user/sven/linux.git/drivers/ata, branch v6.5.9

ata: libata-eh: Fix compilation warning in ata_eh_link_report()

2023-10-25T10:16:17Z

[ Upstream commit 49728bdc702391902a473b9393f1620eea32acb0 ] The 6 bytes length of the tries_buf string in ata_eh_link_report() is too short and results in a gcc compilation warning with W-!: drivers/ata/libata-eh.c: In function ‘ata_eh_link_report’: drivers/ata/libata-eh.c:2371:59: warning: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size 4 [-Wformat-truncation=] 2371 | snprintf(tries_buf, sizeof(tries_buf), " t%d", | ^~ drivers/ata/libata-eh.c:2371:56: note: directive argument in the range [-2147483648, 4] 2371 | snprintf(tries_buf, sizeof(tries_buf), " t%d", | ^~~~~~ drivers/ata/libata-eh.c:2371:17: note: ‘snprintf’ output between 4 and 14 bytes into a destination of size 6 2371 | snprintf(tries_buf, sizeof(tries_buf), " t%d", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2372 | ap->eh_tries); | ~~~~~~~~~~~~~ Avoid this warning by increasing the string size to 16B. Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Tested-by: Geert Uytterhoeven Reviewed-by: Martin K. Petersen Signed-off-by: Sasha Levin

ata: libata-core: Fix compilation warning in ata_dev_config_ncq()

2023-10-25T10:16:17Z

[ Upstream commit ed518d9ba980dc0d27c7d1dea1e627ba001d1977 ] The 24 bytes length allocated to the ncq_desc string in ata_dev_config_lba() for ata_dev_config_ncq() to use is too short, causing the following gcc compilation warnings when compiling with W=1: drivers/ata/libata-core.c: In function ‘ata_dev_configure’: drivers/ata/libata-core.c:2378:56: warning: ‘%d’ directive output may be truncated writing between 1 and 2 bytes into a region of size between 1 and 11 [-Wformat-truncation=] 2378 | snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth, | ^~ In function ‘ata_dev_config_ncq’, inlined from ‘ata_dev_config_lba’ at drivers/ata/libata-core.c:2649:8, inlined from ‘ata_dev_configure’ at drivers/ata/libata-core.c:2952:9: drivers/ata/libata-core.c:2378:41: note: directive argument in the range [1, 32] 2378 | snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth, | ^~~~~~~~~~~~~~~~~~~~~ drivers/ata/libata-core.c:2378:17: note: ‘snprintf’ output between 16 and 31 bytes into a destination of size 24 2378 | snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 2379 | ddepth, aa_desc); | ~~~~~~~~~~~~~~~~ Avoid these warnings and the potential truncation by changing the size of the ncq_desc string to 32 characters. Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Tested-by: Geert Uytterhoeven Reviewed-by: Martin K. Petersen Signed-off-by: Sasha Levin

ata: libata-scsi: Disable scsi device manage_system_start_stop

2023-10-19T21:10:56Z

commit aa3998dbeb3abce63653b7f6d4542e7dcd022590 upstream. The introduction of a device link to create a consumer/supplier relationship between the scsi device of an ATA device and the ATA port of that ATA device fixes the ordering of system suspend and resume operations. For suspend, the scsi device is suspended first and the ata port after it. This is fine as this allows the synchronize cache and START STOP UNIT commands issued by the scsi disk driver to be executed before the ata port is disabled. For resume operations, the ata port is resumed first, followed by the scsi device. This allows having the request queue of the scsi device to be unfrozen after the ata port resume is scheduled in EH, thus avoiding to see new requests prematurely issued to the ATA device. Since libata sets manage_system_start_stop to 1, the scsi disk resume operation also results in issuing a START STOP UNIT command to the device being resumed so that the device exits standby power mode. However, restoring the ATA device to the active power mode must be synchronized with libata EH processing of the port resume operation to avoid either 1) seeing the start stop unit command being received too early when the port is not yet resumed and ready to accept commands, or after the port resume process issues commands such as IDENTIFY to revalidate the device. In this last case, the risk is that the device revalidation fails with timeout errors as the drive is still spun down. Commit 0a8589055936 ("ata,scsi: do not issue START STOP UNIT on resume") disabled issuing the START STOP UNIT command to avoid issues with it. But this is incorrect as transitioning a device to the active power mode from the standby power mode set on suspend requires a media access command. The IDENTIFY, READ LOG and SET FEATURES commands executed in libata EH context triggered by the ata port resume operation may thus fail. Fix these synchronization issues is by handling a device power mode transitions for system suspend and resume directly in libata EH context, without relying on the scsi disk driver management triggered with the manage_system_start_stop flag. To do this, the following libata helper functions are introduced: 1) ata_dev_power_set_standby(): This function issues a STANDBY IMMEDIATE command to transitiom a device to the standby power mode. For HDDs, this spins down the disks. This function applies only to ATA and ZAC devices and does nothing otherwise. This function also does nothing for devices that have the ATA_FLAG_NO_POWEROFF_SPINDOWN or ATA_FLAG_NO_HIBERNATE_SPINDOWN flag set. For suspend, call ata_dev_power_set_standby() in ata_eh_handle_port_suspend() before the port is disabled and frozen. ata_eh_unload() is also modified to transition all enabled devices to the standby power mode when the system is shutdown or devices removed. 2) ata_dev_power_set_active() and This function applies to ATA or ZAC devices and issues a VERIFY command for 1 sector at LBA 0 to transition the device to the active power mode. For HDDs, since this function will complete only once the disk spin up. Its execution uses the same timeouts as for reset, to give the drive enough time to complete spinup without triggering a command timeout. For resume, call ata_dev_power_set_active() in ata_eh_revalidate_and_attach() after the port has been enabled and before any other command is issued to the device. With these changes, the manage_system_start_stop and no_start_on_resume scsi device flags do not need to be set in ata_scsi_dev_config(). The flag manage_runtime_start_stop is still set to allow the sd driver to spinup/spindown a disk through the sd runtime operations. Fixes: 0a8589055936 ("ata,scsi: do not issue START STOP UNIT on resume") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Tested-by: Geert Uytterhoeven Reviewed-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

ata: pata_parport: implement set_devctl

2023-10-19T21:10:56Z

commit d2302427c12277929c9f390adeda19fbf403c0bb upstream. Add missing ops->sff_set_devctl implementation. Fixes: 246a1c4c6b7f ("ata: pata_parport: add driver (PARIDE replacement)") Cc: stable@vger.kernel.org Signed-off-by: Ondrej Zary Reviewed-by: Sergey Shtylyov Signed-off-by: Damien Le Moal Signed-off-by: Greg Kroah-Hartman

ata: pata_parport: fix pata_parport_devchk

2023-10-19T21:10:56Z

commit b555aa66760f17df4a0a5e4b440816e390311a38 upstream. There's a 'x' missing in 0x55 in pata_parport_devchk(), causing the detection to always fail. Fix it. Fixes: 246a1c4c6b7f ("ata: pata_parport: add driver (PARIDE replacement)") Cc: stable@vger.kernel.org Signed-off-by: Ondrej Zary Reviewed-by: Sergey Shtylyov Signed-off-by: Damien Le Moal Signed-off-by: Greg Kroah-Hartman

ata: libata-scsi: Fix delayed scsi_rescan_device() execution

2023-10-10T20:02:54Z

[ Upstream commit 8b4d9469d0b0e553208ee6f62f2807111fde18b9 ] Commit 6aa0365a3c85 ("ata: libata-scsi: Avoid deadlock on rescan after device resume") modified ata_scsi_dev_rescan() to check the scsi device "is_suspended" power field to ensure that the scsi device associated with an ATA device is fully resumed when scsi_rescan_device() is executed. However, this fix is problematic as: 1) It relies on a PM internal field that should not be used without PM device locking protection. 2) The check for is_suspended and the call to scsi_rescan_device() are not atomic and a suspend PM event may be triggered between them, casuing scsi_rescan_device() to be called on a suspended device and in that function blocking while holding the scsi device lock. This would deadlock a following resume operation. These problems can trigger PM deadlocks on resume, especially with resume operations triggered quickly after or during suspend operations. E.g., a simple bash script like: for (( i=0; i<10; i++ )); do echo "+2 > /sys/class/rtc/rtc0/wakealarm echo mem > /sys/power/state done that triggers a resume 2 seconds after starting suspending a system can quickly lead to a PM deadlock preventing the system from correctly resuming. Fix this by replacing the check on is_suspended with a check on the return value given by scsi_rescan_device() as that function will fail if called against a suspended device. Also make sure rescan tasks already scheduled are first cancelled before suspending an ata port. Fixes: 6aa0365a3c85 ("ata: libata-scsi: Avoid deadlock on rescan after device resume") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Reviewed-by: Niklas Cassel Tested-by: Geert Uytterhoeven Reviewed-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: core: Improve type safety of scsi_rescan_device()

2023-10-10T20:02:54Z

[ Upstream commit 79519528a180c64a90863db2ce70887de6c49d16 ] Most callers of scsi_rescan_device() have the scsi_device pointer readily available. Pass a struct scsi_device pointer to scsi_rescan_device() instead of a struct device pointer. This change prevents that a pointer to another struct device would be passed accidentally to scsi_rescan_device(). Remove the scsi_rescan_device() declaration from the scsi_priv.h header file since it duplicates the declaration in . Reviewed-by: Hannes Reinecke Reviewed-by: Damien Le Moal Reviewed-by: John Garry Cc: Mike Christie Cc: Ming Lei Signed-off-by: Bart Van Assche Link: https://lore.kernel.org/r/20230822153043.4046244-1-bvanassche@acm.org Signed-off-by: Martin K. Petersen Stable-dep-of: 8b4d9469d0b0 ("ata: libata-scsi: Fix delayed scsi_rescan_device() execution") Signed-off-by: Sasha Levin

ata: libata-core: Do not register PM operations for SAS ports

2023-10-06T11:16:28Z

commit 75e2bd5f1ede42a2bc88aa34b431e1ace8e0bea0 upstream. libsas does its own domain based power management of ports. For such ports, libata should not use a device type defining power management operations as executing these operations for suspend/resume in addition to libsas calls to ata_sas_port_suspend() and ata_sas_port_resume() is not necessary (and likely dangerous to do, even though problems are not seen currently). Introduce the new ata_port_sas_type device_type for ports managed by libsas. This new device type is used in ata_tport_add() and is defined without power management operations. Fixes: 2fcbdcb4c802 ("[SCSI] libata: export ata_port suspend/resume infrastructure for sas") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Tested-by: Chia-Lin Kao (AceLan) Tested-by: Geert Uytterhoeven Reviewed-by: John Garry Reviewed-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

ata: libata-core: Fix port and device removal

2023-10-06T11:16:28Z

commit 84d76529c650f887f1e18caee72d6f0589e1baf9 upstream. Whenever an ATA adapter driver is removed (e.g. rmmod), ata_port_detach() is called repeatedly for all the adapter ports to remove (unload) the devices attached to the port and delete the port device itself. Removing of devices is done using libata EH with the ATA_PFLAG_UNLOADING port flag set. This causes libata EH to execute ata_eh_unload() which disables all devices attached to the port. ata_port_detach() finishes by calling scsi_remove_host() to remove the scsi host associated with the port. This function will trigger the removal of all scsi devices attached to the host and in the case of disks, calls to sd_shutdown() which will flush the device write cache and stop the device. However, given that the devices were already disabled by ata_eh_unload(), the synchronize write cache command and start stop unit commands fail. E.g. running "rmmod ahci" with first removing sd_mod results in error messages like: ata13.00: disable device sd 0:0:0:0: [sda] Synchronizing SCSI cache sd 0:0:0:0: [sda] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 0:0:0:0: [sda] Stopping disk sd 0:0:0:0: [sda] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK Fix this by removing all scsi devices of the ata devices connected to the port before scheduling libata EH to disable the ATA devices. Fixes: 720ba12620ee ("[PATCH] libata-hp: update unload-unplug") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Reviewed-by: Niklas Cassel Tested-by: Chia-Lin Kao (AceLan) Tested-by: Geert Uytterhoeven Reviewed-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

ata: libata-core: Fix ata_port_request_pm() locking

2023-10-06T11:16:28Z

commit 3b8e0af4a7a331d1510e963b8fd77e2fca0a77f1 upstream. The function ata_port_request_pm() checks the port flag ATA_PFLAG_PM_PENDING and calls ata_port_wait_eh() if this flag is set to ensure that power management operations for a port are not scheduled simultaneously. However, this flag check is done without holding the port lock. Fix this by taking the port lock on entry to the function and checking the flag under this lock. The lock is released and re-taken if ata_port_wait_eh() needs to be called. The two WARN_ON() macros checking that the ATA_PFLAG_PM_PENDING flag was cleared are removed as the first call is racy and the second one done without holding the port lock. Fixes: 5ef41082912b ("ata: add ata port system PM callbacks") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Tested-by: Chia-Lin Kao (AceLan) Reviewed-by: Niklas Cassel Tested-by: Geert Uytterhoeven Reviewed-by: Martin K. Petersen Reviewed-by: Bart Van Assche Signed-off-by: Greg Kroah-Hartman