user/sven/linux.git/drivers/block, branch v5.5.11

virtio-blk: fix hw_queue stopped on arbitrary error

2020-03-18T06:19:08Z

commit f5f6b95c72f7f8bb46eace8c5306c752d0133daa upstream. Since nobody else is going to restart our hw_queue for us, the blk_mq_start_stopped_hw_queues() is in virtblk_done() is not sufficient necessarily sufficient to ensure that the queue will get started again. In case of global resource outage (-ENOMEM because mapping failure, because of swiotlb full) our virtqueue may be empty and we can get stuck with a stopped hw_queue. Let us not stop the queue on arbitrary errors, but only on -EONSPC which indicates a full virtqueue, where the hw_queue is guaranteed to get started by virtblk_done() before when it makes sense to carry on submitting requests. Let us also remove a stale comment. Signed-off-by: Halil Pasic Cc: Jens Axboe Fixes: f7728002c1c7 ("virtio_ring: fix return code on DMA mapping fails") Link: https://lore.kernel.org/r/20200213123728.61216-2-pasic@linux.ibm.com Signed-off-by: Michael S. Tsirkin Reviewed-by: Stefan Hajnoczi Signed-off-by: Greg Kroah-Hartman

floppy: check FDC index for errors before assigning it

2020-02-28T16:23:30Z

commit 2e90ca68b0d2f5548804f22f0dd61145516171e3 upstream. Jordy Zomer reported a KASAN out-of-bounds read in the floppy driver in wait_til_ready(). Which on the face of it can't happen, since as Willy Tarreau points out, the function does no particular memory access. Except through the FDCS macro, which just indexes a static allocation through teh current fdc, which is always checked against N_FDC. Except the checking happens after we've already assigned the value. The floppy driver is a disgrace (a lot of it going back to my original horrd "design"), and has no real maintainer. Nobody has the hardware, and nobody really cares. But it still gets used in virtual environment because it's one of those things that everybody supports. The whole thing should be re-written, or at least parts of it should be seriously cleaned up. The 'current fdc' index, which is used by the FDCS macro, and which is often shadowed by a local 'fdc' variable, is a prime example of how not to write code. But because nobody has the hardware or the motivation, let's just fix up the immediate problem with a nasty band-aid: test the fdc index before actually assigning it to the static 'fdc' variable. Reported-by: Jordy Zomer Cc: Willy Tarreau Cc: Dan Carpenter Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

brd: check and limit max_part par

2020-02-24T07:38:49Z

[ Upstream commit c8ab422553c81a0eb070329c63725df1cd1425bc ] In brd_init func, rd_nr num of brd_device are firstly allocated and add in brd_devices, then brd_devices are traversed to add each brd_device by calling add_disk func. When allocating brd_device, the disk->first_minor is set to i * max_part, if rd_nr * max_part is larger than MINORMASK, two different brd_device may have the same devt, then only one of them can be successfully added. when rmmod brd.ko, it will cause oops when calling brd_exit. Follow those steps: # modprobe brd rd_nr=3 rd_size=102400 max_part=1048576 # rmmod brd then, the oops will appear. Oops log: [ 726.613722] Call trace: [ 726.614175] kernfs_find_ns+0x24/0x130 [ 726.614852] kernfs_find_and_get_ns+0x44/0x68 [ 726.615749] sysfs_remove_group+0x38/0xb0 [ 726.616520] blk_trace_remove_sysfs+0x1c/0x28 [ 726.617320] blk_unregister_queue+0x98/0x100 [ 726.618105] del_gendisk+0x144/0x2b8 [ 726.618759] brd_exit+0x68/0x560 [brd] [ 726.619501] __arm64_sys_delete_module+0x19c/0x2a0 [ 726.620384] el0_svc_common+0x78/0x130 [ 726.621057] el0_svc_handler+0x38/0x78 [ 726.621738] el0_svc+0x8/0xc [ 726.622259] Code: aa0203f6 aa0103f7 aa1e03e0 d503201f (7940e260) Here, we add brd_check_and_reset_par func to check and limit max_part par. -- V5->V6: - remove useless code V4->V5:(suggested by Ming Lei) - make sure max_part is not larger than DISK_MAX_PARTS V3->V4:(suggested by Ming Lei) - remove useless change - add one limit of max_part V2->V3: (suggested by Ming Lei) - clear .minors when running out of consecutive minor space in brd_alloc - remove limit of rd_nr V1->V2: - add more checks in brd_check_par_valid as suggested by Ming Lei. Signed-off-by: Zhiqiang Liu Reviewed-by: Bob Liu Reviewed-by: Ming Lei Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

rbd: work around -Wuninitialized warning

2020-02-24T07:38:44Z

[ Upstream commit a55e601b2f02df5db7070e9a37bd655c9c576a52 ] gcc -O3 warns about a dummy variable that is passed down into rbd_img_fill_nodata without being initialized: drivers/block/rbd.c: In function 'rbd_img_fill_nodata': drivers/block/rbd.c:2573:13: error: 'dummy' is used uninitialized in this function [-Werror=uninitialized] fctx->iter = *fctx->pos; Since this is a dummy, I assume the warning is harmless, but it's better to initialize it anyway and avoid the warning. Fixes: mmtom ("init/Kconfig: enable -O3 for all arches") Signed-off-by: Arnd Bergmann Reviewed-by: Ilya Dryomov Signed-off-by: Ilya Dryomov Signed-off-by: Sasha Levin

drivers/block/zram/zram_drv.c: fix error return codes not being returned in writeback_store

2020-02-24T07:38:09Z

[ Upstream commit 3b82a051c10143639a378dcd12019f2353cc9054 ] Currently when an error code -EIO or -ENOSPC in the for-loop of writeback_store the error code is being overwritten by a ret = len assignment at the end of the function and the error codes are being lost. Fix this by assigning ret = len at the start of the function and remove the assignment from the end, hence allowing ret to be preserved when error codes are assigned to it. Addresses Coverity ("Unused value") Link: http://lkml.kernel.org/r/20191128122958.178290-1-colin.king@canonical.com Fixes: a939888ec38b ("zram: support idle/huge page writeback") Signed-off-by: Colin Ian King Acked-by: Minchan Kim Cc: Sergey Senozhatsky Cc: Jens Axboe Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

nbd: add a flush_workqueue in nbd_start_device

2020-02-24T07:38:09Z

[ Upstream commit 5c0dd228b5fc30a3b732c7ae2657e0161ec7ed80 ] When kzalloc fail, may cause trying to destroy the workqueue from inside the workqueue. If num_connections is m (2 < m), and NO.1 ~ NO.n (1 < n < m) kzalloc are successful. The NO.(n + 1) failed. Then, nbd_start_device will return ENOMEM to nbd_start_device_ioctl, and nbd_start_device_ioctl will return immediately without running flush_workqueue. However, we still have n recv threads. If nbd_release run first, recv threads may have to drop the last config_refs and try to destroy the workqueue from inside the workqueue. To fix it, add a flush_workqueue in nbd_start_device. Fixes: e9e006f5fcf2 ("nbd: fix max number of supported devs") Signed-off-by: Sun Ke Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

Merge tag 'block-5.5-2020-01-16' of git://git.kernel.dk/linux-block

2020-01-17T13:54:18Z

Pull block fixes from Jens Axboe: "Three fixes that should go into this release: - The 32-bit segment size fix that I mentioned last week (Ming) - Use uint for the block size (Mikulas) - A null_blk zone write handling fix (Damien)" * tag 'block-5.5-2020-01-16' of git://git.kernel.dk/linux-block: block: fix an integer overflow in logical block size null_blk: Fix zone write handling block: fix get_max_segment_size() overflow on 32bit arch

null_blk: Fix zone write handling

2020-01-15T15:18:39Z

null_zone_write() only allows writing empty and implicitly opened zones. Writing to closed and explicitly opened zones must also be allowed and the zone condition must be transitioned to implicit open if the zone is not explicitly opened already. Fixes: da644b2cc1a4 ("null_blk: add zone open, close, and finish support") Signed-off-by: Damien Le Moal Signed-off-by: Jens Axboe

Merge tag 'block-5.5-20200103' of git://git.kernel.dk/linux-block

2020-01-03T20:11:30Z

Pull block fixes from Jens Axboe: "Three fixes in here: - Fix for a missing split on default memory boundary mask (4G) (Ming) - Fix for multi-page read bio truncate (Ming) - Fix for null_blk zone close request handling (Damien)" * tag 'block-5.5-20200103' of git://git.kernel.dk/linux-block: null_blk: Fix REQ_OP_ZONE_CLOSE handling block: fix splitting segments on boundary masks block: add bio_truncate to fix guard_bio_eod

null_blk: Fix REQ_OP_ZONE_CLOSE handling

2019-12-30T15:51:46Z

In order to match ZBC defined behavior, closing an empty zone must result in the "empty" zone condition instead of the "closed" condition. Fixes: da644b2cc1a4 ("null_blk: add zone open, close, and finish support") Signed-off-by: Damien Le Moal Signed-off-by: Jens Axboe