user/sven/linux.git/drivers/base/power/runtime.c, branch v5.7

PM: runtime: Add pm_runtime_get_if_active()

2020-03-04T10:01:18Z

pm_runtime_get_if_in_use() bumps up the PM-runtime usage count if it is not equal to zero and the device's PM-runtime status is 'active'. This works for drivers that do not use autoidle, but for those that do, the function returns zero even when the device is active. In order to maintain sane device state while the device is powered on in the hope that it'll be needed, pm_runtime_get_if_active(dev, true) returns a positive value if the device's PM-runtime status is 'active' when it is called, in which case it also increments the device's usage count. If the second argument of pm_runtime_get_if_active() is 'false', the function behaves just like pm_runtime_get_if_in_use(), so redefine the latter as a wrapper around the former. Signed-off-by: Sakari Ailus [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki

PM-runtime: add tracepoints for usage_count changes

2020-01-13T11:28:29Z

Add tracepoints to remaining places where device's power.usage_count is changed. This helps debugging where and why autosuspend is prevented. Signed-off-by: Michał Mirosław Signed-off-by: Rafael J. Wysocki

Merge tag 'driver-core-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2019-09-18T17:04:39Z

Pull driver core updates from Greg Kroah-Hartman: "Here is the big driver core update for 5.4-rc1. There was a bit of a churn in here, with a number of core and OF platform patches being added to the tree, and then after much discussion and review and a day-long in-person meeting, they were decided to be reverted and a new set of patches is currently being reviewed on the mailing list. Other than that churn, there are two "persistent" branches in here that other trees will be pulling in as well during the merge window. One branch to add support for drivers to have the driver core automatically add sysfs attribute files when a driver is bound to a device so that the driver doesn't have to manually do it (and then clean it up, as it always gets it wrong). There's another branch in here for generic lookup helpers for the driver core that lots of busses are starting to use. That's the majority of the non-driver-core changes in this patch series. There's also some on-going debugfs file creation cleanup that has been slowly happening over the past few releases, with the goal to hopefully get that done sometime next year. All of these have been in linux-next for a while now with no reported issues" [ Note that the above-mentioned generic lookup helpers branch was already brought in by the LED merge (commit 4feaab05dc1e) that had shared it. Also note that that common branch introduced an i2c bug due to a bad conversion, which got fixed here. - Linus ] * tag 'driver-core-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (49 commits) coccinelle: platform_get_irq: Fix parse error driver-core: add include guard to linux/container.h sysfs: add BIN_ATTR_WO() macro driver core: platform: Export platform_get_irq_optional() hwmon: pwm-fan: Use platform_get_irq_optional() driver core: platform: Introduce platform_get_irq_optional() Revert "driver core: Add support for linking devices during device addition" Revert "driver core: Add edit_links() callback for drivers" Revert "of/platform: Add functional dependency link from DT bindings" Revert "driver core: Add sync_state driver/bus callback" Revert "of/platform: Pause/resume sync state during init and of_platform_populate()" Revert "of/platform: Create device links for all child-supplier depencencies" Revert "of/platform: Don't create device links for default busses" Revert "of/platform: Fix fn definitons for of_link_is_valid() and of_link_property()" Revert "of/platform: Fix device_links_supplier_sync_state_resume() warning" Revert "of/platform: Disable generic device linking code for PowerPC" devcoredump: fix typo in comment devcoredump: use memory_read_from_buffer of/platform: Disable generic device linking code for PowerPC device.h: Fix warnings for mismatched parameter names in comments ...

driver/core: Convert to use built-in RCU list checking

2019-08-13T21:28:47Z

This commit applies the consolidated hlist_for_each_entry_rcu() support for lockdep conditions. Acked-by: Greg Kroah-Hartman Signed-off-by: Joel Fernandes (Google) Signed-off-by: Paul E. McKenney

driver core: Remove device link creation limitation

2019-07-25T11:31:18Z

If device_link_add() is called for a consumer/supplier pair with an existing device link between them and the existing link's type is not in agreement with the flags passed to that function by its caller, NULL will be returned. That is seriously inconvenient, because it forces the callers of device_link_add() to worry about what others may or may not do even if that is not relevant to them for any other reasons. It turns out, however, that this limitation can be made go away relatively easily. The underlying observation is that if DL_FLAG_STATELESS has been passed to device_link_add() in flags for the given consumer/supplier pair at least once, calling either device_link_del() or device_link_remove() to release the link returned by it should work, but there are no other requirements associated with that flag. In turn, if at least one of the callers of device_link_add() for the given consumer/supplier pair has not passed DL_FLAG_STATELESS to it in flags, the driver core should track the status of the link and act on it as appropriate (ie. the link should be treated as "managed"). This means that DL_FLAG_STATELESS needs to be set for managed device links and it should be valid to call device_link_del() or device_link_remove() to drop references to them in certain sutiations. To allow that to happen, introduce a new (internal) device link flag called DL_FLAG_MANAGED and make device_link_add() set it automatically whenever DL_FLAG_STATELESS is not passed to it. Also make it take additional references to existing device links that were previously stateless (that is, with DL_FLAG_STATELESS set and DL_FLAG_MANAGED unset) and will need to be managed going forward and initialize their status (which has been DL_STATE_NONE so far). Accordingly, when a managed device link is dropped automatically by the driver core, make it clear DL_FLAG_MANAGED, reset the link's status back to DL_STATE_NONE and drop the reference to it associated with DL_FLAG_MANAGED instead of just deleting it right away (to allow it to stay around in case it still needs to be released explicitly by someone). With that, since setting DL_FLAG_STATELESS doesn't mean that the device link in question is not managed any more, replace all of the status-tracking checks against DL_FLAG_STATELESS with analogous checks against DL_FLAG_MANAGED and update the documentation to reflect these changes. While at it, make device_link_add() reject flags that it does not recognize, including DL_FLAG_MANAGED. Signed-off-by: Rafael J. Wysocki Reviewed-by: Saravana Kannan Tested-by: Marek Szyprowski Review-by: Saravana Kannan Link: https://lore.kernel.org/r/2305283.AStDPdUUnE@kreacher Signed-off-by: Greg Kroah-Hartman

PM / QOS: Rename __dev_pm_qos_read_value() and dev_pm_qos_raw_read_value()

2019-07-04T08:40:54Z

dev_pm_qos_read_value() will soon need to support more constraint types (min/max frequency) and will have another argument to it, i.e. type of the constraint. While that is fine for the existing users of dev_pm_qos_read_value(), but not that optimal for the callers of __dev_pm_qos_read_value() and dev_pm_qos_raw_read_value() as all the callers of these two routines are only looking for resume latency constraint. Lets make these two routines care only about the resume latency constraint and rename them to __dev_pm_qos_resume_latency() and dev_pm_qos_raw_resume_latency(). Suggested-by: Rafael J. Wysocki Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki

drivers: base: power: add proper SPDX identifiers on files that did not have them.

2019-04-04T18:03:40Z

There were a few files in the driver core power code that did not have SPDX identifiers on them, so fix that up. At the same time, remove the "free form" text that specified the license of the file, as that is impossible for any tool to properly parse. Cc: "Rafael J. Wysocki" Signed-off-by: Greg Kroah-Hartman

Merge tag 'pm-5.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2019-03-14T17:30:06Z

Pull more power management updates from Rafael Wysocki: "These are mostly fixes and cleanups on top of the previously merged power management material for 5.1-rc1 with one cpupower utility update that wasn't pushed earlier due to unfortunate timing. Specifics: - Fix registration of new cpuidle governors partially broken during the 5.0 development cycle by mistake (Rafael Wysocki). - Avoid integer overflows in the menu cpuidle governor by making it discard the overflowing data points upfront (Rafael Wysocki). - Fix minor mistake in the recent update of the iowait boost computation in the intel_pstate driver (Rafael Wysocki). - Drop incorrect __init annotation from one function in the pxa2xx cpufreq driver (Arnd Bergmann). - Fix the operating performance points (OPP) framework initialization for devices in multiple power domains if only one of them is scalable (Rajendra Nayak). - Fix mistake in dev_pm_opp_set_rate() which causes it to skip updating the performance state if the new frequency is the same as the old one (Viresh Kumar). - Rework the cancellation of wakeup source timers to avoid potential issues with it and do some cleanups unlocked by that change (Viresh Kumar, Rafael Wysocki). - Clean up the code computing the active/suspended time of devices in the PM-runtime framework after recent changes (Ulf Hansson). - Make the power management infrastructure code use pr_fmt() consistently (Joe Perches). - Clean up the generic power domains (genpd) framework somewhat (Aisheng Dong). - Improve kerneldoc comments for two functions in the cpufreq core (Rafael Wysocki). - Fix typo in a PM QoS file description comment (Aisheng Dong). - Update the handling of CPU boost frequencies in the cpupower utility (Abhishek Goel)" * tag 'pm-5.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpuidle: governor: Add new governors to cpuidle_governors again cpufreq: intel_pstate: Fix up iowait_boost computation PM / OPP: Update performance state when freq == old_freq PM / wakeup: Drop wakeup_source_drop() PM / wakeup: Rework wakeup source timer cancellation PM / domains: Remove one unnecessary blank line PM / Domains: Return early for all errors in _genpd_power_off() PM / Domains: Improve warn for multiple states but no governor OPP: Fix handling of multiple power domains PM / QoS: Fix typo in file description cpufreq: pxa2xx: remove incorrect __init annotation PM-runtime: Call pm_runtime_active|suspended_time() from sysfs PM-runtime: Consolidate code to get active/suspended time PM: Add and use pr_fmt() cpufreq: Improve kerneldoc comments for cpufreq_cpu_get/put() cpuidle: menu: Avoid overflows when computing variance tools/power/cpupower: Display boost frequency separately

PM-runtime: Call pm_runtime_active|suspended_time() from sysfs

2019-03-07T10:23:17Z

Avoid the open-coding of the accounted time acquisition in runtime_active|suspend_time_show() and make them call pm_runtime_active|suspended_time() instead. Note that this change also indirectly avoids holding dev->power.lock around the do_div() computation and the sprintf() call which is an additional improvement. Signed-off-by: Ulf Hansson [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki

PM-runtime: Consolidate code to get active/suspended time

2019-03-07T10:23:17Z

In a step to consolidate the code for fetching the PM-runtime active/suspended time for a device, add a common function for that and make the existing pm_runtime_suspended_time() call it. Also add a corresponding pm_runtime_active_time() calling the new common function. Signed-off-by: Ulf Hansson [ rjw: Changelog, function rename ] Signed-off-by: Rafael J. Wysocki