user/sven/linux.git/drivers/base, branch v4.4.123

drivers: base: cacheinfo: fix boot error message when acpi is enabled

2018-01-31T11:06:08Z

commit 55877ef45fbd7f975d078426866b7d1a2435dcc3 upstream. ARM64 enables both CONFIG_OF and CONFIG_ACPI and the firmware can pass both ACPI tables and the device tree. Based on the kernel parameter, one of the two will be chosen. If acpi is enabled, then device tree is not unflattened. Currently ARM64 platforms report: " Failed to find cpu0 device node Unable to detect cache hierarchy from DT for CPU 0 " which is incorrect when booting with ACPI. Also latest ACPI v6.1 has no support for cache properties/hierarchy. This patch adds check for unflattened device tree and also returns as "not supported" if ACPI is runtime enabled. It also removes the reference to DT from the error message as the cache hierarchy can be detected from the firmware(OF/DT/ACPI) Cc: Greg Kroah-Hartman Signed-off-by: Sudeep Holla Signed-off-by: Mian Yousaf Kaukab Signed-off-by: Greg Kroah-Hartman

drivers: base: cacheinfo: fix x86 with CONFIG_OF enabled

2018-01-31T11:06:08Z

commit fac51482577d5e05bbb0efa8d602a3c2111098bf upstream. With CONFIG_OF enabled on x86, we get the following error on boot: " Failed to find cpu0 device node Unable to detect cache hierarchy from DT for CPU 0 " and the cacheinfo fails to get populated in the corresponding sysfs entries. This is because cache_setup_of_node looks for of_node for setting up the shared cpu_map without checking that it's already populated in the architecture specific callback. In order to indicate that the shared cpu_map is already populated, this patch introduces a boolean `cpu_map_populated` in struct cpu_cacheinfo that can be used by the generic code to skip cache_shared_cpu_map_setup. This patch also sets that boolean for x86. Cc: Greg Kroah-Hartman Signed-off-by: Sudeep Holla Signed-off-by: Mian Yousaf Kaukab Signed-off-by: Greg Kroah-Hartman

PM / sleep: declare __tracedata symbols as char[] rather than char

2018-01-31T11:06:08Z

commit f97238373b8662a6d580e204df2e7bcbfa43e27a upstream. Accessing more than one byte from a symbol declared simply 'char' is undefined behavior, as reported by UBSAN: UBSAN: Undefined behaviour in drivers/base/power/trace.c:178:18 load of address ffffffff8203fc78 with insufficient space for an object of type 'char' Avoid this by declaring the symbols as arrays. Signed-off-by: Eric Biggers Signed-off-by: Rafael J. Wysocki Signed-off-by: Jiri Slaby Signed-off-by: Greg Kroah-Hartman

sysfs/cpu: Add vulnerability folder

2018-01-17T08:35:33Z

commit 87590ce6e373d1a5401f6539f0c59ef92dd924a9 upstream. As the meltdown/spectre problem affects several CPU architectures, it makes sense to have common way to express whether a system is affected by a particular vulnerability or not. If affected the way to express the mitigation should be common as well. Create /sys/devices/system/cpu/vulnerabilities folder and files for meltdown, spectre_v1 and spectre_v2. Allow architectures to override the show function. Signed-off-by: Thomas Gleixner Reviewed-by: Greg Kroah-Hartman Reviewed-by: Konrad Rzeszutek Wilk Cc: Peter Zijlstra Cc: Will Deacon Cc: Dave Hansen Cc: Linus Torvalds Cc: Borislav Petkov Cc: David Woodhouse Link: https://lkml.kernel.org/r/20180107214913.096657732@linutronix.de Signed-off-by: Greg Kroah-Hartman

isa: Prevent NULL dereference in isa_bus driver callbacks

2017-12-16T09:33:48Z

commit 5a244727f428a06634f22bb890e78024ab0c89f3 upstream. The isa_driver structure for an isa_bus device is stored in the device platform_data member of the respective device structure. This platform_data member may be reset to NULL if isa_driver match callback for the device fails, indicating a device unsupported by the ISA driver. This patch fixes a possible NULL pointer dereference if one of the isa_driver callbacks to attempted for an unsupported device. This error should not occur in practice since ISA devices are typically manually configured and loaded by the users, but we may as well prevent this error from popping up for the 0day testers. Fixes: a5117ba7da37 ("[PATCH] Driver model: add ISA bus") Signed-off-by: William Breathitt Gray Acked-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

PM / OPP: Add missing of_node_put(np)

2017-11-30T08:37:25Z

commit 7978db344719dab1e56d05e6fc04aaaddcde0a5e upstream. The for_each_available_child_of_node() loop in _of_add_opp_table_v2() doesn't drop the reference to "np" on errors. Fix that. Fixes: 274659029c9d (PM / OPP: Add support to parse "operating-points-v2" bindings) Signed-off-by: Tobias Jordan [ VK: Improved commit log. ] Signed-off-by: Viresh Kumar Reviewed-by: Stephen Boyd Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

PM / wakeirq: report a wakeup_event on dedicated wekup irq

2017-11-08T09:06:28Z

[ Upstream commit 09bb6e93956ae5175b96905b723ec879c3ca0765 ] There are two reasons for reporting wakeup event when dedicated wakeup IRQ is triggered: - wakeup events accounting, so proper statistical data will be displayed in sysfs and debugfs; - there are small window when System is entering suspend during which dedicated wakeup IRQ can be lost: dpm_suspend_noirq() |- device_wakeup_arm_wake_irqs() |- dev_pm_arm_wake_irq(X) |- IRQ is enabled and marked as wakeup source [1]... |- suspend_device_irqs() |- suspend_device_irq(X) |- irqd_set(X, IRQD_WAKEUP_ARMED); |- wakup IRQ armed The wakeup IRQ can be lost if it's triggered at point [1] and not armed yet. Hence, fix above cases by adding simple pm_wakeup_event() call in handle_threaded_wake_irq(). Fixes: 4990d4fe327b (PM / Wakeirq: Add automated device wake IRQ handling) Signed-off-by: Grygorii Strashko Tested-by: Keerthy [ tony@atomide.com: added missing return to avoid warnings ] Tested-by: Tony Lindgren Signed-off-by: Tony Lindgren Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

driver core: platform: Don't read past the end of "driver_override" buffer

2017-10-12T09:27:32Z

commit bf563b01c2895a4bfd1a29cc5abc67fe706ecffd upstream. When printing the driver_override parameter when it is 4095 and 4094 bytes long, the printing code would access invalid memory because we need count+1 bytes for printing. Reject driver_override values of these lengths in driver_override_store(). This is in close analogy to commit 4efe874aace5 ("PCI: Don't read past the end of sysfs "driver_override" buffer") from Sasha Levin. Fixes: 3d713e0e382e ("driver core: platform: add device binding path 'driver_override'") Signed-off-by: Nicolai Stange Signed-off-by: Greg Kroah-Hartman

driver core: bus: Fix a potential double free

2017-09-13T21:09:44Z

commit 0f9b011d3321ca1079c7a46c18cb1956fbdb7bcb upstream. The .release function of driver_ktype is 'driver_release()'. This function frees the container_of this kobject. So, this memory must not be freed explicitly in the error handling path of 'bus_add_driver()'. Otherwise a double free will occur. Signed-off-by: Christophe JAILLET Signed-off-by: Greg Kroah-Hartman

PM / Domains: defer dev_pm_domain_set() until genpd->attach_dev succeeds if present

2017-08-07T02:19:42Z

commit 975e83cfb8dc16e7a2fdc58188c77c0c605876c2 upstream. If the genpd->attach_dev or genpd->power_on fails, genpd_dev_pm_attach may return -EPROBE_DEFER initially. However genpd_alloc_dev_data sets the PM domain for the device unconditionally. When subsequent attempts are made to call genpd_dev_pm_attach, it may return -EEXISTS checking dev->pm_domain without re-attempting to call attach_dev or power_on. platform_drv_probe then attempts to call drv->probe as the return value -EEXIST != -EPROBE_DEFER, which may end up in a situation where the device is accessed without it's power domain switched on. Fixes: f104e1e5ef57 (PM / Domains: Re-order initialization of generic_pm_domain_data) Signed-off-by: Sudeep Holla Acked-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman