user/sven/linux.git/drivers/bluetooth/bfusb.c, branch v3.10.65

Bluetooth: Use devm_kzalloc in bfusb.c file

2012-08-06T18:03:00Z

devm_kzalloc() eliminates the need to free memory explicitly thereby saving some cleanup code. Signed-off-by: Sachin Kamat Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan

USB: Disable hub-initiated LPM for comms devices.

2012-05-18T22:42:55Z

Hub-initiated LPM is not good for USB communications devices. Comms devices should be able to tell when their link can go into a lower power state, because they know when an incoming transmission is finished. Ideally, these devices would slam their links into a lower power state, using the device-initiated LPM, after finishing the last packet of their data transfer. If we enable the idle timeouts for the parent hubs to enable hub-initiated LPM, we will get a lot of useless LPM packets on the bus as the devices reject LPM transitions when they're in the middle of receiving data. Worse, some devices might blindly accept the hub-initiated LPM and power down their radios while they're in the middle of receiving a transmission. The Intel Windows folks are disabling hub-initiated LPM for all USB communications devices under a xHCI USB 3.0 host. In order to keep the Linux behavior as close as possible to Windows, we need to do the same in Linux. Set the disable_hub_initiated_lpm flag for for all USB communications drivers. I know there aren't currently any USB 3.0 devices that implement these class specifications, but we should be ready if they do. Signed-off-by: Sarah Sharp Cc: Marcel Holtmann Cc: Gustavo Padovan Cc: Johan Hedberg Cc: Hansjoerg Lipp Cc: Tilman Schmidt Cc: Karsten Keil Cc: Peter Korsgaard Cc: Jan Dumon Cc: Petko Manolov Cc: Steve Glendinning Cc: "John W. Linville" Cc: Kalle Valo Cc: "Luis R. Rodriguez" Cc: Jouni Malinen Cc: Vasanthakumar Thiagarajan Cc: Senthil Balasubramanian Cc: Christian Lamparter Cc: Brett Rudley Cc: Roland Vossen Cc: Arend van Spriel Cc: "Franky (Zhenhui) Lin" Cc: Kan Yan Cc: Dan Williams Cc: Jussi Kivilinna Cc: Ivo van Doorn Cc: Gertjan van Wingerde Cc: Helmut Schaa Cc: Herton Ronaldo Krzesinski Cc: Hin-Tak Leung Cc: Larry Finger Cc: Chaoming Li Cc: Daniel Drake Cc: Ulrich Kunitz Signed-off-by: Sarah Sharp

Bluetooth: Remove hci_dev->driver_data

2012-02-13T15:01:37Z

The linux device model provides dev_set/get_drvdata so we can use this to save private driver data. This also removes several unnecessary casts. Signed-off-by: David Herrmann Acked-by: Marcel Holtmann Signed-off-by: Johan Hedberg

Bluetooth: Remove HCI-owner field

2012-02-13T15:01:24Z

After unregistering an hci_dev object a bluetooth driver does not have any callbacks in the hci_dev structure left over. Therefore, there is no need to keep a reference to the module. Previously, we needed this to protect the hci-destruct callback. However, this callback is no longer available so we do not need this owner field, anymore. Drivers now call hci_unregister_dev() and they are done with the object. Signed-off-by: David Herrmann Acked-by: Marcel Holtmann Signed-off-by: Johan Hedberg

Bluetooth: bfusb: Free driver_data on USB shutdown

2012-02-13T15:01:23Z

This frees the private driver data on USB shutdown instead of using the hci-destruct callback. We already call usb_set_intfdata(intf, NULL) but we do not do the same with the hci object. This would be totally safe, though. After calling hci_unregister_dev()/hci_free_dev() the hdev object will never call any callback of us again except the destruct callback. Therefore, we can safely set the destruct callback to NULL and free the driver data right away. This allows to unload the module without waiting for the hdev device to be released. Signed-off-by: David Herrmann Acked-by: Marcel Holtmann Signed-off-by: Johan Hedberg

Merge branch 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

2012-01-07T20:03:30Z

* 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (73 commits) arm: fix up some samsung merge sysdev conversion problems firmware: Fix an oops on reading fw_priv->fw in sysfs loading file Drivers:hv: Fix a bug in vmbus_driver_unregister() driver core: remove __must_check from device_create_file debugfs: add missing #ifdef HAS_IOMEM arm: time.h: remove device.h #include driver-core: remove sysdev.h usage. clockevents: remove sysdev.h arm: convert sysdev_class to a regular subsystem arm: leds: convert sysdev_class to a regular subsystem kobject: remove kset_find_obj_hinted() m86k: gpio - convert sysdev_class to a regular subsystem mips: txx9_sram - convert sysdev_class to a regular subsystem mips: 7segled - convert sysdev_class to a regular subsystem sh: dma - convert sysdev_class to a regular subsystem sh: intc - convert sysdev_class to a regular subsystem power: suspend - convert sysdev_class to a regular subsystem power: qe_ic - convert sysdev_class to a regular subsystem power: cmm - convert sysdev_class to a regular subsystem s390: time - convert sysdev_class to a regular subsystem ... Fix up conflicts with 'struct sysdev' removal from various platform drivers that got changed: - arch/arm/mach-exynos/cpu.c - arch/arm/mach-exynos/irq-eint.c - arch/arm/mach-s3c64xx/common.c - arch/arm/mach-s3c64xx/cpu.c - arch/arm/mach-s5p64x0/cpu.c - arch/arm/mach-s5pv210/common.c - arch/arm/plat-samsung/include/plat/cpu.h - arch/powerpc/kernel/sysfs.c and fix up cpu_is_hotpluggable() as per Greg in include/linux/cpu.h

USB: convert drivers/bluetooth/* to use module_usb_driver()

2011-11-18T17:47:34Z

This converts the drivers in drivers/bluetooth/* to use the module_usb_driver() macro which makes the code smaller and a bit simpler. Added bonus is that it removes some unneeded kernel log messages about drivers loading and/or unloading. Cc: Marcel Holtmann Cc: "Gustavo F. Padovan" Signed-off-by: Greg Kroah-Hartman

Bluetooth: bfusb: Fix error path on firmware load

2011-11-07T19:24:54Z

When loading the usb-configuration we do not signal the end of configuration on memory allocation error. This patch moves the memory allocation to the top so every error path uses "goto error" now to correctly send the usb-ctrl message when detecting some error. This also replaces GFP_ATOMIC with GFP_KERNEL as we are allowed to sleep here. Signed-off-by: David Herrmann Acked-by: Marcel Holtmann Signed-off-by: Gustavo F. Padovan

Bluetooth: Ignore hci_unregister_dev return value

2011-11-07T19:24:41Z

Make all bluetooth drivers ignore the return value of hci_unregister_dev as it always returns 0. In the next step, hci_unregister_dev can be modified to return void. Some of the drivers already ignore the return value (including btusb), hence, this will increase consitency in the bluetooth drivers. Signed-off-by: David Herrmann Acked-by: Marcel Holtmann Signed-off-by: Gustavo F. Padovan

Bluetooth: bfusb: Fix error path on firmware load

2011-10-31T19:52:35Z