user/sven/linux.git/drivers/base/power, branch v6.17.10

PM: sleep: core: Fix runtime PM enabling in device_resume_early()

2025-12-01T10:45:41Z

commit f384497a76ed9539f70f6e8fe81a193441c943d2 upstream. Runtime PM should only be enabled in device_resume_early() if it has been disabled for the given device by device_suspend_late(). Otherwise, it may cause runtime PM callbacks to run prematurely in some cases which leads to further functional issues. Make two changes to address this problem. First, reorder device_suspend_late() to only disable runtime PM for a device when it is going to look for the device's callback or if the device is a "syscore" one. In all of the other cases, disabling runtime PM for the device is not in fact necessary. However, if the device's callback returns an error and the power.is_late_suspended flag is not going to be set, enable runtime PM so it only remains disabled when power.is_late_suspended is set. Second, make device_resume_early() only enable runtime PM for the devices with the power.is_late_suspended flag set. Fixes: 443046d1ad66 ("PM: sleep: Make suspend of devices more asynchronous") Reported-by: Rose Wu Closes: https://lore.kernel.org/linux-pm/70b25dca6f8c2756d78f076f4a7dee7edaaffc33.camel@mediatek.com/ Cc: 6.16+ # 6.16+ Reviewed-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki Link: https://patch.msgid.link/12784270.O9o76ZdvQC@rafael.j.wysocki Signed-off-by: Greg Kroah-Hartman

PM: sleep: Do not wait on SYNC_STATE_ONLY device links

2025-10-19T14:37:07Z

[ Upstream commit 632d31067be2f414c57955efcf29c79290cc749b ] Device links with DL_FLAG_SYNC_STATE_ONLY should not affect system suspend and resume, and functions like device_reorder_to_tail() and device_link_add() don't try to reorder the consumers with that flag. However, dpm_wait_for_consumers() and dpm_wait_for_suppliers() don't check thas flag before triggering dpm_wait(), leading to potential hang during suspend/resume. This can be reproduced on MT8186 Corsola Chromebook with devicetree like: usb-a-connector { compatible = "usb-a-connector"; port { usb_a_con: endpoint { remote-endpoint = <&usb_hs>; }; }; }; usb_host { compatible = "mediatek,mt8186-xhci", "mediatek,mtk-xhci"; port { usb_hs: endpoint { remote-endpoint = <&usb_a_con>; }; }; }; In this case, the two nodes form a cycle and a SYNC_STATE_ONLY devlink between usb_host (supplier) and usb-a-connector (consumer) is created. Address this by exporting device_link_flag_is_sync_state_only() and making dpm_wait_for_consumers() and dpm_wait_for_suppliers() use it when deciding if dpm_wait() should be called. Fixes: 05ef983e0d65a ("driver core: Add device link support for SYNC_STATE_ONLY flag") Signed-off-by: Pin-yen Lin Link: https://patch.msgid.link/20250926102320.4053167-1-treapking@chromium.org [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

PM: core: Add two macros for walking device links

2025-10-19T14:37:07Z

[ Upstream commit 3ce3f569991347d2085925041f4932232da43bcf ] Add separate macros for walking links to suppliers and consumers of a device to help device links users to avoid exposing the internals of struct dev_links_info in their code and possible coding mistakes related to that. Accordingly, use the new macros to replace open-coded device links list walks in the core power management code. No intentional functional impact. Signed-off-by: Rafael J. Wysocki Reviewed-by: Ulf Hansson Acked-by: Greg Kroah-Hartman Link: https://patch.msgid.link/1944671.tdWV9SEqCh@rafael.j.wysocki Stable-dep-of: 632d31067be2 ("PM: sleep: Do not wait on SYNC_STATE_ONLY device links") Signed-off-by: Sasha Levin

PM: core: Annotate loops walking device links as _srcu

2025-10-19T14:37:07Z

[ Upstream commit fdd9ae23bb989fa9ed1beebba7d3e0c82c7c81ae ] Since SRCU is used for the protection of device link lists, the loops over device link lists in multiple places in drivers/base/power/main.c and in pm_runtime_get_suppliers() should be annotated as _srcu rather than as _rcu which is the case currently. Change the annotations accordingly. Signed-off-by: Rafael J. Wysocki Reviewed-by: Ulf Hansson Acked-by: Greg Kroah-Hartman Link: https://patch.msgid.link/2393512.ElGaqSPkdT@rafael.j.wysocki Stable-dep-of: 632d31067be2 ("PM: sleep: Do not wait on SYNC_STATE_ONLY device links") Signed-off-by: Sasha Levin

PM: sleep: core: Clear power.must_resume in noirq suspend error path

2025-10-15T10:03:24Z

[ Upstream commit be82483d1b60baf6747884bd74cb7de484deaf76 ] If system suspend is aborted in the "noirq" phase (for instance, due to an error returned by one of the device callbacks), power.is_noirq_suspended will not be set for some devices and device_resume_noirq() will return early for them. Consequently, noirq resume callbacks will not run for them at all because the noirq suspend callbacks have not run for them yet. If any of them has power.must_resume set and late suspend has been skipped for it (due to power.smart_suspend), early resume should be skipped for it either, or its state may become inconsistent (for instance, if the early resume assumes that it will always follow noirq resume). Make that happen by clearing power.must_resume in device_resume_noirq() for devices with power.is_noirq_suspended clear that have been left in suspend by device_suspend_late(), which will subsequently cause device_resume_early() to leave the device in suspend and avoid changing its state. Fixes: 0d4b54c6fee8 ("PM / core: Add LEAVE_SUSPENDED driver flag") Link: https://lore.kernel.org/linux-pm/5d692b81-6f58-4e86-9cb0-ede69a09d799@rowland.harvard.edu/ Signed-off-by: Rafael J. Wysocki Reviewed-by: Ulf Hansson Link: https://patch.msgid.link/3381776.aeNJFYEL58@rafael.j.wysocki Signed-off-by: Sasha Levin

PM: sleep: annotate RCU list iterations

2025-08-26T13:27:04Z

These iterations require the read lock, otherwise RCU lockdep will splat: ============================= WARNING: suspicious RCU usage 6.17.0-rc3-00014-g31419c045d64 #6 Tainted: G O ----------------------------- drivers/base/power/main.c:1333 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 5 locks held by rtcwake/547: #0: 00000000643ab418 (sb_writers#6){.+.+}-{0:0}, at: file_start_write+0x2b/0x3a #1: 0000000067a0ca88 (&of->mutex#2){+.+.}-{4:4}, at: kernfs_fop_write_iter+0x181/0x24b #2: 00000000631eac40 (kn->active#3){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x191/0x24b #3: 00000000609a1308 (system_transition_mutex){+.+.}-{4:4}, at: pm_suspend+0xaf/0x30b #4: 0000000060c0fdb0 (device_links_srcu){.+.+}-{0:0}, at: device_links_read_lock+0x75/0x98 stack backtrace: CPU: 0 UID: 0 PID: 547 Comm: rtcwake Tainted: G O 6.17.0-rc3-00014-g31419c045d64 #6 VOLUNTARY Tainted: [O]=OOT_MODULE Stack: 223721b3a80 6089eac6 00000001 00000001 ffffff00 6089eac6 00000535 6086e528 721b3ac0 6003c294 00000000 60031fc0 Call Trace: [<600407ed>] show_stack+0x10e/0x127 [<6003c294>] dump_stack_lvl+0x77/0xc6 [<6003c2fd>] dump_stack+0x1a/0x20 [<600bc2f8>] lockdep_rcu_suspicious+0x116/0x13e [<603d8ea1>] dpm_async_suspend_superior+0x117/0x17e [<603d980f>] device_suspend+0x528/0x541 [<603da24b>] dpm_suspend+0x1a2/0x267 [<603da837>] dpm_suspend_start+0x5d/0x72 [<600ca0c9>] suspend_devices_and_enter+0xab/0x736 [...] Add the fourth argument to the iteration to annotate this and avoid the splat. Fixes: 06799631d522 ("PM: sleep: Make async suspend handle suppliers like parents") Fixes: ed18738fff02 ("PM: sleep: Make async resume handle consumers like children") Signed-off-by: Johannes Berg Link: https://patch.msgid.link/20250826134348.aba79f6e6299.I9ecf55da46ccf33778f2c018a82e1819d815b348@changeid Signed-off-by: Rafael J. Wysocki

Merge tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel

2025-07-31T02:26:49Z

Pull drm updates from Dave Airlie: "Highlights: - Intel xe enable Panthor Lake, started adding WildCat Lake - amdgpu has a bunch of reset improvments along with the usual IP updates - msm got VM_BIND support which is important for vulkan sparse memory - more drm_panic users - gpusvm common code to handle a bunch of core SVM work outside drivers. Detail summary: Changes outside drm subdirectory: - 'shrink_shmem_memory()' for better shmem/hibernate interaction - Rust support infrastructure: - make ETIMEDOUT available - add size constants up to SZ_2G - add DMA coherent allocation bindings - mtd driver for Intel GPU non-volatile storage - i2c designware quirk for Intel xe core: - atomic helpers: tune enable/disable sequences - add task info to wedge API - refactor EDID quirks - connector: move HDR sink to drm_display_info - fourcc: half-float and 32-bit float formats - mode_config: pass format info to simplify dma-buf: - heaps: Give CMA heap a stable name ci: - add device tree validation and kunit displayport: - change AUX DPCD access probe address - add quirk for DPCD probe - add panel replay definitions - backlight control helpers fbdev: - make CONFIG_FIRMWARE_EDID available on all arches fence: - fix UAF issues format-helper: - improve tests gpusvm: - introduce devmem only flag for allocation - add timeslicing support to GPU SVM ttm: - improve eviction sched: - tracing improvements - kunit improvements - memory leak fixes - reset handling improvements color mgmt: - add hardware gamma LUT handling helpers bridge: - add destroy hook - switch to reference counted drm_bridge allocations - tc358767: convert to devm_drm_bridge_alloc - improve CEC handling panel: - switch to reference counter drm_panel allocations - fwnode panel lookup - Huiling hl055fhv028c support - Raspberry Pi 7" 720x1280 support - edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK - simple: AUO P238HAN01 - st7701: Winstar wf40eswaa6mnn0 - visionox: rm69299-shift - Renesas R61307, Renesas R69328 support - DJN HX83112B hdmi: - add CEC handling - YUV420 output support xe: - WildCat Lake support - Enable PanthorLake by default - mark BMG as SRIOV capable - update firmware recommendations - Expose media OA units - aux-bux support for non-volatile memory - MTD intel-dg driver for non-volatile memory - Expose fan control and voltage regulator in sysfs - restructure migration for multi-device - Restore GuC submit UAF fix - make GEM shrinker drm managed - SRIOV VF Post-migration recovery of GGTT nodes - W/A additions/reworks - Prefetch support for svm ranges - Don't allocate managed BO for each policy change - HWMON fixes for BMG - Create LRC BO without VM - PCI ID updates - make SLPC debugfs files optional - rework eviction rejection of bound external BOs - consolidate PAT programming logic for pre/post Xe2 - init changes for flicker-free boot - Enable GuC Dynamic Inhibit Context switch i915: - drm_panic support for i915/xe - initial flip queue off by default for LNL/PNL - Wildcat Lake Display support - Support for DSC fractional link bpp - Support for simultaneous Panel Replay and Adaptive sync - Support for PTL+ double buffer LUT - initial PIPEDMC event handling - drm_panel_follower support - DPLL interface renames - allocate struct intel_display dynamically - flip queue preperation - abstract DRAM detection better - avoid GuC scheduling stalls - remove DG1 force probe requirement - fix MEI interrupt handler on RT kernels - use backlight control helpers for eDP - more shared display code refactoring amdgpu: - add userq slot to INFO ioctl - SR-IOV hibernation support - Suspend improvements - Backlight improvements - Use scaling for non-native eDP modes - cleaner shader updates for GC 9.x - Remove fence slab - SDMA fw checks for userq support - RAS updates - DMCUB updates - DP tunneling fixes - Display idle D3 support - Per queue reset improvements - initial smartmux support amdkfd: - enable KFD on loongarch - mtype fix for ext coherent system memory radeon: - CS validation additional GL extensions - drop console lock during suspend/resume - bump driver version msm: - VM BIND support - CI: infrastructure updates - UBWC single source of truth - decouple GPU and KMS support - DP: rework I/O accessors - DPU: SM8750 support - DSI: SM8750 support - GPU: X1-45 support and speedbin support for X1-85 - MDSS: SM8750 support nova: - register! macro improvements - DMA object abstraction - VBIOS parser + fwsec lookup - sysmem flush page support - falcon: generic falcon boot code and HAL - FWSEC-FRTS: fb setup and load/execute ivpu: - Add Wildcat Lake support - Add turbo flag ast: - improve hardware generations implementation imx: - IMX8qxq Display Controller support lima: - Rockchip RK3528 GPU support nouveau: - fence handling cleanup panfrost: - MT8370 support - bo labeling - 64-bit register access qaic: - add RAS support rockchip: - convert inno_hdmi to a bridge rz-du: - add RZ/V2H(P) support - MIPI-DSI DCS support sitronix: - ST7567 support sun4i: - add H616 support tidss: - add TI AM62L support - AM65x OLDI bridge support bochs: - drm panic support vkms: - YUV and R* format support - use faux device vmwgfx: - fence improvements hyperv: - move out of simple - add drm_panic support" * tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits) drm/tidss: oldi: convert to devm_drm_bridge_alloc() API drm/tidss: encoder: convert to devm_drm_bridge_alloc() drm/amdgpu: move reset support type checks into the caller drm/amdgpu/sdma7: re-emit unprocessed state on ring reset drm/amdgpu/sdma6: re-emit unprocessed state on ring reset drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset drm/amdgpu/sdma5: re-emit unprocessed state on ring reset drm/amdgpu/gfx12: re-emit unprocessed state on ring reset drm/amdgpu/gfx11: re-emit unprocessed state on ring reset drm/amdgpu/gfx10: re-emit unprocessed state on ring reset drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset drm/amdgpu: Add WARN_ON to the resource clear function drm/amd/pm: Use cached metrics data on SMUv13.0.6 drm/amd/pm: Use cached data for min/max clocks gpu: nova-core: fix bounds check in PmuLookupTableEntry::new drm/amdgpu: Replace HQD terminology with slots naming drm/amdgpu: Add user queue instance count in HW IP info drm/amd/amdgpu: Add helper functions for isp buffers drm/amd/amdgpu: Initialize swnode for ISP MFD device ...

Merge tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core

2025-07-29T19:15:39Z

Pull driver core updates from Danilo Krummrich: "debugfs: - Remove unneeded debugfs_file_{get,put}() instances - Remove last remnants of debugfs_real_fops() - Allow storing non-const void * in struct debugfs_inode_info::aux sysfs: - Switch back to attribute_group::bin_attrs (treewide) - Switch back to bin_attribute::read()/write() (treewide) - Constify internal references to 'struct bin_attribute' Support cache-ids for device-tree systems: - Add arch hook arch_compact_of_hwid() - Use arch_compact_of_hwid() to compact MPIDR values on arm64 Rust: - Device: - Introduce CoreInternal device context (for bus internal methods) - Provide generic drvdata accessors for bus devices - Provide Driver::unbind() callbacks - Use the infrastructure above for auxiliary, PCI and platform - Implement Device::as_bound() - Rename Device::as_ref() to Device::from_raw() (treewide) - Implement fwnode and device property abstractions - Implement example usage in the Rust platform sample driver - Devres: - Remove the inner reference count (Arc) and use pin-init instead - Replace Devres::new_foreign_owned() with devres::register() - Require T to be Send in Devres - Initialize the data kept inside a Devres last - Provide an accessor for the Devres associated Device - Device ID: - Add support for ACPI device IDs and driver match tables - Split up generic device ID infrastructure - Use generic device ID infrastructure in net::phy - DMA: - Implement the dma::Device trait - Add DMA mask accessors to dma::Device - Implement dma::Device for PCI and platform devices - Use DMA masks from the DMA sample module - I/O: - Implement abstraction for resource regions (struct resource) - Implement resource-based ioremap() abstractions - Provide platform device accessors for I/O (remap) requests - Misc: - Support fallible PinInit types in Revocable - Implement Wrapper for Opaque - Merge pin-init blanket dependencies (for Devres) Misc: - Fix OF node leak in auxiliary_device_create() - Use util macros in device property iterators - Improve kobject sample code - Add device_link_test() for testing device link flags - Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits - Hint to prefer container_of_const() over container_of()" * tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (84 commits) rust: io: fix broken intra-doc links to `platform::Device` rust: io: fix broken intra-doc link to missing `flags` module rust: io: mem: enable IoRequest doc-tests rust: platform: add resource accessors rust: io: mem: add a generic iomem abstraction rust: io: add resource abstraction rust: samples: dma: set DMA mask rust: platform: implement the `dma::Device` trait rust: pci: implement the `dma::Device` trait rust: dma: add DMA addressing capabilities rust: dma: implement `dma::Device` trait rust: net::phy Change module_phy_driver macro to use module_device_table macro rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id rust: device_id: split out index support into a separate trait device: rust: rename Device::as_ref() to Device::from_raw() arm64: cacheinfo: Provide helper to compress MPIDR value into u32 cacheinfo: Add arch hook to compress CPU h/w id into 32 bits for cache-id cacheinfo: Set cache 'id' based on DT data container_of: Document container_of() is not to be used in new code driver core: auxiliary bus: fix OF node leak ...

Merge branches 'pm-misc' and 'pm-tools'

2025-07-22T16:07:11Z

Merge miscellaneous power management updates and cpupower utility updates for 6.17-rc1: - Update contact information in the PM ABI docs and maintainer information in the power domains DT binding (Rafael Wysocki) - Update PM header inclusions to follow the IWYU (Include What You Use) principle (Andy Shevchenko) - Add flags to specify power on attach/detach for PM domains, make the driver core detach PM domains in device_unbind_cleanup(), and drop the dev_pm_domain_detach() call from the platform bus type (Claudiu Beznea) - Improve Python binding's Makefile for cpupower (John B. Wyatt IV) - Fix printing of CORE, CPU fields in cpupower-monitor (Gautham Shenoy) * pm-misc: PM: docs: Use my kernel.org address in ABI docs and DT bindings driver core: platform: Drop dev_pm_domain_detach() call PM: domains: Detach on device_unbind_cleanup() PM: domains: Add flags to specify power on attach/detach PM: Don't use "proxy" headers * pm-tools: cpupower: Improve Python binding's Makefile pm: cpupower: Fix printing of CORE, CPU fields in cpupower-monitor pm: cpupower: Fix the snapshot-order of tsc,mperf, clock in mperf_stop()

Merge branches 'pm-runtime' and 'pm-powercap'

2025-07-22T16:01:15Z

Merge runtime PM updates and power capping updates for 6.17-rc1: - Document return values of suspend-related API functions in the runtime PM framework (Sakari Ailus) - Mark last busy stamp in multiple autosuspend-related functions in the runtime PM framework and update its documentation (Sakari Ailus) - Take active children into account in pm_runtime_get_if_in_use() for consistency (Rafael Wysocki) - Fix NULL pointer dereference in get_pd_power_uw() in the dtpm_cpu power capping driver (Sivan Zohar-Kotzer) - Add support for the Bartlett Lake platform to the Intel RAPL power capping driver (Qiao Wei) - Add PL4 support for Panther Lake to the intel_rapl_msr power capping driver (Zhang Rui) * pm-runtime: PM: runtime: Take active children into account in pm_runtime_get_if_in_use() Documentation: PM: *_autosuspend() functions update last busy time PM: runtime: Mark last busy stamp in pm_request_autosuspend() PM: runtime: Mark last busy stamp in pm_runtime_autosuspend() PM: runtime: Mark last busy stamp in pm_runtime_put_sync_autosuspend() PM: runtime: Mark last busy stamp in pm_runtime_put_autosuspend() PM: runtime: Document return values of suspend-related API functions * pm-powercap: powercap: dtpm_cpu: Fix NULL pointer dereference in get_pd_power_uw() powercap: intel_rapl: Add support for Bartlett Lake platform powercap: intel_rapl_msr: Add PL4 support for Panther Lake