user/sven/linux.git/drivers/block/loop.c, branch v3.8.4

loopdev: remove an user triggerable oops

2013-03-20T20:10:57Z

commit b1a6650406875b9097a032eed89af50682fe1160 upstream. When loopdev is built as module and we pass an invalid parameter, loop_init() will return directly without deregister misc device, which will cause an oops when insert loop module next time because we left some garbage in the misc device list. Test case: sudo modprobe loop max_part=1024 (failed due to invalid parameter) sudo modprobe loop (oops) Clean up nicely to avoid such oops. Signed-off-by: Guo Chao Cc: Alexander Viro Cc: Guo Chao Cc: M. Hindess Cc: Nikanth Karthikesan Cc: Jens Axboe Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe Acked-by: Jeff Mahoney Signed-off-by: Greg Kroah-Hartman

loopdev: fix a deadlock

2013-03-20T20:10:57Z

commit 5370019dc2d2c2ff90e95d181468071362934f3a upstream. bd_mutex and lo_ctl_mutex can be held in different order. Path #1: blkdev_open blkdev_get __blkdev_get (hold bd_mutex) lo_open (hold lo_ctl_mutex) Path #2: blkdev_ioctl lo_ioctl (hold lo_ctl_mutex) lo_set_capacity (hold bd_mutex) Lockdep does not report it, because path #2 actually holds a subclass of lo_ctl_mutex. This subclass seems creep into the code by mistake. The patch author actually just mentioned it in the changelog, see commit f028f3b2 ("loop: fix circular locking in loop_clr_fd()"), also see: http://marc.info/?l=linux-kernel&m=123806169129727&w=2 Path #2 hold bd_mutex to call bd_set_size(), I've protected it with i_mutex in a previous patch, so drop bd_mutex at this site. Signed-off-by: Guo Chao Cc: Alexander Viro Cc: Guo Chao Cc: M. Hindess Cc: Nikanth Karthikesan Cc: Jens Axboe Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe Acked-by: Jeff Mahoney Signed-off-by: Greg Kroah-Hartman

Merge branch 'for-3.8/drivers' of git://git.kernel.dk/linux-block

2012-12-17T21:39:11Z

Pull block driver update from Jens Axboe: "Now that the core bits are in, here are the driver bits for 3.8. The branch contains: - A huge pile of drbd bits that were dumped from the 3.7 merge window. Following that, it was both made perfectly clear that there is going to be no more over-the-wall pulls and how the situation on individual pulls can be improved. - A few cleanups from Akinobu Mita for drbd and cciss. - Queue improvement for loop from Lukas. This grew into adding a generic interface for waiting/checking an even with a specific lock, allowing this to be pulled out of md and now loop and drbd is also using it. - A few fixes for xen back/front block driver from Roger Pau Monne. - Partition improvements from Stephen Warren, allowing partiion UUID to be used as an identifier." * 'for-3.8/drivers' of git://git.kernel.dk/linux-block: (609 commits) drbd: update Kconfig to match current dependencies drbd: Fix drbdsetup wait-connect, wait-sync etc... commands drbd: close race between drbd_set_role and drbd_connect drbd: respect no-md-barriers setting also when changed online via disk-options drbd: Remove obsolete check drbd: fixup after wait_even_lock_irq() addition to generic code loop: Limit the number of requests in the bio list wait: add wait_event_lock_irq() interface xen-blkfront: free allocated page xen-blkback: move free persistent grants code block: partition: msdos: provide UUIDs for partitions init: reduce PARTUUID min length to 1 from 36 block: store partition_meta_info.uuid as a string cciss: use check_signature() cciss: cleanup bitops usage drbd: use copy_highpage drbd: if the replication link breaks during handshake, keep retrying drbd: check return of kmalloc in receive_uuids drbd: Broadcast sync progress no more often than once per second drbd: don't try to clear bits once the disk has failed ...

loop: Limit the number of requests in the bio list

2012-11-30T10:48:05Z

Currently there is not limitation of number of requests in the loop bio list. This can lead into some nasty situations when the caller spawns tons of bio requests taking huge amount of memory. This is even more obvious with discard where blkdev_issue_discard() will submit all bios for the range and wait for them to finish afterwards. On really big loop devices and slow backing file system this can lead to OOM situation as reported by Dave Chinner. With this patch we will wait in loop_make_request() if the number of bios in the loop bio list would exceed 'nr_congestion_on'. We'll wake up the process as we process the bios form the list. Some threshold hysteresis is in place to avoid high frequency oscillation. Signed-off-by: Lukas Czerner Reported-by: Dave Chinner Signed-off-by: Jens Axboe

loop: Make explicit loop device destruction lazy

2012-10-30T07:37:31Z

xfstests has always had random failures of tests due to loop devices failing to be torn down and hence leaving filesytems that cannot be unmounted. This causes test runs to immediately stop. Over the past 6 or 7 years we've added hacks like explicit unmount -d commands for loop mounts, losetup -d after unmount -d fails, etc, but still the problems persist. Recently, the frequency of loop related failures increased again to the point that xfstests 259 will reliably fail with a stray loop device that was not torn down. That is despite the fact the test is above as simple as it gets - loop 5 or 6 times running mkfs.xfs with different paramters: lofile=$(losetup -f) losetup $lofile "$testfile" "$MKFS_XFS_PROG" -b size=512 $lofile >/dev/null || echo "mkfs failed!" sync losetup -d $lofile And losteup -d $lofile is failing with EBUSY on 1-3 of these loops every time the test is run. Turns out that blkid is running simultaneously with losetup -d, and so it sees an elevated reference count and returns EBUSY. But why is blkid running? It's obvious, isn't it? udev has decided to try and find out what is on the block device as a result of a creation notification. And it is racing with mkfs, so might still be scanning the device when mkfs finishes and we try to tear it down. So, make losetup -d force autoremove behaviour. That is, when the last reference goes away, tear down the device. xfstests wants it *gone*, not causing random teardown failures when we know that all the operations the tests have specifically run on the device have completed and are no longer referencing the loop device. Signed-off-by: Dave Chinner Signed-off-by: Jens Axboe

userns: Convert loop to use kuid_t instead of uid_t

2012-09-21T10:13:20Z

Cc: Jens Axboe Acked-by: Serge Hallyn Signed-off-by: Eric W. Biederman

blk: fix wrong idr_pre_get() error check in loop.c

2012-07-14T22:39:58Z

The idr_pre_get() function never returns a value < 0. It returns 0 (no memory) or 1 (OK). Reported-by: Silva Paulo [ Rewrote Silva's patch, but attributing it to Silva anyway - Linus ] Signed-off-by: Linus Torvalds

block: remove the second argument of k[un]map_atomic()

2012-03-20T13:48:16Z

Signed-off-by: Cong Wang

loop: zero fill bio instead of return -EIO for partial read

2012-02-08T21:07:19Z

commit 8268f5a741 ("deny partial write for loop dev fd") tried to fix the loop device partial read information leak problem. But it changed the semantics of read behavior. When we read beyond the end of the device we should get 0 bytes, which is normal behavior, we should not just return -EIO Instead of returning -EIO, zero out the bio to avoid information leak in case of partail read. Signed-off-by: Dave Young Reviewed-by: Jeff Moyer Tested-by: Jeff Moyer Cc: Dmitry Monakhov Signed-off-by: Andrew Morton Signed-off-by: Jens Axboe

fs: move code out of buffer.c

2012-01-04T03:54:07Z

Move invalidate_bdev, block_sync_page into fs/block_dev.c. Export kill_bdev as well, so brd doesn't have to open code it. Reduce buffer_head.h requirement accordingly. Removed a rather large comment from invalidate_bdev, as it looked a bit obsolete to bother moving. The small comment replacing it says enough. Signed-off-by: Nick Piggin Cc: Al Viro Cc: Christoph Hellwig Signed-off-by: Andrew Morton Signed-off-by: Al Viro