user/sven/linux.git/drivers/base, branch v4.19.54

PM / core: Propagate dev->power.wakeup_path when no callbacks

2019-05-31T13:46:23Z

[ Upstream commit dc351d4c5f4fe4d0f274d6d660227be0c3a03317 ] The dev->power.direct_complete flag may become set in device_prepare() in case the device don't have any PM callbacks (dev->power.no_pm_callbacks is set). This leads to a broken behaviour, when there is child having wakeup enabled and relies on its parent to be used in the wakeup path. More precisely, when the direct complete path becomes selected for the child in __device_suspend(), the propagation of the dev->power.wakeup_path becomes skipped as well. Let's address this problem, by checking if the device is a part the wakeup path or has wakeup enabled, then prevent the direct complete path from being used. Reported-by: Loic Pallardy Signed-off-by: Ulf Hansson [ rjw: Comment cleanup ] Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

driver core: Postpone DMA tear-down until after devres release for probe failure

2019-05-25T16:23:47Z

commit 0b777eee88d712256ba8232a9429edb17c4f9ceb upstream. In commit 376991db4b64 ("driver core: Postpone DMA tear-down until after devres release"), we changed the ordering of tearing down the device DMA ops and releasing all the device's resources; this was because the DMA ops should be maintained until we release the device's managed DMA memories. However, we have seen another crash on an arm64 system when a device driver probe fails: hisi_sas_v3_hw 0000:74:02.0: Adding to iommu group 2 scsi host1: hisi_sas_v3_hw BUG: Bad page state in process swapper/0 pfn:313f5 page:ffff7e0000c4fd40 count:1 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0xfffe00000001000(reserved) raw: 0fffe00000001000 ffff7e0000c4fd48 ffff7e0000c4fd48 0000000000000000 raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set bad because of flags: 0x1000(reserved) Modules linked in: CPU: 49 PID: 1 Comm: swapper/0 Not tainted 5.1.0-rc1-43081-g22d97fd-dirty #1433 Hardware name: Huawei D06/D06, BIOS Hisilicon D06 UEFI RC0 - V1.12.01 01/29/2019 Call trace: dump_backtrace+0x0/0x118 show_stack+0x14/0x1c dump_stack+0xa4/0xc8 bad_page+0xe4/0x13c free_pages_check_bad+0x4c/0xc0 __free_pages_ok+0x30c/0x340 __free_pages+0x30/0x44 __dma_direct_free_pages+0x30/0x38 dma_direct_free+0x24/0x38 dma_free_attrs+0x9c/0xd8 dmam_release+0x20/0x28 release_nodes+0x17c/0x220 devres_release_all+0x34/0x54 really_probe+0xc4/0x2c8 driver_probe_device+0x58/0xfc device_driver_attach+0x68/0x70 __driver_attach+0x94/0xdc bus_for_each_dev+0x5c/0xb4 driver_attach+0x20/0x28 bus_add_driver+0x14c/0x200 driver_register+0x6c/0x124 __pci_register_driver+0x48/0x50 sas_v3_pci_driver_init+0x20/0x28 do_one_initcall+0x40/0x25c kernel_init_freeable+0x2b8/0x3c0 kernel_init+0x10/0x100 ret_from_fork+0x10/0x18 Disabling lock debugging due to kernel taint BUG: Bad page state in process swapper/0 pfn:313f6 page:ffff7e0000c4fd80 count:1 mapcount:0 mapping:0000000000000000 index:0x0 [ 89.322983] flags: 0xfffe00000001000(reserved) raw: 0fffe00000001000 ffff7e0000c4fd88 ffff7e0000c4fd88 0000000000000000 raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 The crash occurs for the same reason. In this case, on the really_probe() failure path, we are still clearing the DMA ops prior to releasing the device's managed memories. This patch fixes this issue by reordering the DMA ops teardown and the call to devres_release_all() on the failure path. Reported-by: Xiang Chen Tested-by: Xiang Chen Signed-off-by: John Garry Reviewed-by: Robin Murphy [jpg: backport to 4.19.x and earlier] Signed-off-by: John Garry Signed-off-by: Greg Kroah-Hartman

x86/speculation/mds: Add sysfs reporting for MDS

2019-05-14T17:17:56Z

commit 8a4b06d391b0a42a373808979b5028f5c84d9c6a upstream Add the sysfs reporting file for MDS. It exposes the vulnerability and mitigation state similar to the existing files for the other speculative hardware vulnerabilities. Signed-off-by: Thomas Gleixner Reviewed-by: Greg Kroah-Hartman Reviewed-by: Borislav Petkov Reviewed-by: Jon Masters Tested-by: Jon Masters Signed-off-by: Greg Kroah-Hartman

mm: hide incomplete nr_indirectly_reclaimable in sysfs

2019-04-20T07:16:05Z

In upstream branch this fixed by commit b29940c1abd7 ("mm: rename and change semantics of nr_indirectly_reclaimable_bytes"). This fixes /sys/devices/system/node/node*/vmstat format: ... nr_dirtied 6613155 nr_written 5796802 11089216 ... Cc: # 4.19.y Fixes: 7aaf77272358 ("mm: don't show nr_indirectly_reclaimable in /proc/vmstat") Signed-off-by: Konstantin Khlebnikov Cc: Roman Gushchin Cc: Vlastimil Babka Signed-off-by: Greg Kroah-Hartman

PM / Domains: Avoid a potential deadlock

2019-04-20T07:15:58Z

[ Upstream commit 2071ac985d37efe496782c34318dbead93beb02f ] Lockdep warns that prepare_lock and genpd->mlock can cause a deadlock the deadlock scenario is like following: First thread is probing cs2000 cs2000_probe() clk_register() __clk_core_init() clk_prepare_lock() ----> acquires prepare_lock cs2000_recalc_rate() i2c_smbus_read_byte_data() rcar_i2c_master_xfer() dma_request_chan() rcar_dmac_of_xlate() rcar_dmac_alloc_chan_resources() pm_runtime_get_sync() __pm_runtime_resume() rpm_resume() rpm_callback() genpd_runtime_resume() ----> acquires genpd->mlock Second thread is attaching any device to the same PM domain genpd_add_device() genpd_lock() ----> acquires genpd->mlock cpg_mssr_attach_dev() of_clk_get_from_provider() __of_clk_get_from_provider() __clk_create_clk() clk_prepare_lock() ----> acquires prepare_lock Since currently no PM provider access genpd's critical section in .attach_dev, and .detach_dev callbacks, so there is no need to protect these two callbacks with genpd->mlock. This patch avoids a potential deadlock by moving out .attach_dev and .detach_dev from genpd->mlock, so that genpd->mlock won't be held when prepare_lock is acquired in .attach_dev and .detach_dev Signed-off-by: Jiada Wang Reviewed-by: Ulf Hansson Tested-by: Geert Uytterhoeven Reviewed-by: Geert Uytterhoeven Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

PM / wakeup: Rework wakeup source timer cancellation

2019-03-23T19:10:10Z

commit 1fad17fb1bbcd73159c2b992668a6957ecc5af8a upstream. If wakeup_source_add() is called right after wakeup_source_remove() for the same wakeup source, timer_setup() may be called for a potentially scheduled timer which is incorrect. To avoid that, move the wakeup source timer cancellation from wakeup_source_drop() to wakeup_source_remove(). Moreover, make wakeup_source_remove() clear the timer function after canceling the timer to let wakeup_source_not_registered() treat unregistered wakeup sources in the same way as the ones that have never been registered. Signed-off-by: Viresh Kumar Cc: 4.4+ # 4.4+ [ rjw: Subject, changelog, merged two patches together ] Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

driver core: Postpone DMA tear-down until after devres release

2019-03-13T21:02:41Z

commit 376991db4b6464e906d699ef07681e2ffa8ab08c upstream. When unbinding the (IOMMU-enabled) R-Car SATA device on Salvator-XS (R-Car H3 ES2.0), in preparation of rebinding against vfio-platform for device pass-through for virtualization: echo ee300000.sata > /sys/bus/platform/drivers/sata_rcar/unbind the kernel crashes with: Unable to handle kernel paging request at virtual address ffffffbf029ffffc Mem abort info: ESR = 0x96000006 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 swapper pgtable: 4k pages, 39-bit VAs, pgdp = 000000007e8c586c [ffffffbf029ffffc] pgd=000000073bfc6003, pud=000000073bfc6003, pmd=0000000000000000 Internal error: Oops: 96000006 [#1] SMP Modules linked in: CPU: 0 PID: 1098 Comm: bash Not tainted 5.0.0-rc5-salvator-x-00452-g37596f884f4318ef #287 Hardware name: Renesas Salvator-X 2nd version board based on r8a7795 ES2.0+ (DT) pstate: 60400005 (nZCv daif +PAN -UAO) pc : __free_pages+0x8/0x58 lr : __dma_direct_free_pages+0x50/0x5c sp : ffffff801268baa0 x29: ffffff801268baa0 x28: 0000000000000000 x27: ffffffc6f9c60bf0 x26: ffffffc6f9c60bf0 x25: ffffffc6f9c60810 x24: 0000000000000000 x23: 00000000fffff000 x22: ffffff8012145000 x21: 0000000000000800 x20: ffffffbf029fffc8 x19: 0000000000000000 x18: ffffffc6f86c42c8 x17: 0000000000000000 x16: 0000000000000070 x15: 0000000000000003 x14: 0000000000000000 x13: ffffff801103d7f8 x12: 0000000000000028 x11: ffffff8011117604 x10: 0000000000009ad8 x9 : ffffff80110126d0 x8 : ffffffc6f7563000 x7 : 6b6b6b6b6b6b6b6b x6 : 0000000000000018 x5 : ffffff8011cf3cc8 x4 : 0000000000004000 x3 : 0000000000080000 x2 : 0000000000000001 x1 : 0000000000000000 x0 : ffffffbf029fffc8 Process bash (pid: 1098, stack limit = 0x00000000c38e3e32) Call trace: __free_pages+0x8/0x58 __dma_direct_free_pages+0x50/0x5c arch_dma_free+0x1c/0x98 dma_direct_free+0x14/0x24 dma_free_attrs+0x9c/0xdc dmam_release+0x18/0x20 release_nodes+0x25c/0x28c devres_release_all+0x48/0x4c device_release_driver_internal+0x184/0x1f0 device_release_driver+0x14/0x1c unbind_store+0x70/0xb8 drv_attr_store+0x24/0x34 sysfs_kf_write+0x4c/0x64 kernfs_fop_write+0x154/0x1c4 __vfs_write+0x34/0x164 vfs_write+0xb4/0x16c ksys_write+0x5c/0xbc __arm64_sys_write+0x14/0x1c el0_svc_common+0x98/0x114 el0_svc_handler+0x1c/0x24 el0_svc+0x8/0xc Code: d51b4234 17fffffa a9bf7bfd 910003fd (b9403404) ---[ end trace 8c564cdd3a1a840f ]--- While I've bisected this to commit e8e683ae9a736407 ("iommu/of: Fix probe-deferral"), and reverting that commit on post-v5.0-rc4 kernels does fix the problem, this turned out to be a red herring. On arm64, arch_teardown_dma_ops() resets dev->dma_ops to NULL. Hence if a driver has used a managed DMA allocation API, the allocated DMA memory will be freed using the direct DMA ops, while it may have been allocated using a custom DMA ops (iommu_dma_ops in this case). Fix this by reversing the order of the calls to devres_release_all() and arch_teardown_dma_ops(). Signed-off-by: Geert Uytterhoeven Acked-by: Christoph Hellwig Reviewed-by: Rafael J. Wysocki Cc: stable Reviewed-by: Robin Murphy [rm: backport for 4.12-4.19 - kernels before 5.0 will not see the crash above, but may get silent memory corruption instead] Signed-off-by: Robin Murphy Signed-off-by: Greg Kroah-Hartman

cacheinfo: Keep the old value if of_property_read_u32 fails

2019-02-12T18:47:26Z

commit 3a34c986324c07dde32903f7bb262e6138e77c2a upstream. Commit 448a5a552f336bd7b847b1951 ("drivers: base: cacheinfo: use OF property_read_u32 instead of get_property,read_number") makes cache size and number_of_sets be 0 if DT doesn't provide there values. I think this is unreasonable so make them keep the old values, which is the same as old kernels. Fixes: 448a5a552f33 ("drivers: base: cacheinfo: use OF property_read_u32 instead of get_property,read_number") Cc: stable@vger.kernel.org Signed-off-by: Huacai Chen Reviewed-by: Sudeep Holla Signed-off-by: Greg Kroah-Hartman

kobject: return error code if writing /sys/.../uevent fails

2019-02-12T18:47:06Z

[ Upstream commit df44b479654f62b478c18ee4d8bc4e9f897a9844 ] Propagate error code back to userspace if writing the /sys/.../uevent file fails. Before, the write operation always returned with success, even if we failed to recognize the input string or if we failed to generate the uevent itself. With the error codes properly propagated back to userspace, we are able to react in userspace accordingly by not assuming and awaiting a uevent that is not delivered. Signed-off-by: Peter Rajnoha Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

driver core: Move async_synchronize_full call

2019-02-12T18:47:06Z

[ Upstream commit c37d721c68ad88925ba0e72f6e14acb829a8c6bb ] Move the async_synchronize_full call out of __device_release_driver and into driver_detach. The idea behind this is that the async_synchronize_full call will only guarantee that any existing async operations are flushed. This doesn't do anything to guarantee that a hotplug event that may occur while we are doing the release of the driver will not be asynchronously scheduled. By moving this into the driver_detach path we can avoid potential deadlocks as we aren't holding the device lock at this point and we should not have the driver we want to flush loaded so the flush will take care of any asynchronous events the driver we are detaching might have scheduled. Fixes: 765230b5f084 ("driver-core: add asynchronous probing support for drivers") Reviewed-by: Bart Van Assche Reviewed-by: Dan Williams Signed-off-by: Alexander Duyck Reviewed-by: Luis Chamberlain Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin