user/sven/linux.git/drivers/base/power/runtime.c, branch v5.15.57

PM: runtime: Redefine pm_runtime_release_supplier()

2022-07-12T14:35:09Z

commit 07358194badf73e267289b40b761f5dc56928eab upstream. Instead of passing an extra bool argument to pm_runtime_release_supplier(), make its callers take care of triggering a runtime-suspend of the supplier device as needed. No expected functional impact. Suggested-by: Greg Kroah-Hartman Signed-off-by: Rafael J. Wysocki Reviewed-by: Greg Kroah-Hartman Cc: 5.1+ # 5.1+ Signed-off-by: Greg Kroah-Hartman

PM: runtime: Add safety net to supplier device release

2022-01-27T10:04:44Z

[ Upstream commit d1579e61192e0e686faa4208500ef4c3b529b16c ] Because refcount_dec_not_one() returns true if the target refcount becomes saturated, it is generally unsafe to use its return value as a loop termination condition, but that is what happens when a device link's supplier device is released during runtime PM suspend operations and on device link removal. To address this, introduce pm_runtime_release_supplier() to be used in the above cases which will check the supplier device's runtime PM usage counter in addition to the refcount_dec_not_one() return value, so the loop can be terminated in case the rpm_active refcount value becomes invalid, and update the code in question to use it as appropriate. This change is not expected to have any visible functional impact. Reported-by: Peter Zijlstra Signed-off-by: Rafael J. Wysocki Acked-by: Greg Kroah-Hartman Acked-by: Peter Zijlstra (Intel) Signed-off-by: Sasha Levin

PM: runtime: add devm_pm_runtime_enable helper

2021-08-26T18:27:51Z

A typical code pattern for pm_runtime_enable() call is to call it in the _probe function and to call pm_runtime_disable() both from _probe error path and from _remove function. For some drivers the whole remove function would consist of the call to pm_remove_disable(). Add helper function to replace this bolierplate piece of code. Calling devm_pm_runtime_enable() removes the need for calling pm_runtime_disable() both in the probe()'s error path and in the remove() function. Signed-off-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20210731195034.979084-2-dmitry.baryshkov@linaro.org Acked-by: Rafael J. Wysocki Signed-off-by: Stephen Boyd

PM: runtime: Allow unassigned ->runtime_suspend|resume callbacks

2021-06-11T17:03:01Z

We are currently allowing ->runtime_idle() callbacks to be unassigned without returning an error code from rpm_idle(). This has been useful to avoid boilerplate code in drivers. Let's take this approach a step further, by allowing also unassigned ->runtime_suspend|resume() callbacks. In this way, a consumer/supplier device link can be used to let a consumer device be power managed through its supplier device, without requiring assigned ->runtime_suspend|resume() callbacks for the consumer device, for example. Signed-off-by: Ulf Hansson Acked-by: Alan Stern Signed-off-by: Rafael J. Wysocki

PM: runtime: Improve path in rpm_idle() when no callback

2021-06-11T17:03:01Z

When pm_runtime_no_callbacks() has been called for a struct device to set the dev->power.no_callbacks flag for it, it enables rpm_idle() to take a slightly quicker path by assuming that a ->runtime_idle() callback would have returned 0 to indicate success. A device that does not have the dev->power.no_callbacks flag set for it, may still be missing a corresponding ->runtime_idle() callback, in which case the slower path in rpm_idle() is taken. Let's improve the behaviour for this case, by aligning code to the quicker path. Signed-off-by: Ulf Hansson Acked-by: Alan Stern Signed-off-by: Rafael J. Wysocki

PM: runtime: Fix unpaired parent child_count for force_resume

2021-05-10T17:14:01Z

As pm_runtime_need_not_resume() relies also on usage_count, it can return a different value in pm_runtime_force_suspend() compared to when called in pm_runtime_force_resume(). Different return values can happen if anything calls PM runtime functions in between, and causes the parent child_count to increase on every resume. So far I've seen the issue only for omapdrm that does complicated things with PM runtime calls during system suspend for legacy reasons: omap_atomic_commit_tail() for omapdrm.0 dispc_runtime_get() wakes up 58000000.dss as it's the dispc parent dispc_runtime_resume() rpm_resume() increases parent child_count dispc_runtime_put() won't idle, PM runtime suspend blocked pm_runtime_force_suspend() for 58000000.dss, !pm_runtime_need_not_resume() __update_runtime_status() system suspended pm_runtime_force_resume() for 58000000.dss, pm_runtime_need_not_resume() pm_runtime_enable() only called because of pm_runtime_need_not_resume() omap_atomic_commit_tail() for omapdrm.0 dispc_runtime_get() wakes up 58000000.dss as it's the dispc parent dispc_runtime_resume() rpm_resume() increases parent child_count dispc_runtime_put() won't idle, PM runtime suspend blocked ... rpm_suspend for 58000000.dss but parent child_count is now unbalanced Let's fix the issue by adding a flag for needs_force_resume and use it in pm_runtime_force_resume() instead of pm_runtime_need_not_resume(). Additionally omapdrm system suspend could be simplified later on to avoid lots of unnecessary PM runtime calls and the complexity it adds. The driver can just use internal functions that are shared between the PM runtime and system suspend related functions. Fixes: 4918e1f87c5f ("PM / runtime: Rework pm_runtime_force_suspend/resume()") Signed-off-by: Tony Lindgren Reviewed-by: Ulf Hansson Tested-by: Tomi Valkeinen Cc: 4.16+ # 4.16+ Signed-off-by: Rafael J. Wysocki

PM: runtime: remove kernel-doc warnings

2021-04-07T17:21:09Z

remove make W=1 warnings drivers/base/power/runtime.c:926: warning: Function parameter or member 'timer' not described in 'pm_suspend_timer_fn' drivers/base/power/runtime.c:926: warning: Excess function parameter 'data' description in 'pm_suspend_timer_fn' Signed-off-by: Pierre-Louis Bossart Signed-off-by: Rafael J. Wysocki

PM: runtime: Fix race getting/putting suppliers at probe

2021-03-29T17:27:09Z

pm_runtime_put_suppliers() must not decrement rpm_active unless the consumer is suspended. That is because, otherwise, it could suspend suppliers for an active consumer. That can happen as follows: static int driver_probe_device(struct device_driver *drv, struct device *dev) { int ret = 0; if (!device_is_registered(dev)) return -ENODEV; dev->can_match = true; pr_debug("bus: '%s': %s: matched device %s with driver %s\n", drv->bus->name, __func__, dev_name(dev), drv->name); pm_runtime_get_suppliers(dev); if (dev->parent) pm_runtime_get_sync(dev->parent); At this point, dev can runtime suspend so rpm_put_suppliers() can run, rpm_active becomes 1 (the lowest value). pm_runtime_barrier(dev); if (initcall_debug) ret = really_probe_debug(dev, drv); else ret = really_probe(dev, drv); Probe callback can have runtime resumed dev, and then runtime put so dev is awaiting autosuspend, but rpm_active is 2. pm_request_idle(dev); if (dev->parent) pm_runtime_put(dev->parent); pm_runtime_put_suppliers(dev); Now pm_runtime_put_suppliers() will put the supplier i.e. rpm_active 2 -> 1, but consumer can still be active. return ret; } Fix by checking the runtime status. For any status other than RPM_SUSPENDED, rpm_active can be considered to be "owned" by rpm_[get/put]_suppliers() and pm_runtime_put_suppliers() need do nothing. Reported-by: Asutosh Das Fixes: 4c06c4e6cf63 ("driver core: Fix possible supplier PM-usage counter imbalance") Signed-off-by: Adrian Hunter Cc: 5.1+ # 5.1+ Signed-off-by: Rafael J. Wysocki

PM: runtime: Fix ordering in pm_runtime_get_suppliers()

2021-03-29T17:27:09Z

rpm_active indicates how many times the supplier usage_count has been incremented. Consequently it must be updated after pm_runtime_get_sync() of the supplier, not before. Fixes: 4c06c4e6cf63 ("driver core: Fix possible supplier PM-usage counter imbalance") Signed-off-by: Adrian Hunter Cc: 5.1+ # 5.1+ Signed-off-by: Rafael J. Wysocki

PM: runtime: Defer suspending suppliers

2021-03-22T14:21:38Z

Because the PM-runtime status of the device is not updated in __rpm_callback(), attempts to suspend the suppliers of the given device triggered by the rpm_put_suppliers() call in there may cause a supplier to be suspended completely before the status of the consumer is updated to RPM_SUSPENDED, which is confusing. To avoid that (1) modify __rpm_callback() to only decrease the PM-runtime usage counter of each supplier and (2) make rpm_suspend() try to suspend the suppliers after changing the consumer's status to RPM_SUSPENDED, in analogy with the device's parent. Link: https://lore.kernel.org/linux-pm/CAPDyKFqm06KDw_p8WXsM4dijDbho4bb6T4k50UqqvR1_COsp8g@mail.gmail.com/ Fixes: 21d5c57b3726 ("PM / runtime: Use device links") Reported-by: elaine.zhang Diagnosed-by: Ulf Hansson Reviewed-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki