bpck6_open ata: pata_parport-bpck6: delete ppc6lnx.c ata: pata_parport-bpck6: move defines and mode_map to bpck6.c ata: pata_parport-bpck6: move ppc6_wr_data_byte to bpck6.c and rename ata: pata_parport-bpck6: move ppc6_rd_data_byte to bpck6.c and rename ata: pata_parport-bpck6: move ppc6_send_cmd to bpck6.c and rename ata: pata_parport-bpck6: move ppc6_deselect to bpck6.c and rename ata: pata_parport-bpck6: merge ppc6_select into bpck6_open ata: pata_parport-bpck6: move ppc6_open to bpck6.c and rename ata: pata_parport-bpck6: move ppc6_wr_extout to bpck6.c and rename ata: pata_parport-bpck6: move ppc6_wait_for_fifo to bpck6.c and rename ata: pata_parport-bpck6: merge ppc6_wr_data_blk into bpck6_write_block ata: pata_parport-bpck6: merge ppc6_rd_data_blk into bpck6_read_block ata: pata_parport-bpck6: merge ppc6_wr_port16_blk into bpck6_write_block ata: pata_parport-bpck6: merge ppc6_rd_port16_blk into bpck6_read_block ata: pata_parport-bpck6: merge ppc6_wr_port into bpck6_write_regr ata: pata_parport-bpck6: merge ppc6_rd_port into bpck6_read_regr ata: pata_parport-bpck6: remove ppc6_close ...

Merge tag 'acpi-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2023-04-26T01:37:41Z

Pull ACPI updates from Rafael Wysocki: "These update the ACPICA code in the kernel to upstream revision 20230331, fix the ACPI SBS driver and the evaluation of the _PDC method on Xen dom0 in the ACPI processor driver, update the ACPI driver for Intel SoCs and clean up code in multiple places. Specifics: - Update the ACPICA code in the kernel to upstream revision 20230331 including the following changes: * Delete bogus node_array array of pointers from AEST table (Jessica Clarke) * Add support for trace buffer extension in GICC to the ACPI MADT parser (Xiongfeng Wang) * Add missing macro ACPI_FUNCTION_TRACE() for acpi_ns_repair_HID() (Xiongfeng Wang) * Add missing tables to astable (Pedro Falcato) * Add support for 64 bit loong_arch compilation to ACPICA (Huacai Chen) * Add support for ASPT table in disassembler to ACPICA (Jeremi Piotrowski) * Add support for Arm's MPAM ACPI table version 2 (Hesham Almatary) * Update all copyrights/signons in ACPICA to 2023 (Bob Moore) * Add support for ClockInput resource (v6.5) (Niyas Sait) * Add RISC-V INTC interrupt controller definition to the list of supported interrupt controllers for MADT (Sunil V L) * Add structure definitions for the RISC-V RHCT ACPI table (Sunil V L) * Address several cases in which the ACPICA code might lead to undefined behavior (Tamir Duberstein) * Make ACPICA code support flexible arrays properly (Kees Cook) * Check null return of ACPI_ALLOCATE_ZEROED in acpi_db_display_objects() (void0red) * Add os specific support for Zephyr RTOS to ACPICA (Najumon) * Update version to 20230331 (Bob Moore) - Fix evaluating the _PDC ACPI control method when running as Xen dom0 (Roger Pau Monne) - Use platform devices to load ACPI PPC and PCC drivers (Petr Pavlu) - Check for null return of devm_kzalloc() in fch_misc_setup() (Kang Chen) - Log a message if enable_irq_wake() fails for the ACPI SCI (Simon Gaiser) - Initialize the correct IOMMU fwspec while parsing ACPI VIOT (Jean-Philippe Brucker) - Amend indentation and prefix error messages with FW_BUG in the ACPI SPCR parsing code (Andy Shevchenko) - Enable ACPI sysfs support for CCEL records (Kuppuswamy Sathyanarayanan) - Make the APEI error injection code warn on invalid arguments when explicitly indicated by platform (Shuai Xue) - Add CXL error types to the error injection code in APEI (Tony Luck) - Refactor acpi_data_prop_read_single() (Andy Shevchenko) - Fix two issues in the ACPI SBS driver (Armin Wolf) - Replace ternary operator with min_t() in the generic ACPI thermal zone driver (Jiangshan Yi) - Ensure that ACPI notify handlers are not running after removal and clean up code in acpi_sb_notify() (Rafael Wysocki) - Remove register_backlight_delay module option and code and remove quirks for false-positive backlight control support advertised on desktop boards (Hans de Goede) - Replace irqdomain.h include with struct declarations in ACPI headers and update several pieces of code previously including of.h implicitly through those headers (Rob Herring) - Fix acpi_evaluate_dsm_typed() redefinition error (Kiran K) - Update the pm_profile sysfs attribute documentation (Rafael Wysocki) - Add 80862289 ACPI _HID for second PWM controller on Cherry Trail to the ACPI driver for Intel SoCs (Hans de Goede)" * tag 'acpi-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits) ACPI: LPSS: Add 80862289 ACPI _HID for second PWM controller on Cherry Trail ACPI: bus: Ensure that notify handlers are not running after removal ACPI: bus: Add missing braces to acpi_sb_notify() ACPI: video: Remove desktops without backlight DMI quirks ACPI: video: Remove register_backlight_delay module option and code ACPI: Replace irqdomain.h include with struct declarations fpga: lattice-sysconfig-spi: Add explicit include for of.h tpm: atmel: Add explicit include for of.h virtio-mmio: Add explicit include for of.h pata: ixp4xx: Add explicit include for of.h ata: pata_macio: Add explicit include of irqdomain.h serial: 8250_tegra: Add explicit include for of.h net: rfkill-gpio: Add explicit include for of.h staging: iio: resolver: ad2s1210: Add explicit include for of.h iio: adc: ad7292: Add explicit include for of.h ACPICA: Update version to 20230331 ACPICA: add os specific support for Zephyr RTOS ACPICA: ACPICA: check null return of ACPI_ALLOCATE_ZEROED in acpi_db_display_objects ACPICA: acpi_resource_irq: Replace 1-element arrays with flexible array ACPICA: acpi_madt_oem_data: Fix flexible array member definition ...

pata: ixp4xx: Add explicit include for of.h

2023-04-06T18:36:27Z

With linux/acpi.h no longer implicitly including of.h, add an explicit include of of.h to fix the following error: drivers/ata/pata_ixp4xx_cf.c:258:15: error: implicit declaration of function 'of_property_read_u32_index'; did you mean 'fwnode_property_read_u32_array'? [-Werror=implicit-function-declaration] Reported-by: Stephen Rothwell Signed-off-by: Rob Herring Signed-off-by: Rafael J. Wysocki

ata: pata_macio: Add explicit include of irqdomain.h

2023-04-06T18:36:27Z

With linux/acpi.h no longer including irqdomain.h, add an explicit include of irqdomain.h to fix the following error: drivers/ata/pata_macio.c:1172:23: error: implicit declaration of function 'irq_create_mapping' [-Werror=implicit-function-declaration] Reported-by: Stephen Rothwell Signed-off-by: Rob Herring Signed-off-by: Rafael J. Wysocki

Merge 6.3-rc5 into driver-core-next

2023-04-03T07:33:30Z

We need the fixes in here for testing, as well as the driver core changes for documentation updates to build on. Signed-off-by: Greg Kroah-Hartman

ata: pata_parport-bpck6: Declare mode_map as static

2023-03-28T00:28:06Z

Compilation C=1 of the bpck6 protocol module generates the following message: drivers/ata/pata_parport/bpck6.c:62:5: warning: symbol 'mode_map' was not declared. Should it be static? Fix this by declaring mode_map as static. Signed-off-by: Damien Le Moal Reviewed-by: Ondrej Zary