user/sven/linux.git/drivers/base, branch v5.4.111

PM: runtime: Fix ordering in pm_runtime_get_suppliers()

2021-04-07T12:47:42Z

commit c0c33442f7203704aef345647e14c2fb86071001 upstream. rpm_active indicates how many times the supplier usage_count has been incremented. Consequently it must be updated after pm_runtime_get_sync() of the supplier, not before. Fixes: 4c06c4e6cf63 ("driver core: Fix possible supplier PM-usage counter imbalance") Signed-off-by: Adrian Hunter Cc: 5.1+ # 5.1+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

PM: runtime: Fix race getting/putting suppliers at probe

2021-04-07T12:47:42Z

commit 9dfacc54a8661bc8be6e08cffee59596ec59f263 upstream. pm_runtime_put_suppliers() must not decrement rpm_active unless the consumer is suspended. That is because, otherwise, it could suspend suppliers for an active consumer. That can happen as follows: static int driver_probe_device(struct device_driver *drv, struct device *dev) { int ret = 0; if (!device_is_registered(dev)) return -ENODEV; dev->can_match = true; pr_debug("bus: '%s': %s: matched device %s with driver %s\n", drv->bus->name, __func__, dev_name(dev), drv->name); pm_runtime_get_suppliers(dev); if (dev->parent) pm_runtime_get_sync(dev->parent); At this point, dev can runtime suspend so rpm_put_suppliers() can run, rpm_active becomes 1 (the lowest value). pm_runtime_barrier(dev); if (initcall_debug) ret = really_probe_debug(dev, drv); else ret = really_probe(dev, drv); Probe callback can have runtime resumed dev, and then runtime put so dev is awaiting autosuspend, but rpm_active is 2. pm_request_idle(dev); if (dev->parent) pm_runtime_put(dev->parent); pm_runtime_put_suppliers(dev); Now pm_runtime_put_suppliers() will put the supplier i.e. rpm_active 2 -> 1, but consumer can still be active. return ret; } Fix by checking the runtime status. For any status other than RPM_SUSPENDED, rpm_active can be considered to be "owned" by rpm_[get/put]_suppliers() and pm_runtime_put_suppliers() need do nothing. Reported-by: Asutosh Das Fixes: 4c06c4e6cf63 ("driver core: Fix possible supplier PM-usage counter imbalance") Signed-off-by: Adrian Hunter Cc: 5.1+ # 5.1+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

PM: runtime: Defer suspending suppliers

2021-03-30T12:35:27Z

[ Upstream commit 5244f5e2d801259af877ee759e8c22364c607072 ] Because the PM-runtime status of the device is not updated in __rpm_callback(), attempts to suspend the suppliers of the given device triggered by the rpm_put_suppliers() call in there may cause a supplier to be suspended completely before the status of the consumer is updated to RPM_SUSPENDED, which is confusing. To avoid that (1) modify __rpm_callback() to only decrease the PM-runtime usage counter of each supplier and (2) make rpm_suspend() try to suspend the suppliers after changing the consumer's status to RPM_SUSPENDED, in analogy with the device's parent. Link: https://lore.kernel.org/linux-pm/CAPDyKFqm06KDw_p8WXsM4dijDbho4bb6T4k50UqqvR1_COsp8g@mail.gmail.com/ Fixes: 21d5c57b3726 ("PM / runtime: Use device links") Reported-by: elaine.zhang Diagnosed-by: Ulf Hansson Reviewed-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

Revert "PM: runtime: Update device status before letting suppliers suspend"

2021-03-24T10:26:35Z

commit 0cab893f409c53634d0d818fa414641cbcdb0dab upstream. Revert commit 44cc89f76464 ("PM: runtime: Update device status before letting suppliers suspend") that introduced a race condition into __rpm_callback() which allowed a concurrent rpm_resume() to run and resume the device prematurely after its status had been changed to RPM_SUSPENDED by __rpm_callback(). Fixes: 44cc89f76464 ("PM: runtime: Update device status before letting suppliers suspend") Link: https://lore.kernel.org/linux-pm/24dfb6fc-5d54-6ee2-9195-26428b7ecf8a@intel.com/ Reported-by: Adrian Hunter Cc: 4.10+ # 4.10+ Signed-off-by: Rafael J. Wysocki Reviewed-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

software node: Fix node registration

2021-03-17T16:03:48Z

commit 8891123f9cbb9c1ee531e5a87fa116f0af685c48 upstream. Software node can not be registered before its parent. Fixes: 80488a6b1d3c ("software node: Add support for static node descriptors") Cc: 5.10+ # 5.10+ Signed-off-by: Heikki Krogerus Reviewed-by: Andy Shevchenko Tested-by: Andy Shevchenko Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

PM: runtime: Update device status before letting suppliers suspend

2021-03-09T10:09:37Z

commit 44cc89f764646b2f1f2ea5d1a08b230131707851 upstream. Because the PM-runtime status of the device is not updated in __rpm_callback(), attempts to suspend the suppliers of the given device triggered by rpm_put_suppliers() called by it may fail. Fix this by making __rpm_callback() update the device's status to RPM_SUSPENDED before calling rpm_put_suppliers() if the current status of the device is RPM_SUSPENDING and the callback just invoked by it has returned 0 (success). While at it, modify the code in __rpm_callback() to always check the device's PM-runtime status under its PM lock. Link: https://lore.kernel.org/linux-pm/CAPDyKFqm06KDw_p8WXsM4dijDbho4bb6T4k50UqqvR1_COsp8g@mail.gmail.com/ Fixes: 21d5c57b3726 ("PM / runtime: Use device links") Reported-by: Elaine Zhang Diagnosed-by: Ulf Hansson Signed-off-by: Rafael J. Wysocki Tested-by: Elaine Zhang Reviewed-by: Ulf Hansson Cc: 4.10+ # 4.10+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

regmap: sdw: use _no_pm functions in regmap_read/write

2021-03-04T09:26:37Z

[ Upstream commit d288a5712ef961e16d588bbdb2d846e00b5ef154 ] sdw_update_slave_status will be invoked when a codec is attached, and the codec driver will initialize the codec with regmap functions while the codec device is pm_runtime suspended. regmap routines currently rely on regular SoundWire IO functions, which will call pm_runtime_get_sync()/put_autosuspend. This causes a deadlock where the resume routine waits for an initialization complete signal that while the initialization complete can only be reached when the resume completes. The only solution if we allow regmap functions to be used in resume operations as well as during codec initialization is to use _no_pm routines. The duty of making sure the bus is operational needs to be handled above the regmap level. Fixes: 7c22ce6e21840 ('regmap: Add SoundWire bus support') Signed-off-by: Bard Liao Acked-by: Mark Brown Link: https://lore.kernel.org/r/20210122070634.12825-6-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

media: software_node: Fix refcounts in software_node_get_next_child()

2021-03-04T09:26:22Z

[ Upstream commit fb5ec981adf08b94e6ce27ca16b7765c94f4513c ] The software_node_get_next_child() function currently does not hold references to the child software_node that it finds or put the ref that is held against the old child - fix that. Fixes: 59abd83672f7 ("drivers: base: Introducing software nodes to the firmware node framework") Reviewed-by: Andy Shevchenko Reviewed-by: Laurent Pinchart Signed-off-by: Daniel Scally Reviewed-by: Heikki Krogerus Acked-by: Greg Kroah-Hartman Acked-by: Rafael J. Wysocki Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin

driver core: Extend device_is_dependent()

2021-01-27T10:47:51Z

commit 3d1cf435e201d1fd63e4346b141881aed086effd upstream. If the device passed as the target (second argument) to device_is_dependent() is not completely registered (that is, it has been initialized, but not added yet), but the parent pointer of it is set, it may be missing from the list of the parent's children and device_for_each_child() called by device_is_dependent() cannot be relied on to catch that dependency. For this reason, modify device_is_dependent() to check the ancestors of the target device by following its parent pointer in addition to the device_for_each_child() walk. Fixes: 9ed9895370ae ("driver core: Functional dependencies tracking support") Reported-by: Stephan Gerhold Tested-by: Stephan Gerhold Reviewed-by: Saravana Kannan Signed-off-by: Rafael J. Wysocki Link: https://lore.kernel.org/r/17705994.d592GUb2YH@kreacher Cc: stable Signed-off-by: Greg Kroah-Hartman

regmap: debugfs: Fix a reversed if statement in regmap_debugfs_init()

2021-01-17T13:05:38Z

commit f6bcb4c7f366905b66ce8ffca7190118244bb642 upstream. This code will leak "map->debugfs_name" because the if statement is reversed so it only frees NULL pointers instead of non-NULL. In fact the if statement is not required and should just be removed because kfree() accepts NULL pointers. Fixes: cffa4b2122f5 ("regmap: debugfs: Fix a memory leak when calling regmap_attach_dev") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/X/RQpfAwRdLg0GqQ@mwanda Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman