user/sven/linux.git/drivers/base/driver.c, branch v3.8.4

driver core: don't trigger uevent after failure

2012-07-17T17:40:23Z

Do not send the uevent if driver_add_groups failed. Reported-by: Ming Lei Signed-off-by: Sebastian Ott Signed-off-by: Greg Kroah-Hartman

driver core: move uevent call to driver_register

2012-07-17T01:04:25Z

Device driver attribute groups are created after userspace is notified via an add event. Fix this by moving the kobject_uevent call to driver_register after the attribute groups are added. Signed-off-by: Sebastian Ott Signed-off-by: Greg Kroah-Hartman

Driver Core: don't oops with unregistered driver in driver_find_device()

2012-05-14T15:46:01Z

driver_find_device() can be called with an unregistered driver. Need to check driver_private to see if it's populated or not, especially under deferrable probe. In the case that there are 2 drivers, one depends on the other. With -EPROBE_DEFER, two drivers can use deferred probe to ensure that their relative probe order doesn't matter. If dependee driver is probed first, then the dependant's driver_find_device('dependee') succeeds. If the dependant is probed first, then the dependant's driver_find_device('dependee') should return NULL, and the dependant should get -EPROBE_DEFER. driver_find_device() needs to return NULL if it's not populated. In [PATCHv5 2/3] ARM: tegra: Add SMMU enabler in AHB: http://article.gmane.org/gmane.linux.ports.tegra/4658 "tegra_ahb_driver" may not be populated when it's called. For more SMMU/AHB specific discussion, refer to the following thread: https://lkml.org/lkml/2012/5/10/21 Signed-off-by: Hiroshi DOYU Cc: Stephen Warren Signed-off-by: Greg Kroah-Hartman

Revert "driver core: check start node in klist_iter_init_node"

2012-04-20T02:17:30Z

This reverts commit a15d49fd3094cff90e5410ca454a870e0a722fe1 as that patch broke the build. Cc: Hannes Reinecke Reported-by: Stephen Rothwell Signed-off-by: Greg Kroah-Hartman

driver core: check start node in klist_iter_init_node

2012-04-18T22:39:52Z

klist_iter_init_node() takes a node as a start argument. However, this node might not be valid anymore. This patch updates the klist_iter_init_node() and dependent functions to return an error if so. All calling functions have been audited to check for a return code here. Signed-off-by: Hannes Reinecke Cc: Greg Kroah-Hartmann Cc: Kay Sievers Cc: Stable Kernel Cc: Linux Kernel Signed-off-by: Greg Kroah-Hartman

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

2012-03-22T01:55:10Z

Pull powerpc merge from Benjamin Herrenschmidt: "Here's the powerpc batch for this merge window. It is going to be a bit more nasty than usual as in touching things outside of arch/powerpc mostly due to the big iSeriesectomy :-) We finally got rid of the bugger (legacy iSeries support) which was a PITA to maintain and that nobody really used anymore. Here are some of the highlights: - Legacy iSeries is gone. Thanks Stephen ! There's still some bits and pieces remaining if you do a grep -ir series arch/powerpc but they are harmless and will be removed in the next few weeks hopefully. - The 'fadump' functionality (Firmware Assisted Dump) replaces the previous (equivalent) "pHyp assisted dump"... it's a rewrite of a mechanism to get the hypervisor to do crash dumps on pSeries, the new implementation hopefully being much more reliable. Thanks Mahesh Salgaonkar. - The "EEH" code (pSeries PCI error handling & recovery) got a big spring cleaning, motivated by the need to be able to implement a new backend for it on top of some new different type of firwmare. The work isn't complete yet, but a good chunk of the cleanups is there. Note that this adds a field to struct device_node which is not very nice and which Grant objects to. I will have a patch soon that moves that to a powerpc private data structure (hopefully before rc1) and we'll improve things further later on (hopefully getting rid of the need for that pointer completely). Thanks Gavin Shan. - I dug into our exception & interrupt handling code to improve the way we do lazy interrupt handling (and make it work properly with "edge" triggered interrupt sources), and while at it found & fixed a wagon of issues in those areas, including adding support for page fault retry & fatal signals on page faults. - Your usual random batch of small fixes & updates, including a bunch of new embedded boards, both Freescale and APM based ones, etc..." I fixed up some conflicts with the generalized irq-domain changes from Grant Likely, hopefully correctly. * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (141 commits) powerpc/ps3: Do not adjust the wrapper load address powerpc: Remove the rest of the legacy iSeries include files powerpc: Remove the remaining CONFIG_PPC_ISERIES pieces init: Remove CONFIG_PPC_ISERIES powerpc: Remove FW_FEATURE ISERIES from arch code tty/hvc_vio: FW_FEATURE_ISERIES is no longer selectable powerpc/spufs: Fix double unlocks powerpc/5200: convert mpc5200 to use of_platform_populate() powerpc/mpc5200: add options to mpc5200_defconfig powerpc/mpc52xx: add a4m072 board support powerpc/mpc5200: update mpc5200_defconfig to fit for charon board Documentation/powerpc/mpc52xx.txt: Checkpatch cleanup powerpc/44x: Add additional device support for APM821xx SoC and Bluestone board powerpc/44x: Add support PCI-E for APM821xx SoC and Bluestone board MAINTAINERS: Update PowerPC 4xx tree powerpc/44x: The bug fixed support for APM821xx SoC and Bluestone board powerpc: document the FSL MPIC message register binding powerpc: add support for MPIC message register API powerpc/fsl: Added aliased MSIIR register address to MSI node in dts powerpc/85xx: mpc8548cds - add 36-bit dts ...

driver-core: remove legacy iSeries hack

2012-03-08T23:35:21Z

The PowerPC legacy iSeries plateform is being removed along with the "one looney iseries driver", so this code can now be removed as well. cc: Greg Kroah-Hartman Signed-off-by: Stephen Rothwell Signed-off-by: Benjamin Herrenschmidt

Eliminate get_driver() and put_driver()

2012-01-25T00:00:36Z

Now that there are no users of get_driver() or put_driver(), this patch (as1513) removes those routines completely. Signed-off-by: Alan Stern CC: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Driver core: driver_find() drops reference before returning

2012-01-25T00:00:34Z

As part of the removal of get_driver()/put_driver(), this patch (as1510) changes driver_find(); it now drops the reference it acquires before returning. The patch also adjusts all the callers of driver_find() to remove the now unnecessary calls to put_driver(). In addition, the patch adds a warning to driver_find(): Callers must make sure the driver they are searching for does not get unloaded while they are using it. This has always been the case; driver_find() has never prevented a driver from being unregistered or unloaded. Hence the patch will not introduce any new bugs. The existing callers all seem to be okay in this respect, however I don't understand the video drivers well enough to be certain about them. Signed-off-by: Alan Stern CC: Dmitry Torokhov CC: Kyungmin Park CC: Andy Walls CC: Martin Schwidefsky Signed-off-by: Greg Kroah-Hartman

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32Z

percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn