user/sven/linux.git/drivers/block, branch v4.4.271

xen-blkback: don't leak persistent grants from xen_blkbk_map()

2021-03-30T12:45:01Z

commit a846738f8c3788d846ed1f587270d2f2e3d32432 upstream. The fix for XSA-365 zapped too many of the ->persistent_gnt[] entries. Ones successfully obtained should not be overwritten, but instead left for xen_blkbk_unmap_prepare() to pick up and put. This is XSA-371. Signed-off-by: Jan Beulich Cc: stable@vger.kernel.org Reviewed-by: Juergen Gross Reviewed-by: Wei Liu Signed-off-by: Juergen Gross Signed-off-by: Greg Kroah-Hartman

block: rsxx: fix error return code of rsxx_pci_probe()

2021-03-17T15:07:23Z

[ Upstream commit df66617bfe87487190a60783d26175b65d2502ce ] When create_singlethread_workqueue returns NULL to card->event_wq, no error return code of rsxx_pci_probe() is assigned. To fix this bug, st is assigned with -ENOMEM in this case. Fixes: 8722ff8cdbfa ("block: IBM RamSan 70/80 device driver") Reported-by: TOTE Robot Signed-off-by: Jia-Ju Bai Link: https://lore.kernel.org/r/20210310033017.4023-1-baijiaju1990@gmail.com Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

floppy: fix lock_fdc() signal handling

2021-03-17T15:07:19Z

commit a0c80efe5956ccce9fe7ae5c78542578c07bc20a upstream. floppy_revalidate() doesn't perform any error handling on lock_fdc() result. lock_fdc() might actually be interrupted by a signal (it waits for fdc becoming non-busy interruptibly). In such case, floppy_revalidate() proceeds as if it had claimed the lock, but it fact it doesn't. In case of multiple threads trying to open("/dev/fdX"), this leads to serious corruptions all over the place, because all of a sudden there is no critical section protection (that'd otherwise be guaranteed by locked fd) whatsoever. While at this, fix the fact that the 'interruptible' parameter to lock_fdc() doesn't make any sense whatsoever, because we always wait interruptibly anyway. Most of the lock_fdc() callsites do properly handle error (and propagate EINTR), but floppy_revalidate() and floppy_check_events() don't. Fix this. Spotted by 'syzkaller' tool. Reported-by: Dmitry Vyukov Tested-by: Dmitry Vyukov Signed-off-by: Jiri Kosina Cc: Wade Mealing Signed-off-by: Greg Kroah-Hartman

rsxx: Return -EFAULT if copy_to_user() fails

2021-03-11T12:46:35Z

[ Upstream commit 77516d25f54912a7baedeeac1b1b828b6f285152 ] The copy_to_user() function returns the number of bytes remaining but we want to return -EFAULT to the user if it can't complete the copy. The "st" variable only holds zero on success or negative error codes on failure so the type should be int. Fixes: 36f988e978f8 ("rsxx: Adding in debugfs entries.") Signed-off-by: Dan Carpenter Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

zsmalloc: account the number of compacted pages correctly

2021-03-07T10:24:22Z

commit 2395928158059b8f9858365fce7713ce7fef62e4 upstream. There exists multiple path may do zram compaction concurrently. 1. auto-compaction triggered during memory reclaim 2. userspace utils write zram/compaction node So, multiple threads may call zs_shrinker_scan/zs_compact concurrently. But pages_compacted is a per zsmalloc pool variable and modification of the variable is not serialized(through under class->lock). There are two issues here: 1. the pages_compacted may not equal to total number of pages freed(due to concurrently add). 2. zs_shrinker_scan may not return the correct number of pages freed(issued by current shrinker). The fix is simple: 1. account the number of pages freed in zs_compact locally. 2. use actomic variable pages_compacted to accumulate total number. Link: https://lkml.kernel.org/r/20210202122235.26885-1-wu-yan@tcl.com Fixes: 860c707dca155a56 ("zsmalloc: account the number of compacted pages") Signed-off-by: Rokudo Yan Cc: Minchan Kim Cc: Sergey Senozhatsky Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

floppy: reintroduce O_NDELAY fix

2021-03-03T15:44:22Z

commit 8a0c014cd20516ade9654fc13b51345ec58e7be8 upstream. This issue was originally fixed in 09954bad4 ("floppy: refactor open() flags handling"). The fix as a side-effect, however, introduce issue for open(O_ACCMODE) that is being used for ioctl-only open. I wrote a fix for that, but instead of it being merged, full revert of 09954bad4 was performed, re-introducing the O_NDELAY / O_NONBLOCK issue, and it strikes again. This is a forward-port of the original fix to current codebase; the original submission had the changelog below: ==== Commit 09954bad4 ("floppy: refactor open() flags handling"), as a side-effect, causes open(/dev/fdX, O_ACCMODE) to fail. It turns out that this is being used setfdprm userspace for ioctl-only open(). Reintroduce back the original behavior wrt !(FMODE_READ|FMODE_WRITE) modes, while still keeping the original O_NDELAY bug fixed. Link: https://lore.kernel.org/r/nycvar.YFH.7.76.2101221209060.5622@cbobk.fhfr.pm Cc: stable@vger.kernel.org Reported-by: Wim Osterholt Tested-by: Wim Osterholt Reported-and-tested-by: Kurt Garloff Fixes: 09954bad4 ("floppy: refactor open() flags handling") Fixes: f2791e7ead ("Revert "floppy: refactor open() flags handling"") Signed-off-by: Jiri Kosina Signed-off-by: Denis Efremov Signed-off-by: Greg Kroah-Hartman

block: Move SECTOR_SIZE and SECTOR_SHIFT definitions into

2021-03-03T15:44:21Z

commit 233bde21aa43516baa013ef7ac33f3427056db3e upstream. It happens often while I'm preparing a patch for a block driver that I'm wondering: is a definition of SECTOR_SIZE and/or SECTOR_SHIFT available for this driver? Do I have to introduce definitions of these constants before I can use these constants? To avoid this confusion, move the existing definitions of SECTOR_SIZE and SECTOR_SHIFT into the header file such that these become available for all block drivers. Make the SECTOR_SIZE definition in the uapi msdos_fs.h header file conditional to avoid that including that header file after causes the compiler to complain about a SECTOR_SIZE redefinition. Note: the SECTOR_SIZE / SECTOR_SHIFT / SECTOR_BITS definitions have not been removed from uapi header files nor from NAND drivers in which these constants are used for another purpose than converting block layer offsets and sizes into a number of sectors. Cc: David S. Miller Cc: Mike Snitzer Cc: Dan Williams Cc: Minchan Kim Cc: Nitin Gupta Reviewed-by: Sergey Senozhatsky Reviewed-by: Christoph Hellwig Reviewed-by: Johannes Thumshirn Reviewed-by: Martin K. Petersen Signed-off-by: Bart Van Assche Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

xen-blkback: fix error handling in xen_blkbk_map()

2021-02-23T12:58:14Z

commit 871997bc9e423f05c7da7c9178e62dde5df2a7f8 upstream. The function uses a goto-based loop, which may lead to an earlier error getting discarded by a later iteration. Exit this ad-hoc loop when an error was encountered. The out-of-memory error path additionally fails to fill a structure field looked at by xen_blkbk_unmap_prepare() before inspecting the handle which does get properly set (to BLKBACK_INVALID_HANDLE). Since the earlier exiting from the ad-hoc loop requires the same field filling (invalidation) as that on the out-of-memory path, fold both paths. While doing so, drop the pr_alert(), as extra log messages aren't going to help the situation (the kernel will log oom conditions already anyway). This is XSA-365. Signed-off-by: Jan Beulich Reviewed-by: Juergen Gross Reviewed-by: Julien Grall Signed-off-by: Juergen Gross Signed-off-by: Greg Kroah-Hartman

xen-blkback: don't "handle" error by BUG()

2021-02-23T12:58:14Z

commit 5a264285ed1cd32e26d9de4f3c8c6855e467fd63 upstream. In particular -ENOMEM may come back here, from set_foreign_p2m_mapping(). Don't make problems worse, the more that handling elsewhere (together with map's status fields now indicating whether a mapping wasn't even attempted, and hence has to be considered failed) doesn't require this odd way of dealing with errors. This is part of XSA-362. Signed-off-by: Jan Beulich Cc: stable@vger.kernel.org Reviewed-by: Juergen Gross Signed-off-by: Juergen Gross Signed-off-by: Greg Kroah-Hartman

xen-blkback: set ring->xenblkd to NULL after kthread_stop()

2021-01-30T12:25:57Z

commit 1c728719a4da6e654afb9cc047164755072ed7c9 upstream. When xen_blkif_disconnect() is called, the kernel thread behind the block interface is stopped by calling kthread_stop(ring->xenblkd). The ring->xenblkd thread pointer being non-NULL determines if the thread has been already stopped. Normally, the thread's function xen_blkif_schedule() sets the ring->xenblkd to NULL, when the thread's main loop ends. However, when the thread has not been started yet (i.e. wake_up_process() has not been called on it), the xen_blkif_schedule() function would not be called yet. In such case the kthread_stop() call returns -EINTR and the ring->xenblkd remains dangling. When this happens, any consecutive call to xen_blkif_disconnect (for example in frontend_changed() callback) leads to a kernel crash in kthread_stop() (e.g. NULL pointer dereference in exit_creds()). This is XSA-350. Cc: # 4.12 Fixes: a24fa22ce22a ("xen/blkback: don't use xen_blkif_get() in xen-blkback kthread") Reported-by: Olivier Benjamin Reported-by: Pawel Wieczorkiewicz Signed-off-by: Pawel Wieczorkiewicz Reviewed-by: Julien Grall Reviewed-by: Juergen Gross Signed-off-by: Juergen Gross [iwamatsu: change from ring to blkif] Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Greg Kroah-Hartman