user/sven/linux.git/drivers/base, branch v4.4.146

driver core: Partially revert "driver core: correct device's shutdown order"

2018-07-28T05:45:03Z

commit 722e5f2b1eec7de61117b7c0a7914761e3da2eda upstream. Commit 52cdbdd49853 (driver core: correct device's shutdown order) introduced a regression by breaking device shutdown on some systems. Namely, the devices_kset_move_last() call in really_probe() added by that commit is a mistake as it may cause parents to follow children in the devices_kset list which then causes shutdown to fail. For example, if a device has children before really_probe() is called for it (which is not uncommon), that call will cause it to be reordered after the children in the devices_kset list and the ordering of that list will not reflect the correct device shutdown order any more. Also it causes the devices_kset list to be constantly reordered until all drivers have been probed which is totally pointless overhead in the majority of cases and it only covered an issue with system shutdown, while system-wide suspend/resume potentially had the same issue on the affected platforms (which was not covered). Moreover, the shutdown issue originally addressed by the change in really_probe() made by commit 52cdbdd49853 is not present in 4.18-rc any more, since dra7 started to use the sdhci-omap driver which doesn't disable any regulators during shutdown, so the really_probe() part of commit 52cdbdd49853 can be safely reverted. [The original issue was related to the omap_hsmmc driver used by dra7 previously.] For the above reasons, revert the really_probe() modifications made by commit 52cdbdd49853. The other code changes made by commit 52cdbdd49853 are useful and they need not be reverted. Fixes: 52cdbdd49853 (driver core: correct device's shutdown order) Link: https://lore.kernel.org/lkml/CAFgQCTt7VfqM=UyCnvNFxrSw8Z6cUtAi3HUwR4_xPAc03SgHjQ@mail.gmail.com/ Reported-by: Pingfan Liu Tested-by: Pingfan Liu Reviewed-by: Kishon Vijay Abraham I Signed-off-by: Rafael J. Wysocki Cc: stable Signed-off-by: Greg Kroah-Hartman

x86/bugs: Expose /sys/../spec_store_bypass

2018-07-25T08:18:24Z

commit c456442cd3a59eeb1d60293c26cbe2ff2c4e42cf upstream Add the sysfs file for the new vulerability. It does not do much except show the words 'Vulnerable' for recent x86 cores. Intel cores prior to family 6 are known not to be vulnerable, and so are some Atoms and some Xeon Phi. It assumes that older Cyrix, Centaur, etc. cores are immune. Signed-off-by: Konrad Rzeszutek Wilk Signed-off-by: Thomas Gleixner Reviewed-by: Borislav Petkov Reviewed-by: Ingo Molnar Signed-off-by: David Woodhouse Signed-off-by: Greg Kroah-Hartman Signed-off-by: Srivatsa S. Bhat Reviewed-by: Matt Helsley (VMware) Reviewed-by: Alexey Makhalov Reviewed-by: Bo Gan Signed-off-by: Greg Kroah-Hartman

driver core: Don't ignore class_dir_create_and_add() failure.

2018-07-03T09:21:25Z

commit 84d0c27d6233a9ba0578b20f5a09701eb66cee42 upstream. syzbot is hitting WARN() at kernfs_add_one() [1]. This is because kernfs_create_link() is confused by previous device_add() call which continued without setting dev->kobj.parent field when get_device_parent() failed by memory allocation fault injection. Fix this by propagating the error from class_dir_create_and_add() to the calllers of get_device_parent(). [1] https://syzkaller.appspot.com/bug?id=fae0fb607989ea744526d1c082a5b8de6529116f Signed-off-by: Tetsuo Handa Reported-by: syzbot Cc: Greg Kroah-Hartman Cc: stable Signed-off-by: Greg Kroah-Hartman

regmap: Fix reversed bounds check in regmap_raw_write()

2018-04-24T07:32:06Z

commit f00e71091ab92eba52122332586c6ecaa9cd1a56 upstream. We're supposed to be checking that "val_len" is not too large but instead we check if it is smaller than the max. The only function affected would be regmap_i2c_smbus_i2c_write() in drivers/base/regmap/regmap-i2c.c. Strangely that function has its own limit check which returns an error if (count >= I2C_SMBUS_BLOCK_MAX) so it doesn't look like it has ever been able to do anything except return an error. Fixes: c335931ed9d2 ("regmap: Add raw_write/read checks for max_raw_write/read sizes") Signed-off-by: Dan Carpenter Signed-off-by: Mark Brown Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

drivers: base: cacheinfo: fix boot error message when acpi is enabled

2018-01-31T11:06:08Z

commit 55877ef45fbd7f975d078426866b7d1a2435dcc3 upstream. ARM64 enables both CONFIG_OF and CONFIG_ACPI and the firmware can pass both ACPI tables and the device tree. Based on the kernel parameter, one of the two will be chosen. If acpi is enabled, then device tree is not unflattened. Currently ARM64 platforms report: " Failed to find cpu0 device node Unable to detect cache hierarchy from DT for CPU 0 " which is incorrect when booting with ACPI. Also latest ACPI v6.1 has no support for cache properties/hierarchy. This patch adds check for unflattened device tree and also returns as "not supported" if ACPI is runtime enabled. It also removes the reference to DT from the error message as the cache hierarchy can be detected from the firmware(OF/DT/ACPI) Cc: Greg Kroah-Hartman Signed-off-by: Sudeep Holla Signed-off-by: Mian Yousaf Kaukab Signed-off-by: Greg Kroah-Hartman

drivers: base: cacheinfo: fix x86 with CONFIG_OF enabled

2018-01-31T11:06:08Z

commit fac51482577d5e05bbb0efa8d602a3c2111098bf upstream. With CONFIG_OF enabled on x86, we get the following error on boot: " Failed to find cpu0 device node Unable to detect cache hierarchy from DT for CPU 0 " and the cacheinfo fails to get populated in the corresponding sysfs entries. This is because cache_setup_of_node looks for of_node for setting up the shared cpu_map without checking that it's already populated in the architecture specific callback. In order to indicate that the shared cpu_map is already populated, this patch introduces a boolean `cpu_map_populated` in struct cpu_cacheinfo that can be used by the generic code to skip cache_shared_cpu_map_setup. This patch also sets that boolean for x86. Cc: Greg Kroah-Hartman Signed-off-by: Sudeep Holla Signed-off-by: Mian Yousaf Kaukab Signed-off-by: Greg Kroah-Hartman

PM / sleep: declare __tracedata symbols as char[] rather than char

2018-01-31T11:06:08Z

commit f97238373b8662a6d580e204df2e7bcbfa43e27a upstream. Accessing more than one byte from a symbol declared simply 'char' is undefined behavior, as reported by UBSAN: UBSAN: Undefined behaviour in drivers/base/power/trace.c:178:18 load of address ffffffff8203fc78 with insufficient space for an object of type 'char' Avoid this by declaring the symbols as arrays. Signed-off-by: Eric Biggers Signed-off-by: Rafael J. Wysocki Signed-off-by: Jiri Slaby Signed-off-by: Greg Kroah-Hartman

sysfs/cpu: Add vulnerability folder

2018-01-17T08:35:33Z

commit 87590ce6e373d1a5401f6539f0c59ef92dd924a9 upstream. As the meltdown/spectre problem affects several CPU architectures, it makes sense to have common way to express whether a system is affected by a particular vulnerability or not. If affected the way to express the mitigation should be common as well. Create /sys/devices/system/cpu/vulnerabilities folder and files for meltdown, spectre_v1 and spectre_v2. Allow architectures to override the show function. Signed-off-by: Thomas Gleixner Reviewed-by: Greg Kroah-Hartman Reviewed-by: Konrad Rzeszutek Wilk Cc: Peter Zijlstra Cc: Will Deacon Cc: Dave Hansen Cc: Linus Torvalds Cc: Borislav Petkov Cc: David Woodhouse Link: https://lkml.kernel.org/r/20180107214913.096657732@linutronix.de Signed-off-by: Greg Kroah-Hartman

isa: Prevent NULL dereference in isa_bus driver callbacks

2017-12-16T09:33:48Z

commit 5a244727f428a06634f22bb890e78024ab0c89f3 upstream. The isa_driver structure for an isa_bus device is stored in the device platform_data member of the respective device structure. This platform_data member may be reset to NULL if isa_driver match callback for the device fails, indicating a device unsupported by the ISA driver. This patch fixes a possible NULL pointer dereference if one of the isa_driver callbacks to attempted for an unsupported device. This error should not occur in practice since ISA devices are typically manually configured and loaded by the users, but we may as well prevent this error from popping up for the 0day testers. Fixes: a5117ba7da37 ("[PATCH] Driver model: add ISA bus") Signed-off-by: William Breathitt Gray Acked-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

PM / OPP: Add missing of_node_put(np)

2017-11-30T08:37:25Z

commit 7978db344719dab1e56d05e6fc04aaaddcde0a5e upstream. The for_each_available_child_of_node() loop in _of_add_opp_table_v2() doesn't drop the reference to "np" on errors. Fix that. Fixes: 274659029c9d (PM / OPP: Add support to parse "operating-points-v2" bindings) Signed-off-by: Tobias Jordan [ VK: Improved commit log. ] Signed-off-by: Viresh Kumar Reviewed-by: Stephen Boyd Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman