user/sven/linux.git/drivers/base/base.h, branch v5.7

device.h: move devtmpfs prototypes out of the file

2019-12-16T09:10:18Z

The devtmpfs functions do not need to be in device.h as only the driver core uses them, so move them to the private .h file for the driver core. Cc: "Rafael J. Wysocki" Cc: Suzuki K Poulose Cc: Saravana Kannan Cc: Heikki Krogerus Link: https://lore.kernel.org/r/20191209193303.1694546-3-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman

drivers/base: base.h: add proper copyright and header info

2019-12-12T10:33:39Z

base.h didn't have any copyright information in it, so update it with the correct information. Cc: "Rafael J. Wysocki" Link: https://lore.kernel.org/r/20191209193303.1694546-2-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman

driver/core: Convert to use built-in RCU list checking

2019-08-13T21:28:47Z

This commit applies the consolidated hlist_for_each_entry_rcu() support for lockdep conditions. Acked-by: Greg Kroah-Hartman Signed-off-by: Joel Fernandes (Google) Signed-off-by: Paul E. McKenney

driver core: Probe devices asynchronously instead of the driver

2019-01-31T13:20:53Z

Probe devices asynchronously instead of the driver. This results in us seeing the same behavior if the device is registered before the driver or after. This way we can avoid serializing the initialization should the driver not be loaded until after the devices have already been added. The motivation behind this is that if we have a set of devices that take a significant amount of time to load we can greatly reduce the time to load by processing them in parallel instead of one at a time. In addition, each device can exist on a different node so placing a single thread on one CPU to initialize all of the devices for a given driver can result in poor performance on a system with multiple nodes. This approach can reduce the time needed to scan SCSI LUNs significantly. The only way to realize that speedup is by enabling more concurrency which is what is achieved with this patch. To achieve this it was necessary to add a new member "async_driver" to the device_private structure to store the driver pointer while we wait on the deferred probe call. Reviewed-by: Bart Van Assche Reviewed-by: Dan Williams Signed-off-by: Alexander Duyck Reviewed-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

device core: Consolidate locking and unlocking of parent and device

2019-01-31T13:20:53Z

Try to consolidate all of the locking and unlocking of both the parent and device when attaching or removing a driver from a given device. To do that I first consolidated the lock pattern into two functions __device_driver_lock and __device_driver_unlock. After doing that I then created functions specific to attaching and detaching the driver while acquiring these locks. By doing this I was able to reduce the number of spots where we touch need_parent_lock from 12 down to 4. This patch should produce no functional changes, it is meant to be a code clean-up/consolidation only. Reviewed-by: Luis Chamberlain Reviewed-by: Bart Van Assche Reviewed-by: Dan Williams Reviewed-by: Rafael J. Wysocki Signed-off-by: Alexander Duyck Signed-off-by: Greg Kroah-Hartman

driver core: Establish order of operations for device_add and device_del via bitflag

2019-01-31T13:20:53Z

Add an additional bit flag to the device_private struct named "dead". This additional flag provides a guarantee that when a device_del is executed on a given interface an async worker will not attempt to attach the driver following the earlier device_del call. Previously this guarantee was not present and could result in the device_del call attempting to remove a driver from an interface only to have the async worker attempt to probe the driver later when it finally completes the asynchronous probe call. One additional change added was that I pulled the check for dev->driver out of the __device_attach_driver call and instead placed it in the __device_attach_async_helper call. This was motivated by the fact that the only other caller of this, __device_attach, had already taken the device_lock() and checked for dev->driver. Instead of testing for this twice in this path it makes more sense to just consolidate the dev->dead and dev->driver checks together into one set of checks. Reviewed-by: Dan Williams Reviewed-by: Rafael J. Wysocki Signed-off-by: Alexander Duyck Signed-off-by: Greg Kroah-Hartman

driver core: move device->knode_class to device_private

2019-01-18T15:55:48Z

As the description of struct device_private says, it stores data which is private to driver core. And it already has similar fields like: knode_parent, knode_driver, knode_driver and knode_bus. This look it is more proper to put knode_class together with those fields to make it private to driver core. This patch move device->knode_class to device_private to make it comply with code convention. Signed-off-by: Wei Yang Reviewed-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

driver core: remove unnecessary function extern declare

2018-07-16T11:32:20Z

device_private_init is called only in core.c, extern declare is unnecessary and make it static. Cc: Greg Kroah-Hartman Cc: "Rafael J. Wysocki" Signed-off-by: Shaokun Zhang Signed-off-by: Greg Kroah-Hartman

PM / core: fix deferred probe breaking suspend resume order

2018-04-24T10:18:25Z

When bridge and its endpoint is enumerated the devices are added to the dpm list. Afterward, the bridge defers probe when IOMMU is not ready. This causes the bridge to be moved to the end of the dpm list when deferred probe kicks in. The order of the dpm list for bridge and endpoint is reversed. Add reordering code to move the bridge and its children and consumers to the end of the pm list so the order for suspend and resume is not altered. The code also move device and its children and consumers to the tail of device_kset list if it is registered. Signed-off-by: Toan Le Signed-off-by: Feng Kan Reviewed-by: Greg Kroah-Hartman Signed-off-by: Rafael J. Wysocki

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman