user/sven/linux.git/drivers/ata, branch v6.6.72

ata: sata_highbank: fix OF node reference leak in highbank_initialize_phys()

2024-12-19T17:11:22Z

commit 676fe1f6f74db988191dab5df3bf256908177072 upstream. The OF node reference obtained by of_parse_phandle_with_args() is not released on early return. Add a of_node_put() call before returning. Fixes: 8996b89d6bc9 ("ata: add platform driver for Calxeda AHCI controller") Signed-off-by: Joe Hattori Signed-off-by: Damien Le Moal Signed-off-by: Greg Kroah-Hartman

ata: libata: Set DID_TIME_OUT for commands that actually timed out

2024-11-01T00:58:33Z

commit 8e59a2a5459fd9840dbe2cbde85fe154b11e1727 upstream. When ata_qc_complete() schedules a command for EH using ata_qc_schedule_eh(), blk_abort_request() will be called, which leads to req->q->mq_ops->timeout() / scsi_timeout() being called. scsi_timeout(), if the LLDD has no abort handler (libata has no abort handler), will set host byte to DID_TIME_OUT, and then call scsi_eh_scmd_add() to add the command to EH. Thus, when commands first enter libata's EH strategy_handler, all the commands that have been added to EH will have DID_TIME_OUT set. Commit e5dd410acb34 ("ata: libata: Clear DID_TIME_OUT for ATA PT commands with sense data") clears this bogus DID_TIME_OUT flag for all commands that reached libata's EH strategy_handler. libata has its own flag (AC_ERR_TIMEOUT), that it sets for commands that have not received a completion at the time of entering EH. ata_eh_worth_retry() has no special handling for AC_ERR_TIMEOUT, so by default timed out commands will get flag ATA_QCFLAG_RETRY set, and will be retried after the port has been reset (ata_eh_link_autopsy() always triggers a port reset if any command has AC_ERR_TIMEOUT set). For a command that has ATA_QCFLAG_RETRY set, while also having an error flag set (e.g. AC_ERR_TIMEOUT), ata_eh_finish() will not increment scmd->allowed, so the command will at most be retried scmd->allowed number of times (which by default is set to 3). However, scsi_eh_flush_done_q() will only retry commands for which scsi_noretry_cmd() returns false. For a command that has DID_TIME_OUT set, while also having either the FAILFAST flag set, or the command being a passthrough command, scsi_noretry_cmd() will return true. Thus, such a command will never be retried. Thus, make sure that libata sets SCSI's DID_TIME_OUT flag for commands that actually timed out (libata's AC_ERR_TIMEOUT flag), such that timed out commands will once again not be retried if they are also a FAILFAST or passthrough command. Cc: stable@vger.kernel.org Fixes: e5dd410acb34 ("ata: libata: Clear DID_TIME_OUT for ATA PT commands with sense data") Reported-by: Lai, Yi Closes: https://lore.kernel.org/linux-ide/ZxYz871I3Blsi30F@ly-workstation/ Reviewed-by: Damien Le Moal Link: https://lore.kernel.org/r/20241023105540.1070012-2-cassel@kernel.org Signed-off-by: Niklas Cassel Signed-off-by: Greg Kroah-Hartman

ata: libata: avoid superfluous disk spin down + spin up during hibernation

2024-10-17T13:24:35Z

commit a38719e3157118428e34fbd45b0d0707a5877784 upstream. A user reported that commit aa3998dbeb3a ("ata: libata-scsi: Disable scsi device manage_system_start_stop") introduced a spin down + immediate spin up of the disk both when entering and when resuming from hibernation. This behavior was not there before, and causes an increased latency both when entering and when resuming from hibernation. Hibernation is done by three consecutive PM events, in the following order: 1) PM_EVENT_FREEZE 2) PM_EVENT_THAW 3) PM_EVENT_HIBERNATE Commit aa3998dbeb3a ("ata: libata-scsi: Disable scsi device manage_system_start_stop") modified ata_eh_handle_port_suspend() to call ata_dev_power_set_standby() (which spins down the disk), for both event PM_EVENT_FREEZE and event PM_EVENT_HIBERNATE. Documentation/driver-api/pm/devices.rst, section "Entering Hibernation", explicitly mentions that PM_EVENT_FREEZE does not have to be put the device in a low-power state, and actually recommends not doing so. Thus, let's not spin down the disk on PM_EVENT_FREEZE. (The disk will instead be spun down during the subsequent PM_EVENT_HIBERNATE event.) This way, PM_EVENT_FREEZE will behave as it did before commit aa3998dbeb3a ("ata: libata-scsi: Disable scsi device manage_system_start_stop"), while PM_EVENT_HIBERNATE will continue to spin down the disk. This will avoid the superfluous spin down + spin up when entering and resuming from hibernation, while still making sure that the disk is spun down before actually entering hibernation. Cc: stable@vger.kernel.org # v6.6+ Fixes: aa3998dbeb3a ("ata: libata-scsi: Disable scsi device manage_system_start_stop") Reviewed-by: Damien Le Moal Link: https://lore.kernel.org/r/20241008135843.1266244-2-cassel@kernel.org Signed-off-by: Niklas Cassel Signed-off-by: Greg Kroah-Hartman

ata: ahci: Add mask_port_map module parameter

2024-10-17T13:24:11Z

[ Upstream commit 24cfd86433c920188ac3f02df8aba6bc4c792f4b ] Commits 0077a504e1a4 ("ahci: asm1166: correct count of reported ports") and 9815e3961754 ("ahci: asm1064: correct count of reported ports") attempted to limit the ports of the ASM1166 and ASM1064 AHCI controllers to avoid long boot times caused by the fact that these adapters report a port map larger than the number of physical ports. The excess ports are "virtual" to hide port multiplier devices and probing these ports takes time. However, these commits caused a regression for users that do use PMP devices, as the ATA devices connected to the PMP cannot be scanned. These commits have thus been reverted by commit 6cd8adc3e18 ("ahci: asm1064: asm1166: don't limit reported ports") to allow the discovery of devices connected through a port multiplier. But this revert re-introduced the long boot times for users that do not use a port multiplier setup. This patch adds the mask_port_map ahci module parameter to allow users to manually specify port map masks for controllers. In the case of the ASMedia 1166 and 1064 controllers, users that do not have port multiplier devices can mask the excess virtual ports exposed by the controller to speedup port scanning, thus reducing boot time. The mask_port_map parameter accepts 2 different formats: - mask_port_map= This applies the same mask to all AHCI controllers present in the system. This format is convenient for small systems that have only a single AHCI controller. - mask_port_map==,=mask,... This applies the specified masks only to the PCI device listed. The field is a regular PCI device ID (domain:bus:dev.func). This ID can be seen following "ahci" in the kernel messages. E.g. for "ahci 0000:01:00.0: 2/2 ports implemented (port mask 0x3)", the field is "0000:01:00.0". When used, the function ahci_save_initial_config() indicates that a port map mask was applied with the message "masking port_map ...". E.g.: without a mask: modprobe ahci dmesg | grep ahci ... ahci 0000:00:17.0: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode ahci 0000:00:17.0: (0000:00:17.0) 8/8 ports implemented (port mask 0xff) With a mask: modprobe ahci mask_port_map=0000:00:17.0=0x1 dmesg | grep ahci ... ahci 0000:00:17.0: masking port_map 0xff -> 0x1 ahci 0000:00:17.0: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode ahci 0000:00:17.0: (0000:00:17.0) 1/8 ports implemented (port mask 0x1) Signed-off-by: Damien Le Moal Reviewed-by: Niklas Cassel Signed-off-by: Sasha Levin

ata: sata_sil: Rename sil_blacklist to sil_quirks

2024-10-10T09:57:32Z

[ Upstream commit 93b0f9e11ce511353c65b7f924cf5f95bd9c3aba ] Rename the array sil_blacklist to sil_quirks as this name is more neutral and is also consistent with how this driver define quirks with the SIL_QUIRK_XXX flags. Signed-off-by: Damien Le Moal Reviewed-by: Niklas Cassel Reviewed-by: Igor Pylypiv Signed-off-by: Sasha Levin

ata: pata_serverworks: Do not use the term blacklist

2024-10-10T09:57:32Z

[ Upstream commit 858048568c9e3887d8b19e101ee72f129d65cb15 ] Let's not use the term blacklist in the function serverworks_osb4_filter() documentation comment and rather simply refer to what that function looks at: the list of devices with groken UDMA5. While at it, also constify the values of the csb_bad_ata100 array. Of note is that all of this should probably be handled using libata quirk mechanism but it is unclear if these UDMA5 quirks are specific to this controller only. Signed-off-by: Damien Le Moal Reviewed-by: Niklas Cassel Reviewed-by: Igor Pylypiv Signed-off-by: Sasha Levin

ata: libata-scsi: Fix ata_msense_control() CDL page reporting

2024-10-04T14:29:48Z

commit 0e9a2990a93f27daa643b6fa73cfa47b128947a7 upstream. When the user requests the ALL_SUB_MPAGES mode sense page, ata_msense_control() adds the CDL_T2A_SUB_MPAGE twice instead of adding the CDL_T2A_SUB_MPAGE and CDL_T2B_SUB_MPAGE pages information. Correct the second call to ata_msense_control_spgt2() to report the CDL_T2B_SUB_MPAGE page. Fixes: 673b2fe6ff1d ("scsi: ata: libata-scsi: Add support for CDL pages mode sense") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Reviewed-by: Hannes Reinecke Signed-off-by: Greg Kroah-Hartman

ata: libata: Clear DID_TIME_OUT for ATA PT commands with sense data

2024-10-04T14:29:13Z

[ Upstream commit e5dd410acb34c7341a0a93b429dcf3dabf9e3323 ] When ata_qc_complete() schedules a command for EH using ata_qc_schedule_eh(), blk_abort_request() will be called, which leads to req->q->mq_ops->timeout() / scsi_timeout() being called. scsi_timeout(), if the LLDD has no abort handler (libata has no abort handler), will set host byte to DID_TIME_OUT, and then call scsi_eh_scmd_add() to add the command to EH. Thus, when commands first enter libata's EH strategy_handler, all the commands that have been added to EH will have DID_TIME_OUT set. libata has its own flag (AC_ERR_TIMEOUT), that it sets for commands that have not received a completion at the time of entering EH. Thus, libata doesn't really care about DID_TIME_OUT at all, and currently clears the host byte at the end of EH, in ata_scsi_qc_complete(), before scsi_eh_finish_cmd() is called. However, this clearing in ata_scsi_qc_complete() is currently only done for commands that are not ATA passthrough commands. Since the host byte is visible in the completion that we return to user space for ATA passthrough commands, for ATA passthrough commands that got completed via EH (commands with sense data), the user will incorrectly see: ATA pass-through(16): transport error: Host_status=0x03 [DID_TIME_OUT] Fix this by moving the clearing of the host byte (which is currently only done for commands that are not ATA passthrough commands) from ata_scsi_qc_complete() to the start of EH (regardless if the command is ATA passthrough or not). While at it, use the proper helper function to clear the host byte, rather than open coding the clearing. This will make sure that we: -Correctly clear DID_TIME_OUT for both ATA passthrough commands and commands that are not ATA passthrough commands. -Do not needlessly clear the host byte for commands that did not go via EH. ata_scsi_qc_complete() is called both for commands that are completed normally (without going via EH), and for commands that went via EH, however, only commands that went via EH will have DID_TIME_OUT set. Fixes: 24aeebbf8ea9 ("scsi: ata: libata: Change ata_eh_request_sense() to not set CHECK_CONDITION") Reported-by: Igor Pylypiv Closes: https://lore.kernel.org/linux-ide/ZttIN8He8TOZ7Lct@google.com/ Signed-off-by: Niklas Cassel Tested-by: Igor Pylypiv Reviewed-by: Hannes Reinecke Signed-off-by: Damien Le Moal Signed-off-by: Sasha Levin

ata: libata-scsi: Check ATA_QCFLAG_RTF_FILLED before using result_tf

2024-09-12T09:11:43Z

[ Upstream commit 816be86c7993d3c5832c3017c0056297e86f978c ] qc->result_tf contents are only valid when the ATA_QCFLAG_RTF_FILLED flag is set. The ATA_QCFLAG_RTF_FILLED flag should be always set for commands that failed or for commands that have the ATA_QCFLAG_RESULT_TF flag set. Reviewed-by: Hannes Reinecke Reviewed-by: Damien Le Moal Reviewed-by: Niklas Cassel Signed-off-by: Igor Pylypiv Link: https://lore.kernel.org/r/20240702024735.1152293-8-ipylypiv@google.com Signed-off-by: Niklas Cassel Signed-off-by: Sasha Levin

ata: libata-scsi: Remove redundant sense_buffer memsets

2024-09-12T09:11:43Z

[ Upstream commit 3f6d903b54a137e9e438d9c3b774b5d0432917bc ] SCSI layer clears sense_buffer in scsi_queue_rq() so there is no need for libata to clear it again. Reviewed-by: Hannes Reinecke Reviewed-by: Damien Le Moal Reviewed-by: Niklas Cassel Signed-off-by: Igor Pylypiv Link: https://lore.kernel.org/r/20240702024735.1152293-5-ipylypiv@google.com Signed-off-by: Niklas Cassel Signed-off-by: Sasha Levin