user/sven/linux.git/drivers/base/cpu.c, branch v4.18.2

x86/speculation/l1tf: Add sysfs reporting for l1tf

2018-08-15T15:37:25Z

commit 17dbca119312b4e8173d4e25ff64262119fcef38 upstream. L1TF core kernel workarounds are cheap and normally always enabled, However they still should be reported in sysfs if the system is vulnerable or mitigated. Add the necessary CPU feature/bug bits. - Extend the existing checks for Meltdowns to determine if the system is vulnerable. All CPUs which are not vulnerable to Meltdown are also not vulnerable to L1TF - Check for 32bit non PAE and emit a warning as there is no practical way for mitigation due to the limited physical address bits - If the system has more than MAX_PA/2 physical memory the invert page workarounds don't protect the system against the L1TF attack anymore, because an inverted physical address will also point to valid memory. Print a warning in this case and report that the system is vulnerable. Add a function which returns the PFN limit for the L1TF mitigation, which will be used in follow up patches for sanity and range checks. [ tglx: Renamed the CPU feature bit to L1TF_PTEINV ] Signed-off-by: Andi Kleen Signed-off-by: Thomas Gleixner Reviewed-by: Josh Poimboeuf Acked-by: Dave Hansen Signed-off-by: Greg Kroah-Hartman

x86/bugs: Expose /sys/../spec_store_bypass

2018-05-03T11:55:47Z

Add the sysfs file for the new vulerability. It does not do much except show the words 'Vulnerable' for recent x86 cores. Intel cores prior to family 6 are known not to be vulnerable, and so are some Atoms and some Xeon Phi. It assumes that older Cyrix, Centaur, etc. cores are immune. Signed-off-by: Konrad Rzeszutek Wilk Signed-off-by: Thomas Gleixner Reviewed-by: Borislav Petkov Reviewed-by: Ingo Molnar

driver core: cpu: use put_device() if device_register fail

2018-03-15T13:37:04Z

if device_register() returned an error! Always use put_device() to give up the reference initialized. Signed-off-by: Arvind Yadav Signed-off-by: Greg Kroah-Hartman

Merge tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2018-02-01T18:00:28Z

Pull driver core updates from Greg KH: "Here is the set of "big" driver core patches for 4.16-rc1. The majority of the work here is in the firmware subsystem, with reworks to try to attempt to make the code easier to handle in the long run, but no functional change. There's also some tree-wide sysfs attribute fixups with lots of acks from the various subsystem maintainers, as well as a handful of other normal fixes and changes. And finally, some license cleanups for the driver core and sysfs code. All have been in linux-next for a while with no reported issues" * tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (48 commits) device property: Define type of PROPERTY_ENRTY_*() macros device property: Reuse property_entry_free_data() device property: Move property_entry_free_data() upper firmware: Fix up docs referring to FIRMWARE_IN_KERNEL firmware: Drop FIRMWARE_IN_KERNEL Kconfig option USB: serial: keyspan: Drop firmware Kconfig options sysfs: remove DEBUG defines sysfs: use SPDX identifiers drivers: base: add coredump driver ops sysfs: add attribute specification for /sysfs/devices/.../coredump test_firmware: fix missing unlock on error in config_num_requests_store() test_firmware: make local symbol test_fw_config static sysfs: turn WARN() into pr_warn() firmware: Fix a typo in fallback-mechanisms.rst treewide: Use DEVICE_ATTR_WO treewide: Use DEVICE_ATTR_RO treewide: Use DEVICE_ATTR_RW sysfs.h: Use octal permissions component: add debugfs support bus: simple-pm-bus: convert bool SIMPLE_PM_BUS to tristate ...

Merge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2018-01-14T17:51:25Z

Pull x86 pti updates from Thomas Gleixner: "This contains: - a PTI bugfix to avoid setting reserved CR3 bits when PCID is disabled. This seems to cause issues on a virtual machine at least and is incorrect according to the AMD manual. - a PTI bugfix which disables the perf BTS facility if PTI is enabled. The BTS AUX buffer is not globally visible and causes the CPU to fault when the mapping disappears on switching CR3 to user space. A full fix which restores BTS on PTI is non trivial and will be worked on. - PTI bugfixes for EFI and trusted boot which make sure that the user space visible page table entries have the NX bit cleared - removal of dead code in the PTI pagetable setup functions - add PTI documentation - add a selftest for vsyscall to verify that the kernel actually implements what it advertises. - a sysfs interface to expose vulnerability and mitigation information so there is a coherent way for users to retrieve the status. - the initial spectre_v2 mitigations, aka retpoline: + The necessary ASM thunk and compiler support + The ASM variants of retpoline and the conversion of affected ASM code + Make LFENCE serializing on AMD so it can be used as speculation trap + The RSB fill after vmexit - initial objtool support for retpoline As I said in the status mail this is the most of the set of patches which should go into 4.15 except two straight forward patches still on hold: - the retpoline add on of LFENCE which waits for ACKs - the RSB fill after context switch Both should be ready to go early next week and with that we'll have covered the major holes of spectre_v2 and go back to normality" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits) x86,perf: Disable intel_bts when PTI security/Kconfig: Correct the Documentation reference for PTI x86/pti: Fix !PCID and sanitize defines selftests/x86: Add test_vsyscall x86/retpoline: Fill return stack buffer on vmexit x86/retpoline/irq32: Convert assembler indirect jumps x86/retpoline/checksum32: Convert assembler indirect jumps x86/retpoline/xen: Convert Xen hypercall indirect jumps x86/retpoline/hyperv: Convert assembler indirect jumps x86/retpoline/ftrace: Convert ftrace assembler indirect jumps x86/retpoline/entry: Convert entry assembler indirect jumps x86/retpoline/crypto: Convert crypto assembler indirect jumps x86/spectre: Add boot time option to select Spectre v2 mitigation x86/retpoline: Add initial retpoline support objtool: Allow alternatives to be ignored objtool: Detect jumps to retpoline thunks x86/pti: Make unpoison of pgd for trusted boot work for real x86/alternatives: Fix optimize_nops() checking sysfs/cpu: Fix typos in vulnerability documentation x86/cpu/AMD: Use LFENCE_RDTSC in preference to MFENCE_RDTSC ...

sysfs/cpu: Add vulnerability folder

2018-01-08T10:10:33Z

As the meltdown/spectre problem affects several CPU architectures, it makes sense to have common way to express whether a system is affected by a particular vulnerability or not. If affected the way to express the mitigation should be common as well. Create /sys/devices/system/cpu/vulnerabilities folder and files for meltdown, spectre_v1 and spectre_v2. Allow architectures to override the show function. Signed-off-by: Thomas Gleixner Reviewed-by: Greg Kroah-Hartman Reviewed-by: Konrad Rzeszutek Wilk Cc: Peter Zijlstra Cc: Will Deacon Cc: Dave Hansen Cc: Linus Torvalds Cc: Borislav Petkov Cc: David Woodhouse Link: https://lkml.kernel.org/r/20180107214913.096657732@linutronix.de

driver core: add SPDX identifiers to all driver core files

2017-12-07T17:36:43Z

It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the driver core files files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Johannes Berg Cc: "Luis R. Rodriguez" Cc: William Breathitt Gray Cc: Thomas Gleixner Cc: Kate Stewart Cc: Philippe Ombredanne Signed-off-by: Greg Kroah-Hartman

Merge tag 'pm-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2017-11-14T03:43:50Z

Pull power management updates from Rafael Wysocki: "There are no real big ticket items here this time. The most noticeable change is probably the relocation of the OPP (Operating Performance Points) framework to its own directory under drivers/ as it has grown big enough for that. Also Viresh is now going to maintain it and send pull requests for it to me, so you will see this change in the git history going forward (but still not right now). Another noticeable set of changes is the modifications of the PM core, the PCI subsystem and the ACPI PM domain to allow of more integration between system-wide suspend/resume and runtime PM. For now it's just a way to avoid resuming devices from runtime suspend unnecessarily during system suspend (if the driver sets a flag to indicate its readiness for that) and in the works is an analogous mechanism to allow devices to stay suspended after system resume. In addition to that, we have some changes related to supporting frequency-invariant CPU utilization metrics in the scheduler and in the schedutil cpufreq governor on ARM and changes to add support for device performance states to the generic power domains (genpd) framework. The rest is mostly fixes and cleanups of various sorts. Specifics: - Relocate the OPP (Operating Performance Points) framework to its own directory under drivers/ and add support for power domain performance states to it (Viresh Kumar). - Modify the PM core, the PCI bus type and the ACPI PM domain to support power management driver flags allowing device drivers to specify their capabilities and preferences regarding the handling of devices with enabled runtime PM during system suspend/resume and clean up that code somewhat (Rafael Wysocki, Ulf Hansson). - Add frequency-invariant accounting support to the task scheduler on ARM and ARM64 (Dietmar Eggemann). - Fix PM QoS device resume latency framework to prevent "no restriction" requests from overriding requests with specific requirements and drop the confusing PM_QOS_FLAG_REMOTE_WAKEUP device PM QoS flag (Rafael Wysocki). - Drop legacy class suspend/resume operations from the PM core and drop legacy bus type suspend and resume callbacks from ARM/locomo (Rafael Wysocki). - Add min/max frequency support to devfreq and clean it up somewhat (Chanwoo Choi). - Rework wakeup support in the generic power domains (genpd) framework and update some of its users accordingly (Geert Uytterhoeven). - Convert timers in the PM core to use timer_setup() (Kees Cook). - Add support for exposing the SLP_S0 (Low Power S0 Idle) residency counter based on the LPIT ACPI table on Intel platforms (Srinivas Pandruvada). - Add per-CPU PM QoS resume latency support to the ladder cpuidle governor (Ramesh Thomas). - Fix a deadlock between the wakeup notify handler and the notifier removal in the ACPI core (Ville Syrjälä). - Fix a cpufreq schedutil governor issue causing it to use stale cached frequency values sometimes (Viresh Kumar). - Fix an issue in the system suspend core support code causing wakeup events detection to fail in some cases (Rajat Jain). - Fix the generic power domains (genpd) framework to prevent the PM core from using the direct-complete optimization with it as that is guaranteed to fail (Ulf Hansson). - Fix a minor issue in the cpuidle core and clean it up a bit (Gaurav Jindal, Nicholas Piggin). - Fix and clean up the intel_idle and ARM cpuidle drivers (Jason Baron, Len Brown, Leo Yan). - Fix a couple of minor issues in the OPP framework and clean it up (Arvind Yadav, Fabio Estevam, Sudeep Holla, Tobias Jordan). - Fix and clean up some cpufreq drivers and fix a minor issue in the cpufreq statistics code (Arvind Yadav, Bhumika Goyal, Fabio Estevam, Gautham Shenoy, Gustavo Silva, Marek Szyprowski, Masahiro Yamada, Robert Jarzmik, Zumeng Chen). - Fix minor issues in the system suspend and hibernation core, in power management documentation and in the AVS (Adaptive Voltage Scaling) framework (Helge Deller, Himanshu Jha, Joe Perches, Rafael Wysocki). - Fix some issues in the cpupower utility and document that Shuah Khan is going to maintain it going forward (Prarit Bhargava, Shuah Khan)" * tag 'pm-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (88 commits) tools/power/cpupower: add libcpupower.so.0.0.1 to .gitignore tools/power/cpupower: Add 64 bit library detection intel_idle: Graceful probe failure when MWAIT is disabled cpufreq: schedutil: Reset cached_raw_freq when not in sync with next_freq freezer: Fix typo in freezable_schedule_timeout() comment PM / s2idle: Clear the events_check_enabled flag cpufreq: stats: Handle the case when trans_table goes beyond PAGE_SIZE cpufreq: arm_big_little: make cpufreq_arm_bL_ops structures const cpufreq: arm_big_little: make function arguments and structure pointer const cpuidle: Avoid assignment in if () argument cpuidle: Clean up cpuidle_enable_device() error handling a bit ACPI / PM: Fix acpi_pm_notifier_lock vs flush_workqueue() deadlock PM / Domains: Fix genpd to deal with drivers returning 1 from ->prepare() cpuidle: ladder: Add per CPU PM QoS resume latency support PM / QoS: Fix device resume latency framework PM / domains: Rework governor code to be more consistent PM / Domains: Remove gpd_dev_ops.active_wakeup() callback soc: rockchip: power-domain: Use GENPD_FLAG_ACTIVE_WAKEUP soc: mediatek: Use GENPD_FLAG_ACTIVE_WAKEUP ARM: shmobile: pm-rmobile: Use GENPD_FLAG_ACTIVE_WAKEUP ...

PM / QoS: Fix device resume latency framework

2017-11-08T11:14:51Z

The special value of 0 for device resume latency PM QoS means "no restriction", but there are two problems with that. First, device resume latency PM QoS requests with 0 as the value are always put in front of requests with positive values in the priority lists used internally by the PM QoS framework, causing 0 to be chosen as an effective constraint value. However, that 0 is then interpreted as "no restriction" effectively overriding the other requests with specific restrictions which is incorrect. Second, the users of device resume latency PM QoS have no way to specify that *any* resume latency at all should be avoided, which is an artificial limitation in general. To address these issues, modify device resume latency PM QoS to use S32_MAX as the "no constraint" value and 0 as the "no latency at all" one and rework its users (the cpuidle menu governor, the genpd QoS governor and the runtime PM framework) to follow these changes. Also add a special "n/a" value to the corresponding user space I/F to allow user space to indicate that it cannot accept any resume latencies at all for the given device. Fixes: 85dc0b8a4019 (PM / QoS: Make it possible to expose PM QoS latency constraints) Link: https://bugzilla.kernel.org/show_bug.cgi?id=197323 Reported-by: Reinette Chatre Signed-off-by: Rafael J. Wysocki Tested-by: Reinette Chatre Tested-by: Geert Uytterhoeven Tested-by: Tero Kristo Reviewed-by: Ramesh Thomas

Revert "PM / QoS: Fix device resume latency PM QoS"

2017-10-31T17:35:40Z

This reverts commit 0cc2b4e5a020 (PM / QoS: Fix device resume latency PM QoS) as it introduced regressions on multiple systems and the fix-up in commit 2a9a86d5c813 (PM / QoS: Fix default runtime_pm device resume latency) does not address all of them. The original problem that commit 0cc2b4e5a020 was attempting to fix will be addressed later. Fixes: 0cc2b4e5a020 (PM / QoS: Fix device resume latency PM QoS) Reported-by: Geert Uytterhoeven Signed-off-by: Rafael J. Wysocki