user/sven/linux.git/drivers/base, branch v4.19.204

firmware_loader: fix use-after-free in firmware_fallback_sysfs

2021-08-12T11:19:41Z

commit 75d95e2e39b27f733f21e6668af1c9893a97de5e upstream. This use-after-free happens when a fw_priv object has been freed but hasn't been removed from the pending list (pending_fw_head). The next time fw_load_sysfs_fallback tries to insert into the list, it ends up accessing the pending_list member of the previously freed fw_priv. The root cause here is that all code paths that abort the fw load don't delete it from the pending list. For example: _request_firmware() -> fw_abort_batch_reqs() -> fw_state_aborted() To fix this, delete the fw_priv from the list in __fw_set_state() if the new state is DONE or ABORTED. This way, all aborts will remove the fw_priv from the list. Accordingly, remove calls to list_del_init that were being made before calling fw_state_(aborted|done). Also, in fw_load_sysfs_fallback, don't add the fw_priv to the pending list if it is already aborted. Instead, just jump out and return early. Fixes: bcfbd3523f3c ("firmware: fix a double abort case with fw_load_sysfs_fallback") Cc: stable Reported-by: syzbot+de271708674e2093097b@syzkaller.appspotmail.com Tested-by: syzbot+de271708674e2093097b@syzkaller.appspotmail.com Reviewed-by: Shuah Khan Acked-by: Luis Chamberlain Signed-off-by: Anirudh Rayabharam Link: https://lore.kernel.org/r/20210728085107.4141-3-mail@anirudhrb.com Signed-off-by: Greg Kroah-Hartman

firmware_loader: use -ETIMEDOUT instead of -EAGAIN in fw_load_sysfs_fallback

2021-08-12T11:19:41Z

commit 0d6434e10b5377a006f6dd995c8fc5e2d82acddc upstream. The only motivation for using -EAGAIN in commit 0542ad88fbdd81bb ("firmware loader: Fix _request_firmware_load() return val for fw load abort") was to distinguish the error from -ENOMEM, and so there is no real reason in keeping it. -EAGAIN is typically used to tell the userspace to try something again and in this case re-using the sysfs loading interface cannot be retried when a timeout happens, so the return value is also bogus. -ETIMEDOUT is received when the wait times out and returning that is much more telling of what the reason for the failure was. So, just propagate that instead of returning -EAGAIN. Suggested-by: Luis Chamberlain Reviewed-by: Shuah Khan Acked-by: Luis Chamberlain Signed-off-by: Anirudh Rayabharam Cc: stable Link: https://lore.kernel.org/r/20210728085107.4141-2-mail@anirudhrb.com Signed-off-by: Greg Kroah-Hartman

regmap: set debugfs_name to NULL after it is freed

2021-05-22T08:59:28Z

[ Upstream commit e41a962f82e7afb5b1ee644f48ad0b3aee656268 ] There is a upstream commit cffa4b2122f5("regmap:debugfs: Fix a memory leak when calling regmap_attach_dev") that adds a if condition when create name for debugfs_name. With below function invoking logical, debugfs_name is freed in regmap_debugfs_exit(), but it is not created again because of the if condition introduced by above commit. regmap_reinit_cache() regmap_debugfs_exit() ... regmap_debugfs_init() So, set debugfs_name to NULL after it is freed. Fixes: cffa4b2122f5 ("regmap: debugfs: Fix a memory leak when calling regmap_attach_dev") Signed-off-by: Meng Li Link: https://lore.kernel.org/r/20210226021737.7690-1-Meng.Li@windriver.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

driver core: Fix locking bug in deferred_probe_timeout_work_func()

2021-04-16T09:49:31Z

commit eed6e41813deb9ee622cd9242341f21430d7789f upstream. list_for_each_entry_safe() is only useful if we are deleting nodes in a linked list within the loop. It doesn't protect against other threads adding/deleting nodes to the list in parallel. We need to grab deferred_probe_mutex when traversing the deferred_probe_pending_list. Cc: stable@vger.kernel.org Fixes: 25b4e70dcce9 ("driver core: allow stopping deferred probe after init") Signed-off-by: Saravana Kannan Link: https://lore.kernel.org/r/20210402040342.2944858-2-saravanak@google.com Signed-off-by: Greg Kroah-Hartman

PM: runtime: Fix ordering in pm_runtime_get_suppliers()

2021-04-07T10:48:49Z

commit c0c33442f7203704aef345647e14c2fb86071001 upstream. rpm_active indicates how many times the supplier usage_count has been incremented. Consequently it must be updated after pm_runtime_get_sync() of the supplier, not before. Fixes: 4c06c4e6cf63 ("driver core: Fix possible supplier PM-usage counter imbalance") Signed-off-by: Adrian Hunter Cc: 5.1+ # 5.1+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

PM: runtime: Fix race getting/putting suppliers at probe

2021-04-07T10:48:49Z

commit 9dfacc54a8661bc8be6e08cffee59596ec59f263 upstream. pm_runtime_put_suppliers() must not decrement rpm_active unless the consumer is suspended. That is because, otherwise, it could suspend suppliers for an active consumer. That can happen as follows: static int driver_probe_device(struct device_driver *drv, struct device *dev) { int ret = 0; if (!device_is_registered(dev)) return -ENODEV; dev->can_match = true; pr_debug("bus: '%s': %s: matched device %s with driver %s\n", drv->bus->name, __func__, dev_name(dev), drv->name); pm_runtime_get_suppliers(dev); if (dev->parent) pm_runtime_get_sync(dev->parent); At this point, dev can runtime suspend so rpm_put_suppliers() can run, rpm_active becomes 1 (the lowest value). pm_runtime_barrier(dev); if (initcall_debug) ret = really_probe_debug(dev, drv); else ret = really_probe(dev, drv); Probe callback can have runtime resumed dev, and then runtime put so dev is awaiting autosuspend, but rpm_active is 2. pm_request_idle(dev); if (dev->parent) pm_runtime_put(dev->parent); pm_runtime_put_suppliers(dev); Now pm_runtime_put_suppliers() will put the supplier i.e. rpm_active 2 -> 1, but consumer can still be active. return ret; } Fix by checking the runtime status. For any status other than RPM_SUSPENDED, rpm_active can be considered to be "owned" by rpm_[get/put]_suppliers() and pm_runtime_put_suppliers() need do nothing. Reported-by: Asutosh Das Fixes: 4c06c4e6cf63 ("driver core: Fix possible supplier PM-usage counter imbalance") Signed-off-by: Adrian Hunter Cc: 5.1+ # 5.1+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

Revert "PM: runtime: Update device status before letting suppliers suspend"

2021-03-24T10:07:31Z

commit 0cab893f409c53634d0d818fa414641cbcdb0dab upstream. Revert commit 44cc89f76464 ("PM: runtime: Update device status before letting suppliers suspend") that introduced a race condition into __rpm_callback() which allowed a concurrent rpm_resume() to run and resume the device prematurely after its status had been changed to RPM_SUSPENDED by __rpm_callback(). Fixes: 44cc89f76464 ("PM: runtime: Update device status before letting suppliers suspend") Link: https://lore.kernel.org/linux-pm/24dfb6fc-5d54-6ee2-9195-26428b7ecf8a@intel.com/ Reported-by: Adrian Hunter Cc: 4.10+ # 4.10+ Signed-off-by: Rafael J. Wysocki Reviewed-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

PM: runtime: Update device status before letting suppliers suspend

2021-03-11T13:04:59Z

commit 44cc89f764646b2f1f2ea5d1a08b230131707851 upstream. Because the PM-runtime status of the device is not updated in __rpm_callback(), attempts to suspend the suppliers of the given device triggered by rpm_put_suppliers() called by it may fail. Fix this by making __rpm_callback() update the device's status to RPM_SUSPENDED before calling rpm_put_suppliers() if the current status of the device is RPM_SUSPENDING and the callback just invoked by it has returned 0 (success). While at it, modify the code in __rpm_callback() to always check the device's PM-runtime status under its PM lock. Link: https://lore.kernel.org/linux-pm/CAPDyKFqm06KDw_p8WXsM4dijDbho4bb6T4k50UqqvR1_COsp8g@mail.gmail.com/ Fixes: 21d5c57b3726 ("PM / runtime: Use device links") Reported-by: Elaine Zhang Diagnosed-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki Tested-by: Elaine Zhang Reviewed-by: Ulf Hansson Cc: 4.10+ # 4.10+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

regmap: sdw: use _no_pm functions in regmap_read/write

2021-03-04T08:39:48Z

[ Upstream commit d288a5712ef961e16d588bbdb2d846e00b5ef154 ] sdw_update_slave_status will be invoked when a codec is attached, and the codec driver will initialize the codec with regmap functions while the codec device is pm_runtime suspended. regmap routines currently rely on regular SoundWire IO functions, which will call pm_runtime_get_sync()/put_autosuspend. This causes a deadlock where the resume routine waits for an initialization complete signal that while the initialization complete can only be reached when the resume completes. The only solution if we allow regmap functions to be used in resume operations as well as during codec initialization is to use _no_pm routines. The duty of making sure the bus is operational needs to be handled above the regmap level. Fixes: 7c22ce6e21840 ('regmap: Add SoundWire bus support') Signed-off-by: Bard Liao Acked-by: Mark Brown Link: https://lore.kernel.org/r/20210122070634.12825-6-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

driver core: Extend device_is_dependent()

2021-01-27T10:05:42Z

commit 3d1cf435e201d1fd63e4346b141881aed086effd upstream. If the device passed as the target (second argument) to device_is_dependent() is not completely registered (that is, it has been initialized, but not added yet), but the parent pointer of it is set, it may be missing from the list of the parent's children and device_for_each_child() called by device_is_dependent() cannot be relied on to catch that dependency. For this reason, modify device_is_dependent() to check the ancestors of the target device by following its parent pointer in addition to the device_for_each_child() walk. Fixes: 9ed9895370ae ("driver core: Functional dependencies tracking support") Reported-by: Stephan Gerhold Tested-by: Stephan Gerhold Reviewed-by: Saravana Kannan Signed-off-by: Rafael J. Wysocki Link: https://lore.kernel.org/r/17705994.d592GUb2YH@kreacher Cc: stable Signed-off-by: Greg Kroah-Hartman