user/sven/linux.git/drivers/base, branch v4.18.14

PM / core: Clear the direct_complete flag on errors

2018-10-13T07:33:13Z

commit 69e445ab8b66a9f30519842ef18be555d3ee9b51 upstream. If __device_suspend() runs asynchronously (in which case the device passed to it is in dpm_suspended_list at that point) and it returns early on an error or pending wakeup, and the power.direct_complete flag has been set for the device already, the subsequent device_resume() will be confused by that and it will call pm_runtime_enable() incorrectly, as runtime PM has not been disabled for the device by __device_suspend(). To avoid that, clear power.direct_complete if __device_suspend() is not going to disable runtime PM for the device before returning. Fixes: aae4518b3124 (PM / sleep: Mechanism to avoid resuming runtime-suspended devices unnecessarily) Reported-by: Al Cooper Tested-by: Al Cooper Reviewed-by: Ulf Hansson Cc: 3.16+ # 3.16+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

firmware: Always initialize the fw_priv list object

2018-10-10T06:56:07Z

commit 7012040576c6ae25a47035659ee48673612c2c27 upstream. When freeing the fw_priv the item is taken off the list. This causes an oops in the FW_OPT_NOCACHE case as the list object is not initialized. Make sure to initialize the list object regardless of this flag. Fixes: 422b3db2a503 ("firmware: Fix security issue with request_firmware_into_buf()") Cc: stable@vger.kernel.org Cc: Rishabh Bhatnagar Signed-off-by: Bjorn Andersson Reviewed-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

firmware: Fix security issue with request_firmware_into_buf()

2018-10-10T06:56:06Z

commit 422b3db2a5036add39a82425b1dd9fb6c96481e8 upstream. When calling request_firmware_into_buf() with the FW_OPT_NOCACHE flag it is expected that firmware is loaded into buffer from memory. But inside alloc_lookup_fw_priv every new firmware that is loaded is added to the firmware cache (fwc) list head. So if any driver requests a firmware that is already loaded the code iterates over the above mentioned list and it can end up giving a pointer to other device driver's firmware buffer. Also the existing copy may either be modified by drivers, remote processors or even freed. This causes a potential security issue with batched requests when using request_firmware_into_buf. Fix alloc_lookup_fw_priv to not add to the fwc head list if FW_OPT_NOCACHE is set, and also don't do the lookup in the list. Fixes: 0e742e9275 ("firmware: provide infrastructure to make fw caching optional") [mcgrof: broken since feature introduction on v4.8] Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Vikram Mulukutla Signed-off-by: Rishabh Bhatnagar Signed-off-by: Luis Chamberlain Signed-off-by: Greg Kroah-Hartman

drivers/base: stop new probing during shutdown

2018-09-26T06:39:28Z

[ Upstream commit 3297c8fc65af5d40501ea7cddff1b195cae57e4e ] There is a race window in device_shutdown(), which may cause -1. parent device shut down before child or -2. no shutdown on a new probing device. For 1st, taking the following scenario: device_shutdown new plugin device list_del_init(parent_dev); spin_unlock(list_lock); device_add(child) probe child shutdown parent_dev --> now child is on the tail of devices_kset For 2nd, taking the following scenario: device_shutdown new plugin device device_add(dev) device_lock(dev); ... device_unlock(dev); probe dev --> now, the new occurred dev has no opportunity to shutdown To fix this race issue, just prevent the new probing request. With this logic, device_shutdown() is more similar to dpm_prepare(). Signed-off-by: Pingfan Liu Reviewed-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

memory_hotplug: fix kernel_panic on offline page processing

2018-09-19T20:41:20Z

commit 4e8346d0be889c7ab5eb2d3deedc18111d741e99 upstream. Within show_valid_zones() the function test_pages_in_a_zone() should be called for online memory blocks only. Otherwise it might lead to the VM_BUG_ON due to uninitialized struct pages (when CONFIG_DEBUG_VM_PGFLAGS kernel option is set): page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p)) ------------[ cut here ]------------ Call Trace: ([<000000000038f91e>] test_pages_in_a_zone+0xe6/0x168) [<0000000000923472>] show_valid_zones+0x5a/0x1a8 [<0000000000900284>] dev_attr_show+0x3c/0x78 [<000000000046f6f0>] sysfs_kf_seq_show+0xd0/0x150 [<00000000003ef662>] seq_read+0x212/0x4b8 [<00000000003bf202>] __vfs_read+0x3a/0x178 [<00000000003bf3ca>] vfs_read+0x8a/0x148 [<00000000003bfa3a>] ksys_read+0x62/0xb8 [<0000000000bc2220>] system_call+0xdc/0x2d8 That VM_BUG_ON was triggered by the page poisoning introduced in mm/sparse.c with the git commit d0dc12e86b31 ("mm/memory_hotplug: optimize memory hotplug"). With the same commit the new 'nid' field has been added to the struct memory_block in order to store and later on derive the node id for offline pages (instead of accessing struct page which might be uninitialized). But one reference to nid in show_valid_zones() function has been overlooked. Fixed with current commit. Also, nr_pages will not be used any more after test_pages_in_a_zone() call, do not update it. Link: http://lkml.kernel.org/r/20180828090539.41491-1-zaslonko@linux.ibm.com Fixes: d0dc12e86b31 ("mm/memory_hotplug: optimize memory hotplug") Signed-off-by: Mikhail Zaslonko Acked-by: Michal Hocko Reviewed-by: Pavel Tatashin Cc: [4.17+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

PM / clk: signedness bug in of_pm_clk_add_clks()

2018-09-05T07:29:55Z

commit 5e2e2f9f76e157063a656351728703cb02b068f1 upstream. "count" needs to be signed for the error handling to work. I made "i" signed as well so they match. Fixes: 02113ba93ea4 (PM / clk: Add support for obtaining clocks from device-tree) Cc: 4.6+ # 4.6+ Signed-off-by: Dan Carpenter Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

x86/speculation/l1tf: Add sysfs reporting for l1tf

2018-08-15T15:37:25Z

commit 17dbca119312b4e8173d4e25ff64262119fcef38 upstream. L1TF core kernel workarounds are cheap and normally always enabled, However they still should be reported in sysfs if the system is vulnerable or mitigated. Add the necessary CPU feature/bug bits. - Extend the existing checks for Meltdowns to determine if the system is vulnerable. All CPUs which are not vulnerable to Meltdown are also not vulnerable to L1TF - Check for 32bit non PAE and emit a warning as there is no practical way for mitigation due to the limited physical address bits - If the system has more than MAX_PA/2 physical memory the invert page workarounds don't protect the system against the L1TF attack anymore, because an inverted physical address will also point to valid memory. Print a warning in this case and report that the system is vulnerable. Add a function which returns the PFN limit for the L1TF mitigation, which will be used in follow up patches for sanity and range checks. [ tglx: Renamed the CPU feature bit to L1TF_PTEINV ] Signed-off-by: Andi Kleen Signed-off-by: Thomas Gleixner Reviewed-by: Josh Poimboeuf Acked-by: Dave Hansen Signed-off-by: Greg Kroah-Hartman

Merge tag 'driver-core-4.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2018-07-26T16:25:03Z

Pull driver core fix from Greg KH: "This is a single driver core fix for 4.18-rc7. It partially reverts a previous commit to resolve some reported issues. It has been in linux-next for a while now with no reported issues" * tag 'driver-core-4.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: driver core: Partially revert "driver core: correct device's shutdown order"

driver core: Partially revert "driver core: correct device's shutdown order"

2018-07-10T15:47:43Z

Commit 52cdbdd49853 (driver core: correct device's shutdown order) introduced a regression by breaking device shutdown on some systems. Namely, the devices_kset_move_last() call in really_probe() added by that commit is a mistake as it may cause parents to follow children in the devices_kset list which then causes shutdown to fail. For example, if a device has children before really_probe() is called for it (which is not uncommon), that call will cause it to be reordered after the children in the devices_kset list and the ordering of that list will not reflect the correct device shutdown order any more. Also it causes the devices_kset list to be constantly reordered until all drivers have been probed which is totally pointless overhead in the majority of cases and it only covered an issue with system shutdown, while system-wide suspend/resume potentially had the same issue on the affected platforms (which was not covered). Moreover, the shutdown issue originally addressed by the change in really_probe() made by commit 52cdbdd49853 is not present in 4.18-rc any more, since dra7 started to use the sdhci-omap driver which doesn't disable any regulators during shutdown, so the really_probe() part of commit 52cdbdd49853 can be safely reverted. [The original issue was related to the omap_hsmmc driver used by dra7 previously.] For the above reasons, revert the really_probe() modifications made by commit 52cdbdd49853. The other code changes made by commit 52cdbdd49853 are useful and they need not be reverted. Fixes: 52cdbdd49853 (driver core: correct device's shutdown order) Link: https://lore.kernel.org/lkml/CAFgQCTt7VfqM=UyCnvNFxrSw8Z6cUtAi3HUwR4_xPAc03SgHjQ@mail.gmail.com/ Reported-by: Pingfan Liu Tested-by: Pingfan Liu Reviewed-by: Kishon Vijay Abraham I Signed-off-by: Rafael J. Wysocki Cc: stable Signed-off-by: Greg Kroah-Hartman

PM / Domains: Don't power on at attach for the multi PM domain case

2018-07-03T14:42:51Z

There are no legacy behavior in drivers to consider while attaching a device to genpd - for the multiple PM domain case. For that reason, let's instead require the driver to runtime resume the device, via calling pm_runtime_get_sync() for example, when it needs to power on the corresponding PM domain. This allows us to improve the situation during attach. Instead of always power on the PM domain, which may be unnecessary, let's leave it in its current state. Additionally, to avoid the PM domain to stay powered on, let's schedule a power off work. Fixes: 3c095f32a92b (PM / Domains: Add support for multi PM domains ...) Signed-off-by: Ulf Hansson Acked-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki