user/sven/linux.git/drivers/block, branch v4.15.11

loop: Fix lost writes caused by missing flag

2018-03-15T09:56:49Z

commit 1d037577c323e5090ce281e96bc313ab2eee5be2 upstream. The following commit: commit aa4d86163e4e ("block: loop: switch to VFS ITER_BVEC") replaced __do_lo_send_write(), which used ITER_KVEC iterators, with lo_write_bvec() which uses ITER_BVEC iterators. In this change, though, the WRITE flag was lost: - iov_iter_kvec(&from, ITER_KVEC | WRITE, &kvec, 1, len); + iov_iter_bvec(&i, ITER_BVEC, bvec, 1, bvec->bv_len); This flag is necessary for the DAX case because we make decisions based on whether or not the iterator is a READ or a WRITE in dax_iomap_actor() and in dax_iomap_rw(). We end up going through this path in configurations where we combine a PMEM device with 4k sectors, a loopback device and DAX. The consequence of this missed flag is that what we intend as a write actually turns into a read in the DAX code, so no data is ever written. The very simplest test case is to create a loopback device and try and write a small string to it, then hexdump a few bytes of the device to see if the write took. Without this patch you read back all zeros, with this you read back the string you wrote. For XFS this causes us to fail or panic during the following xfstests: xfs/074 xfs/078 xfs/216 xfs/217 xfs/250 For ext4 we have a similar issue where writes never happen, but we don't currently have any xfstests that use loopback and show this issue. Fix this by restoring the WRITE flag argument to iov_iter_bvec(). This causes the xfstests to all pass. Cc: Al Viro Cc: stable@vger.kernel.org Fixes: commit aa4d86163e4e ("block: loop: switch to VFS ITER_BVEC") Reviewed-by: Christoph Hellwig Reviewed-by: Ming Lei Signed-off-by: Ross Zwisler Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

rbd: whitelist RBD_FEATURE_OPERATIONS feature bit

2018-02-22T14:40:07Z

commit e573427a440fd67d3f522357d7ac901d59281948 upstream. This feature bit restricts older clients from performing certain maintenance operations against an image (e.g. clone, snap create). krbd does not perform maintenance operations. Cc: stable@vger.kernel.org Signed-off-by: Ilya Dryomov Reviewed-by: Jason Dillaman Signed-off-by: Greg Kroah-Hartman

pktcdvd: Fix a recently introduced NULL pointer dereference

2018-02-16T19:06:58Z

commit 882d4171a8950646413b1a3cbe0e4a6a612fe82e upstream. Call bdev_get_queue(bdev) after bdev->bd_disk has been initialized instead of just before that pointer has been initialized. This patch avoids that the following command pktsetup 1 /dev/sr0 triggers the following kernel crash: BUG: unable to handle kernel NULL pointer dereference at 0000000000000548 IP: pkt_setup_dev+0x2db/0x670 [pktcdvd] CPU: 2 PID: 724 Comm: pktsetup Not tainted 4.15.0-rc4-dbg+ #1 Call Trace: pkt_ctl_ioctl+0xce/0x1c0 [pktcdvd] do_vfs_ioctl+0x8e/0x670 SyS_ioctl+0x3c/0x70 entry_SYSCALL_64_fastpath+0x23/0x9a Reported-by: Maciej S. Szmigiero Fixes: commit ca18d6f769d2 ("block: Make most scsi_req_init() calls implicit") Signed-off-by: Bart Van Assche Tested-by: Maciej S. Szmigiero Cc: Maciej S. Szmigiero Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

pktcdvd: Fix pkt_setup_dev() error path

2018-02-16T19:06:58Z

commit 5a0ec388ef0f6e33841aeb810d7fa23f049ec4cd upstream. Commit 523e1d399ce0 ("block: make gendisk hold a reference to its queue") modified add_disk() and disk_release() but did not update any of the error paths that trigger a put_disk() call after disk->queue has been assigned. That introduced the following behavior in the pktcdvd driver if pkt_new_dev() fails: Kernel BUG at 00000000e98fd882 [verbose debug info unavailable] Since disk_release() calls blk_put_queue() anyway if disk->queue != NULL, fix this by removing the blk_cleanup_queue() call from the pkt_setup_dev() error path. Fixes: commit 523e1d399ce0 ("block: make gendisk hold a reference to its queue") Signed-off-by: Bart Van Assche Cc: Tejun Heo Cc: Maciej S. Szmigiero Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

Merge tag 'ceph-for-4.15-rc8' of git://github.com/ceph/ceph-client

2018-01-12T00:57:32Z

Pull ceph fixes from Ilya Dryomov: "Two rbd fixes for 4.12 and 4.2 issues respectively, marked for stable" * tag 'ceph-for-4.15-rc8' of git://github.com/ceph/ceph-client: rbd: set max_segments to USHRT_MAX rbd: reacquire lock should update lock owner client id

rbd: set max_segments to USHRT_MAX

2018-01-09T16:40:48Z

Commit d3834fefcfe5 ("rbd: bump queue_max_segments") bumped max_segments (unsigned short) to max_hw_sectors (unsigned int). max_hw_sectors is set to the number of 512-byte sectors in an object and overflows unsigned short for 32M (largest possible) objects, making the block layer resort to handing us single segment (i.e. single page or even smaller) bios in that case. Cc: stable@vger.kernel.org Fixes: d3834fefcfe5 ("rbd: bump queue_max_segments") Signed-off-by: Ilya Dryomov Reviewed-by: Alex Elder

rbd: reacquire lock should update lock owner client id

2018-01-09T16:40:21Z

Otherwise, future operations on this RBD using exclusive-lock are going to require the lock from a non-existent client id. Cc: stable@vger.kernel.org Fixes: 14bb211d324d ("rbd: support updating the lock cookie without releasing the lock") Link: http://tracker.ceph.com/issues/19929 Signed-off-by: Florian Margaine [idryomov@gmail.com: rbd_set_owner_cid() call, __rbd_lock() helper] Signed-off-by: Ilya Dryomov

loop: fix concurrent lo_open/lo_release

2018-01-06T16:32:07Z

范龙飞 reports that KASAN can report a use-after-free in __lock_acquire. The reason is due to insufficient serialization in lo_release(), which will continue to use the loop device even after it has decremented the lo_refcnt to zero. In the meantime, another process can come in, open the loop device again as it is being shut down. Confusion ensues. Reported-by: 范龙飞 Signed-off-by: Linus Torvalds Signed-off-by: Jens Axboe

null_blk: unalign call_single_data

2017-12-20T20:16:33Z

Commit 966a967116e6 randomly added alignment to this structure, but it's actually detrimental to performance of null_blk. Test case: Running on both the home and remote node shows a ~5% degradation in performance. While in there, move blk_status_t to the hole after the integer tag in the nullb_cmd structure. After this patch, we shrink the size from 192 to 152 bytes. Fixes: 966a967116e69 ("smp: Avoid using two cache lines for struct call_single_data") Signed-off-by: Jens Axboe

Merge branch 'for-linus' of git://git.kernel.dk/linux-block

2017-12-01T13:05:45Z

Pull block fixes from Jens Axboe: "A selection of fixes/changes that should make it into this series. This contains: - NVMe, two merges, containing: - pci-e, rdma, and fc fixes - Device quirks - Fix for a badblocks leak in null_blk - bcache fix from Rui Hua for a race condition regression where -EINTR was returned to upper layers that didn't expect it. - Regression fix for blktrace for a bug introduced in this series. - blktrace cleanup for cgroup id. - bdi registration error handling. - Small series with cleanups for blk-wbt. - Various little fixes for typos and the like. Nothing earth shattering, most important are the NVMe and bcache fixes" * 'for-linus' of git://git.kernel.dk/linux-block: (34 commits) nvme-pci: fix NULL pointer dereference in nvme_free_host_mem() nvme-rdma: fix memory leak during queue allocation blktrace: fix trace mutex deadlock nvme-rdma: Use mr pool nvme-rdma: Check remotely invalidated rkey matches our expected rkey nvme-rdma: wait for local invalidation before completing a request nvme-rdma: don't complete requests before a send work request has completed nvme-rdma: don't suppress send completions bcache: check return value of register_shrinker bcache: recover data from backing when data is clean bcache: Fix building error on MIPS bcache: add a comment in journal bucket reading nvme-fc: don't use bit masks for set/test_bit() numbers blk-wbt: fix comments typo blk-wbt: move wbt_clear_stat to common place in wbt_done blk-sysfs: remove NULL pointer checking in queue_wb_lat_store blk-wbt: remove duplicated setting in wbt_init nvme-pci: add quirk for delay before CHK RDY for WDC SN200 block: remove useless assignment in bio_split null_blk: fix dev->badblocks leak ...