user/sven/linux.git/drivers/base/node.c, branch v6.2.7

Merge tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

2022-10-11T00:53:04Z

Pull MM updates from Andrew Morton: - Yu Zhao's Multi-Gen LRU patches are here. They've been under test in linux-next for a couple of months without, to my knowledge, any negative reports (or any positive ones, come to that). - Also the Maple Tree from Liam Howlett. An overlapping range-based tree for vmas. It it apparently slightly more efficient in its own right, but is mainly targeted at enabling work to reduce mmap_lock contention. Liam has identified a number of other tree users in the kernel which could be beneficially onverted to mapletrees. Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat at [1]. This has yet to be addressed due to Liam's unfortunately timed vacation. He is now back and we'll get this fixed up. - Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses clang-generated instrumentation to detect used-unintialized bugs down to the single bit level. KMSAN keeps finding bugs. New ones, as well as the legacy ones. - Yang Shi adds a userspace mechanism (madvise) to induce a collapse of memory into THPs. - Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to support file/shmem-backed pages. - userfaultfd updates from Axel Rasmussen - zsmalloc cleanups from Alexey Romanov - cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and memory-failure - Huang Ying adds enhancements to NUMA balancing memory tiering mode's page promotion, with a new way of detecting hot pages. - memcg updates from Shakeel Butt: charging optimizations and reduced memory consumption. - memcg cleanups from Kairui Song. - memcg fixes and cleanups from Johannes Weiner. - Vishal Moola provides more folio conversions - Zhang Yi removed ll_rw_block() :( - migration enhancements from Peter Xu - migration error-path bugfixes from Huang Ying - Aneesh Kumar added ability for a device driver to alter the memory tiering promotion paths. For optimizations by PMEM drivers, DRM drivers, etc. - vma merging improvements from Jakub Matěn. - NUMA hinting cleanups from David Hildenbrand. - xu xin added aditional userspace visibility into KSM merging activity. - THP & KSM code consolidation from Qi Zheng. - more folio work from Matthew Wilcox. - KASAN updates from Andrey Konovalov. - DAMON cleanups from Kaixu Xia. - DAMON work from SeongJae Park: fixes, cleanups. - hugetlb sysfs cleanups from Muchun Song. - Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core. Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1] * tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits) hugetlb: allocate vma lock for all sharable vmas hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer hugetlb: fix vma lock handling during split vma and range unmapping mglru: mm/vmscan.c: fix imprecise comments mm/mglru: don't sync disk for each aging cycle mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol mm: memcontrol: use do_memsw_account() in a few more places mm: memcontrol: deprecate swapaccounting=0 mode mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled mm/secretmem: remove reduntant return value mm/hugetlb: add available_huge_pages() func mm: remove unused inline functions from include/linux/mm_inline.h selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd selftests/vm: add thp collapse shmem testing selftests/vm: add thp collapse file and tmpfs testing selftests/vm: modularize thp collapse memory operations selftests/vm: dedup THP helpers mm/khugepaged: add tracepoint to hpage_collapse_scan_file() mm/madvise: add file and shmem support to MADV_COLLAPSE ...

mm: hugetlb: eliminate memory-less nodes handling

2022-10-03T21:03:15Z

The memory-notify-based approach aims to handle meory-less nodes, however, it just adds the complexity of code as pointed by David in thread [1]. The handling of memory-less nodes is introduced by commit 4faf8d950ec4 ("hugetlb: handle memory hot-plug events"). >From its commit message, we cannot find any necessity of handling this case. So, we can simply register/unregister sysfs entries in register_node/unregister_node to simlify the code. BTW, hotplug callback added because in hugetlb_register_all_nodes() we register sysfs nodes only for N_MEMORY nodes, seeing commit 9b5e5d0fdc91, which said it was a preparation for handling memory-less nodes via memory hotplug. Since we want to remove memory hotplug, so make sure we only register per-node sysfs for online (N_ONLINE) nodes in hugetlb_register_all_nodes(). https://lore.kernel.org/linux-mm/60933ffc-b850-976c-78a0-0ee6e0ea9ef0@redhat.com/ [1] Link: https://lkml.kernel.org/r/20220914072603.60293-3-songmuchun@bytedance.com Suggested-by: David Hildenbrand Signed-off-by: Muchun Song Acked-by: David Hildenbrand Cc: Andi Kleen Cc: Greg Kroah-Hartman Cc: Mike Kravetz Cc: Oscar Salvador Cc: Rafael J. Wysocki Signed-off-by: Andrew Morton

mm: hugetlb: simplify per-node sysfs creation and removal

2022-10-03T21:03:15Z

Patch series "simplify handling of per-node sysfs creation and removal", v4. This patch (of 2): The following commit offload per-node sysfs creation and removal to a kworker and did not say why it is needed. And it also said "I don't know that this is absolutely required". It seems like the author was not sure as well. Since it only complicates the code, this patch will revert the changes to simplify the code. 39da08cb074c ("hugetlb: offload per node attribute registrations") We could use memory hotplug notifier to do per-node sysfs creation and removal instead of inserting those operations to node registration and unregistration. Then, it can reduce the code coupling between node.c and hugetlb.c. Also, it can simplify the code. Link: https://lkml.kernel.org/r/20220914072603.60293-1-songmuchun@bytedance.com Link: https://lkml.kernel.org/r/20220914072603.60293-2-songmuchun@bytedance.com Signed-off-by: Muchun Song Acked-by: Mike Kravetz Acked-by: David Hildenbrand Cc: Andi Kleen Cc: Greg Kroah-Hartman Cc: Muchun Song Cc: Oscar Salvador Cc: Rafael J. Wysocki Signed-off-by: Andrew Morton

mm: add NR_SECONDARY_PAGETABLE to count secondary page table uses.

2022-08-24T20:51:42Z

We keep track of several kernel memory stats (total kernel memory, page tables, stack, vmalloc, etc) on multiple levels (global, per-node, per-memcg, etc). These stats give insights to users to how much memory is used by the kernel and for what purposes. Currently, memory used by KVM mmu is not accounted in any of those kernel memory stats. This patch series accounts the memory pages used by KVM for page tables in those stats in a new NR_SECONDARY_PAGETABLE stat. This stat can be later extended to account for other types of secondary pages tables (e.g. iommu page tables). KVM has a decent number of large allocations that aren't for page tables, but for most of them, the number/size of those allocations scales linearly with either the number of vCPUs or the amount of memory assigned to the VM. KVM's secondary page table allocations do not scale linearly, especially when nested virtualization is in use. From a KVM perspective, NR_SECONDARY_PAGETABLE will scale with KVM's per-VM pages_{4k,2m,1g} stats unless the guest is doing something bizarre (e.g. accessing only 4kb chunks of 2mb pages so that KVM is forced to allocate a large number of page tables even though the guest isn't accessing that much memory). However, someone would need to either understand how KVM works to make that connection, or know (or be told) to go look at KVM's stats if they're running VMs to better decipher the stats. Furthermore, having NR_PAGETABLE side-by-side with NR_SECONDARY_PAGETABLE is informative. For example, when backing a VM with THP vs. HugeTLB, NR_SECONDARY_PAGETABLE is roughly the same, but NR_PAGETABLE is an order of magnitude higher with THP. So having this stat will at the very least prove to be useful for understanding tradeoffs between VM backing types, and likely even steer folks towards potential optimizations. The original discussion with more details about the rationale: https://lore.kernel.org/all/87ilqoi77b.wl-maz@kernel.org This stat will be used by subsequent patches to count KVM mmu memory usage. Signed-off-by: Yosry Ahmed Acked-by: Shakeel Butt Acked-by: Marc Zyngier Link: https://lore.kernel.org/r/20220823004639.2387269-2-yosryahmed@google.com Signed-off-by: Sean Christopherson

drivers/base: fix userspace break from using bin_attributes for cpumap and cpulist

2022-07-15T15:36:33Z

Using bin_attributes with a 0 size causes fstat and friends to return that 0 size. This breaks userspace code that retrieves the size before reading the file. Rather than reverting 75bd50fa841 ("drivers/base/node.c: use bin_attribute to break the size limitation of cpumap ABI") let's put in a size value at compile time. For cpulist the maximum size is on the order of NR_CPUS * (ceil(log10(NR_CPUS)) + 1)/2 which for 8192 is 20480 (8192 * 5)/2. In order to get near that you'd need a system with every other CPU on one node. For example: (0,2,4,8, ... ). To simplify the math and support larger NR_CPUS in the future we are using (NR_CPUS * 7)/2. We also set it to a min of PAGE_SIZE to retain the older behavior for smaller NR_CPUS. The cpumap file the size works out to be NR_CPUS/4 + NR_CPUS/32 - 1 (or NR_CPUS * 9/32 - 1) including the ","s. Add a set of macros for these values to cpumask.h so they can be used in multiple places. Apply these to the handful of such files in drivers/base/topology.c as well as node.c. As an example, on an 80 cpu 4-node system (NR_CPUS == 8192): before: -r--r--r--. 1 root root 0 Jul 12 14:08 system/node/node0/cpulist -r--r--r--. 1 root root 0 Jul 11 17:25 system/node/node0/cpumap after: -r--r--r--. 1 root root 28672 Jul 13 11:32 system/node/node0/cpulist -r--r--r--. 1 root root 4096 Jul 13 11:31 system/node/node0/cpumap CONFIG_NR_CPUS = 16384 -r--r--r--. 1 root root 57344 Jul 13 14:03 system/node/node0/cpulist -r--r--r--. 1 root root 4607 Jul 13 14:02 system/node/node0/cpumap The actual number of cpus doesn't matter for the reported size since they are based on NR_CPUS. Fixes: 75bd50fa841d ("drivers/base/node.c: use bin_attribute to break the size limitation of cpumap ABI") Fixes: bb9ec13d156e ("topology: use bin_attribute to break the size limitation of cpumap ABI") Cc: Greg Kroah-Hartman Cc: "Rafael J. Wysocki" Cc: Yury Norov Cc: stable@vger.kernel.org Acked-by: Yury Norov (for include/linux/cpumask.h) Signed-off-by: Phil Auld Link: https://lore.kernel.org/r/20220715134924.3466194-1-pauld@redhat.com Signed-off-by: Greg Kroah-Hartman

drivers/base/node.c: fix compaction sysfs file leak

2022-04-29T06:16:06Z

Compaction sysfs file is created via compaction_register_node in register_node. But we forgot to remove it in unregister_node. Thus compaction sysfs file is leaked. Using compaction_unregister_node to fix this issue. Link: https://lkml.kernel.org/r/20220401070905.43679-1-linmiaohe@huawei.com Fixes: ed4a6d7f0676 ("mm: compaction: add /sys trigger for per-node memory compaction") Signed-off-by: Miaohe Lin Cc: Greg Kroah-Hartman Cc: Rafael J. Wysocki Cc: Mel Gorman Cc: Minchan Kim Cc: KAMEZAWA Hiroyuki Cc: KOSAKI Motohiro Signed-off-by: Andrew Morton

drivers/base/memory: determine and store zone for single-zone memory blocks

2022-03-22T22:57:10Z

test_pages_in_a_zone() is just another nasty PFN walker that can easily stumble over ZONE_DEVICE memory ranges falling into the same memory block as ordinary system RAM: the memmap of parts of these ranges might possibly be uninitialized. In fact, we observed (on an older kernel) with UBSAN: UBSAN: Undefined behaviour in ./include/linux/mm.h:1133:50 index 7 is out of range for type 'zone [5]' CPU: 121 PID: 35603 Comm: read_all Kdump: loaded Tainted: [...] Hardware name: Dell Inc. PowerEdge R7425/08V001, BIOS 1.12.2 11/15/2019 Call Trace: dump_stack+0x9a/0xf0 ubsan_epilogue+0x9/0x7a __ubsan_handle_out_of_bounds+0x13a/0x181 test_pages_in_a_zone+0x3c4/0x500 show_valid_zones+0x1fa/0x380 dev_attr_show+0x43/0xb0 sysfs_kf_seq_show+0x1c5/0x440 seq_read+0x49d/0x1190 vfs_read+0xff/0x300 ksys_read+0xb8/0x170 do_syscall_64+0xa5/0x4b0 entry_SYSCALL_64_after_hwframe+0x6a/0xdf RIP: 0033:0x7f01f4439b52 We seem to stumble over a memmap that contains a garbage zone id. While we could try inserting pfn_to_online_page() calls, it will just make memory offlining slower, because we use test_pages_in_a_zone() to make sure we're offlining pages that all belong to the same zone. Let's just get rid of this PFN walker and determine the single zone of a memory block -- if any -- for early memory blocks during boot. For memory onlining, we know the single zone already. Let's avoid any additional memmap scanning and just rely on the zone information available during boot. For memory hot(un)plug, we only really care about memory blocks that: * span a single zone (and, thereby, a single node) * are completely System RAM (IOW, no holes, no ZONE_DEVICE) If one of these conditions is not met, we reject memory offlining. Hotplugged memory blocks (starting out offline), always meet both conditions. There are three scenarios to handle: (1) Memory hot(un)plug A memory block with zone == NULL cannot be offlined, corresponding to our previous test_pages_in_a_zone() check. After successful memory onlining/offlining, we simply set the zone accordingly. * Memory onlining: set the zone we just used for onlining * Memory offlining: set zone = NULL So a hotplugged memory block starts with zone = NULL. Once memory onlining is done, we set the proper zone. (2) Boot memory with !CONFIG_NUMA We know that there is just a single pgdat, so we simply scan all zones of that pgdat for an intersection with our memory block PFN range when adding the memory block. If more than one zone intersects (e.g., DMA and DMA32 on x86 for the first memory block) we set zone = NULL and consequently mimic what test_pages_in_a_zone() used to do. (3) Boot memory with CONFIG_NUMA At the point in time we create the memory block devices during boot, we don't know yet which nodes *actually* span a memory block. While we could scan all zones of all nodes for intersections, overlapping nodes complicate the situation and scanning all nodes is possibly expensive. But that problem has already been solved by the code that sets the node of a memory block and creates the link in the sysfs -- do_register_memory_block_under_node(). So, we hook into the code that sets the node id for a memory block. If we already have a different node id set for the memory block, we know that multiple nodes *actually* have PFNs falling into our memory block: we set zone = NULL and consequently mimic what test_pages_in_a_zone() used to do. If there is no node id set, we do the same as (2) for the given node. Note that the call order in driver_init() is: -> memory_dev_init(): create memory block devices -> node_dev_init(): link memory block devices to the node and set the node id So in summary, we detect if there is a single zone responsible for this memory block and we consequently store the zone in that case in the memory block, updating it during memory onlining/offlining. Link: https://lkml.kernel.org/r/20220210184359.235565-3-david@redhat.com Signed-off-by: David Hildenbrand Reported-by: Rafael Parra Reviewed-by: Oscar Salvador Cc: "Rafael J. Wysocki" Cc: Greg Kroah-Hartman Cc: Michal Hocko Cc: Rafael Parra Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

drivers/base/node: rename link_mem_sections() to register_memory_block_under_node()

2022-03-22T22:57:10Z

Patch series "drivers/base/memory: determine and store zone for single-zone memory blocks", v2. I remember talking to Michal in the past about removing test_pages_in_a_zone(), which we use for: * verifying that a memory block we intend to offline is really only managed by a single zone. We don't support offlining of memory blocks that are managed by multiple zones (e.g., multiple nodes, DMA and DMA32) * exposing that zone to user space via /sys/devices/system/memory/memory*/valid_zones Now that I identified some more cases where test_pages_in_a_zone() might go wrong, and we received an UBSAN report (see patch #3), let's get rid of this PFN walker. So instead of detecting the zone at runtime with test_pages_in_a_zone() by scanning the memmap, let's determine and remember for each memory block if it's managed by a single zone. The stored zone can then be used for the above two cases, avoiding a manual lookup using test_pages_in_a_zone(). This avoids eventually stumbling over uninitialized memmaps in corner cases, especially when ZONE_DEVICE ranges partly fall into memory block (that are responsible for managing System RAM). Handling memory onlining is easy, because we online to exactly one zone. Handling boot memory is more tricky, because we want to avoid scanning all zones of all nodes to detect possible zones that overlap with the physical memory region of interest. Fortunately, we already have code that determines the applicable nodes for a memory block, to create sysfs links -- we'll hook into that. Patch #1 is a simple cleanup I had laying around for a longer time. Patch #2 contains the main logic to remove test_pages_in_a_zone() and further details. [1] https://lkml.kernel.org/r/20220128144540.153902-1-david@redhat.com [2] https://lkml.kernel.org/r/20220203105212.30385-1-david@redhat.com This patch (of 2): Let's adjust the stale terminology, making it match unregister_memory_block_under_nodes() and do_register_memory_block_under_node(). We're dealing with memory block devices, which span 1..X memory sections. Link: https://lkml.kernel.org/r/20220210184359.235565-1-david@redhat.com Link: https://lkml.kernel.org/r/20220210184359.235565-2-david@redhat.com Signed-off-by: David Hildenbrand Acked-by: Oscar Salvador Cc: Greg Kroah-Hartman Cc: Michal Hocko Cc: "Rafael J. Wysocki" Cc: Rafael Parra Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

drivers/base/node: consolidate node device subsystem initialization in node_dev_init()

2022-03-22T22:57:10Z

... and call node_dev_init() after memory_dev_init() from driver_init(), so before any of the existing arch/subsys calls. All online nodes should be known at that point: early during boot, arch code determines node and zone ranges and sets the relevant nodes online; usually this happens in setup_arch(). This is in line with memory_dev_init(), which initializes the memory device subsystem and creates all memory block devices. Similar to memory_dev_init(), panic() if anything goes wrong, we don't want to continue with such basic initialization errors. The important part is that node_dev_init() gets called after memory_dev_init() and after cpu_dev_init(), but before any of the relevant archs call register_cpu() to register the new cpu device under the node device. The latter should be the case for the current users of topology_init(). Link: https://lkml.kernel.org/r/20220203105212.30385-1-david@redhat.com Signed-off-by: David Hildenbrand Reviewed-by: Oscar Salvador Tested-by: Anatoly Pugachev (sparc64) Cc: Greg Kroah-Hartman Cc: Michal Hocko Cc: Oscar Salvador Cc: Mike Rapoport Cc: Catalin Marinas Cc: Will Deacon Cc: Thomas Bogendoerfer Cc: Michael Ellerman Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Paul Walmsley Cc: Palmer Dabbelt Cc: Albert Ou Cc: Heiko Carstens Cc: Vasily Gorbik Cc: Yoshinori Sato Cc: Rich Felker Cc: "David S. Miller" Cc: Thomas Gleixner Cc: Ingo Molnar Cc: Borislav Petkov Cc: Dave Hansen Cc: "Rafael J. Wysocki" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

x86/sgx: Add an attribute for the amount of SGX memory in a NUMA node

2021-12-09T15:02:22Z

== Problem == The amount of SGX memory on a system is determined by the BIOS and it varies wildly between systems. It can be as small as dozens of MB's and as large as many GB's on servers. Just like how applications need to know how much regular RAM is available, enclave builders need to know how much SGX memory an enclave can consume. == Solution == Introduce a new sysfs file: /sys/devices/system/node/nodeX/x86/sgx_total_bytes to enumerate the amount of SGX memory available in each NUMA node. This serves the same function for SGX as /proc/meminfo or /sys/devices/system/node/nodeX/meminfo does for normal RAM. 'sgx_total_bytes' is needed today to help drive the SGX selftests. SGX-specific swap code is exercised by creating overcommitted enclaves which are larger than the physical SGX memory on the system. They currently use a CPUID-based approach which can diverge from the actual amount of SGX memory available. 'sgx_total_bytes' ensures that the selftests can work efficiently and do not attempt stupid things like creating a 100,000 MB enclave on a system with 128 MB of SGX memory. == Implementation Details == Introduce CONFIG_HAVE_ARCH_NODE_DEV_GROUP opt-in flag to expose an arch specific attribute group, and add an attribute for the amount of SGX memory in bytes to each NUMA node: == ABI Design Discussion == As opposed to the per-node ABI, a single, global ABI was considered. However, this would prevent enclaves from being able to size themselves so that they fit on a single NUMA node. Essentially, a single value would rule out NUMA optimizations for enclaves. Create a new "x86/" directory inside each "nodeX/" sysfs directory. 'sgx_total_bytes' is expected to be the first of at least a few sgx-specific files to be placed in the new directory. Just scanning /proc/meminfo, these are the no-brainers that we have for RAM, but we need for SGX: MemTotal: xxxx kB // sgx_total_bytes (implemented here) MemFree: yyyy kB // sgx_free_bytes SwapTotal: zzzz kB // sgx_swapped_bytes So, at *least* three. I think we will eventually end up needing something more along the lines of a dozen. A new directory (as opposed to being in the nodeX/ "root") directory avoids cluttering the root with several "sgx_*" files. Place the new file in a new "nodeX/x86/" directory because SGX is highly x86-specific. It is very unlikely that any other architecture (or even non-Intel x86 vendor) will ever implement SGX. Using "sgx/" as opposed to "x86/" was also considered. But, there is a real chance this can get used for other arch-specific purposes. [ dhansen: rewrite changelog ] Signed-off-by: Jarkko Sakkinen Signed-off-by: Dave Hansen Acked-by: Greg Kroah-Hartman Acked-by: Borislav Petkov Link: https://lkml.kernel.org/r/20211116162116.93081-2-jarkko@kernel.org